• Journal of the Korean Society of Food Science and Nutrition
• /
• v.20 no.3
• /
• pp.260-265
• /
• 1991

The effective method to detect the mutagenicity of N-nitrosodimethylamineI (NDMA) by using Salmonella/microsome assay was studied. The Effect of vitamin C on the mutagenicity of the formed NDMA and during the formation of NDMA from nitrite and secondary amine was also investigated. Aroclor 1254-induced hamster S9 mix was more effective in activation NDMA than rat S9 mix induced by Aroclor 1254 or phenobarbital. Dimethyl sulfoxide and ethanol suppressed the mutagenic effect of NDMA, however, phosphate butter (pH 7.4), distilled water, 95% methanol and Tween 80 + water (1 : 4) were the appropriate dissolving system in the mutagenicity test of NDMA. Vitamin C did not show any inhibitory effect on the mutagenicity of the formed NDMA. However, the revertants of Salmonella typhinutrium TA 100 were significntly reduced (p<0.05) when vitamin C was added to the reaction mixture of nitrite and dimethylamine during the formation of NDMA. The amount of the formed NDMA was analyzed using HPLC and the level was decreased by about 95%. Thus it was concluded that vitamin C inhibited greatly the formation of NDMA from nitrite and dimethylamine.

• Culinary science and hospitality research
• /
• v.21 no.5
• /
• pp.192-203
• /
• 2015

Internal marketing has been considered as a way of achieving higher service quality and customer satisfaction in the service industry. However, the definitions and implementation of internal marketing varies by researcher. Therefore, the purpose of this study was to explore an explanatory internal marketing mix that can be utilized in the foodservice industry. Using a web-based survey method, a total of 405 usable samples were collected and used in the data analysis. Five internal marketing components (i.e., vision, development, reward, employee motivation, and internal communication) were adopted from previous literature, and the results indicated significant impacts of the internal marketing mix on employee job satisfaction.

• Journal of the Korea Concrete Institute
• /
• v.14 no.1
• /
• pp.67-75
• /
• 2002

For the design of concrete structures in the serviceability limit state, the uniaxial static modulus of elasticity may be a most important parameter. In particular, this may be so just for a deflection control of the structure. Even in new concrete codes, however, the elastic modulus is normally presented on the form of general empirical relationships with the compressive strength and density of concrete. Normally, there is a large uncertainty associated with the general equations obtained by regression. Thus, in a typical plot of static modulus of elasticity vs. compressive strength, a large scatter can be observed at same strength. The aim of this study is to present the method for obtain the maximum modulus of elasticity at same compressive strength. In the present paper report the effects of mix ingredients on the modulus of elasticity of high-strength concrete. The test of 284 cylinder specimens arc conducted for type I with 11 ％ replacement of fly-ash cement concretes. Different water-hinder ratio, amounts of water and coarse aggregate as variables were investigated. And also analyzed it statistically by using SAS.

• Korean Institute of Interior Design Journal
• /
• v.21 no.3
• /
• pp.111-118
• /
• 2012

The purpose of this study is to focus on living rooms that are preferred as a place for changing space image to the maximum and to find a method how finishing materials are expressed by selecting space with mix & match of many images. The study methods are as follows. First, understand the expressive trend of space images through the precedent studies and magazines, and examine its relationship with finishing materials. Second, select space images based on the contents understood earlier and extract adjective words that represent each space image through an expert survey. Third, find the cases where space images are expressed based on the extracted words and analyze expression methods of finishing materials. The results of the study are as follows. First, it was confirmed that recent space images are actively expressed through finishing materials. Second, space images selected through data related to the trend were classified as modern+natural, modern+traditional, modern+retro, classic+natural, classic+humor, and futurism+natural and 4 adjective words for each space image were extracted. Third, expressive elements of finishing materials were extracted as 'material'. 'texture', 'color', and 'pattern' through the precedent studies. Fourth, expressive methods of finishing materials for each space image could be suggested by analyzing the examples that show mix & match based on the contents extracted earlier. Lastly, it is expected to find various methods that lead space image into finishing materials by evaluating responses and changes in visual perception of residents according to expression of finishing materials based on this study.

• Journal of Fashion Business
• /
• v.19 no.2
• /
• pp.36-52
• /
• 2015

Nowadays, firms face the challenge of how to balance between the environmental request and business profit under the circumstances of being eco-friendly and sustainable. The purpose of this study was to investigate the effects of business environmental factors on the 4p mix of an eco-friendly textile in the textile fashion firms. This research was conducted by a questionnaire method, in which the questionnaires were distributed to the textile fashion firms. Of the returned questionnaires, one hundred of them were selected to be included in the analysis by developing descriptive statistics, factor analysis, cronbach's alpha, and regression analysis using SPSS18.0. The results of this study were as follows: There were significant effects of the firms' environmental management, organizational structure, and CEOs' environmental sensitivity in descending order of the business internal factors on the textile fashion firms' eco-friendly textile product. The factors of the firms' environmental management, organizational structure(internal factors), and legal regulation(external factor), in descending order, significantly affected the promotion of the eco-friendly textile. The factor of firms' environmental management (internal factor) significantly affected the distribution of the eco-friendly textile. The factors of CEOs' environmental sensitivity(internal factor), legal regulation(external factor), and firms' environmental management(internal factor), in descending order, significantly affected the price of the eco-friendly textile.

• Resources Recycling
• /
• v.25 no.6
• /
• pp.29-40
• /
• 2016

Effects of crushed coal bottom ash (CBA) with maximum size of 1 mm on the properties of mortar with various water-to-binder ratios (w/b) were evaluated. The present work is a fundamental study to establish a method of mix proportion design for mortar and concrete with CBA. The workability, air contents, and compressive strength of mortar were measured. Efficiency of CBA on the compressive strength at 28 days, which was adopted for mix proportion design, was evaluated based on concepts of 'equivalent strength' in CEN/TR 16637. It was found that the CBA could be contributed as a binder in mortar in some cases, while in other cases act as at aggregates. The efficiency of CBA was influenced by types of CBA and their replacement ratio, and w/b of mortar.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.41 no.4
• /
• pp.59-69
• /
• 2018

This study deals with the case study on the pallet quantity determination problem for the flexible manufacturing system producing 32 different types of aircraft wing ribs which are major structures of an aircraft wings. A Korean company has constructed the WFMS (wing rib flexible manufacturing system) that is composed of several automated equipments such as the 5-axis machining centers, the RGV (rail guided vehicles)s, the AS/RS (automated storage and retrieval system), the loading/unloading stations, and so on. Pallets play a critical role in the WFMS to maintain high system utilization and continuous work flow between 5-axis machining machines and automated material handling devices. The discrete event simulation method is used to evaluate the performance of the WFMS under various pallet mix alternatives for wing rib manufacturing processes. Four performance measures including system utilization, throughput, lead-time and work in process inventory level are investigated to determine the best pallet mix alternative. The best pallet mix identified by the simulation study is adopted in setting up and operating a real Korean aircraft parts manufacturing shop. By comparing the real WFMS's performances with those of the simulation study, we discussed the cause of performance difference observed and the necessity of developing the CPS (cyber physical system).

• Advances in concrete construction
• /
• v.10 no.6
• /
• pp.479-488
• /
• 2020

The experimental and numerical works were carried out on high performance fiber reinforced concrete (HPFRC) with w/cm ratios ranging from 0.25 to 0.40, fiber volume fraction (Vf)=0-1.5% and 10% silica fume replacement. Improvements in compressive and flexural strengths obtained for HPFRC are moderate and significant, respectively, Empirical equations developed for the compressive strength and flexural strength of HPFRC as a function of fiber volume fraction. A relation between flexural strength and compressive strength of HPFRC with R=0.78 was developed. Due to the complex mix proportions and non-linear relationship between the mix proportions and properties, models with reliable predictive capabilities are not developed and also research on HPFRC was empirical. In this paper due to the inadequacy of present method, a back propagation-neural network (BP-NN) was employed to estimate the 28-day compressive strength of HPFRC mixes. BP-NN model was built to implement the highly non-linear relationship between the mix proportions and their properties. This paper describes the data sets collected, training of ANNs and comparison of the experimental results obtained for various mixtures. On statistical analyses of collected data, a multiple linear regression (MLR) model with R2=0.78 was developed for the prediction of compressive strength of HPFRC mixes, and average absolute error (AAE) obtained is 6.5%. On validation of the data sets by NNs, the error range was within 2% of the actual values. ANN model has given the significant degree of accuracy and reliability compared to the MLR model. ANN approach can be effectively used to estimate the 28-day compressive strength of fibrous concrete mixes and is practical.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2005.05a
• /
• pp.221-224
• /
• 2005

In this paper, we propose a fast video mixing method for reducing the computational complexity in the MCU (Multipoint Control Unit) used in the video conferencing. The conventional mixing method is based on the pixeldomain transcoder, of which computational complexity is linearly increased as the number of participants is increased. Basically the method requires N decoders and one huge encoder to mix the bitstreams from the N participants. To reduce the computational complexity, we propose a hybrid mixing method based on the bitstreamdomain and pixel-domain transcoding methods. The proposed method reduces the computational complexity about 45% at the improved quality, compared with the conventional mixing method based on the pixel-domain transcoders.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.6
• /
• pp.726-731
• /
• 2004

This paper suggests a material mixing method to mix several materials in a structure. This method is based on ESO(Evolutionary Structural Optimization), which has been used to optimize topology of only one material structure. In this study, two criterions for material transformation and element removal are implemented for mixing several materials in a structure. Optimal topology for a multiple material structure can be obtained through repetitive application of the two criterions at each iteration. Two practical design examples of a short cantilever are presented to illustrate validity of the suggested material mixing method. It is found that the suggested method works very well and a multiple material structure has more stiffness than one material structure has under the same mass.