• Journal of Environmental Impact Assessment
• /
• v.9 no.1
• /
• pp.13-24
• /
• 2000

This paper presents a study of water quality model applications in environmental impact statements which were submitted during recent years in Korea. Most of the applications have reported that the development projects would have significant impacts on the water quality, especially, of streams and rivers. The water quality models, however, were hardly used as an impact prediction tool. Even in the cases where models were used, calibration and verification studies were not performed and thus the predicted results would not be reliable. These poor model applications in environmental impact assessment can be attributable to the fact that there were no available model application guidelines as well as no requirements by the review agency. In addition, the expected waste loads were improperly estimated in most cases, especially in non-point sources, and the predicted parameters were not good enough to understand water quality problems expected from the proposed plans. The effects of mitigation measures were not analyzed in most cases. Again, these can be attributed to no formal guidelines available for impact predictions until now. A brief guideline is described in this paper, including model selection, calibration and verification, impact prediction, and analysis of effects of mitigation measures. The results of this study indicate that the model application should be required to overcome the current improper predictions of environmental impacts and the guidelines should be developed in detail and provided.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.25 no.6
• /
• pp.65-75
• /
• 2022

Urban flood management(UFM) strategy ought to consider the connections and interactions between existing and new infrastructures to manage stormwater and improve the capacity to treat water. It is also important to demonstrate strategies that can be implemented to reduce the flow at flooding sources and minimize flood risk at critical locations. Although the general theory of spatial impact is popular, modeling guidelines that can provide information for implementation in real-world plans are still lacking. Under such background, this study conducted a modeling research based on an actual target site to confirm the hypothesis that it is appropriate to install green infrastructure(GI) in the source area and to take structural protection measures in the impact area, as summarized in previous studies. The results of the study proved the hypothesis, but the results were different from the hypothesis depending on which hydrological performance indicators were targeted. This study will contribute to demonstrating the effectiveness of strategies that can be implemented to reduce the flow at flooding sources and minimize the risk of flooding in critical locations in terms of spatial planning and regeneration.

• Journal of Environmental Science International
• /
• v.17 no.4
• /
• pp.413-422
• /
• 2008

This study aims to find out a state of the damages and vulnerable areas from natural disasters in the Korean peninsula using the prevention meteorological database information made by Park(2007b). Through the correlation analysis between damage elements and total property losses, we investigate the damages of public facilities, which have high correlation coefficient, and the cause of disasters and want to propose the basic information to set up the disaster prevention measures in advance. As a result, because most of the total property losses is the damages of public facilities, we can reduce the damages of natural disasters if we can predict the damages of public facilities or carry out the prevention activities in advance. The most vulnerable area for the natural disasters are Cangwon-do and Gyeongsangnam-do provinces. The vulnerable areas for the damages of public facilities by typhoon are Daegu metropolitan city, Cangwon-do, and Gyeongsangbuk-do provinces. These vulnerable areas will take place more frequently due to the climate change including Gyeongsangnam-do province so that we need to set up the disaster prevention measures and natural disaster mitigation plan. Also, we think that it has effect on reducing the damages of natural disasters to predict the damage scale and strongly perform the prevention activities in advance according to typhoon track and intensity.

• Journal of Contemporary Eastern Asia
• /
• v.18 no.2
• /
• pp.90-117
• /
• 2019

How is science advice integrated in environmental policymaking? This is an increasingly pertinent question that is being raised since the nuclear catastrophe of Fukushima, Japan, in 2011. Global re-evaluation of energy policies and climate mitigation measures include discussions on how to better integrate science advice in policymaking, and at the same time keeping science independent from political influence. This paper addressed the policy discourse of setting up a national CO2 reduction target in Japanese policymaking between 2009 and 2012. The target proposed by the former DPJ government was turned down, and Japan lacked a clear strategy for long-term climate mitigation. The analysis provides explanations from a quantitative actor-network perspective. Centrality measures from social network analysis for policy actors in an environmental policy network of Japan were calculated to identify those actors that control the discourse. Data used for analysis comes from the Global Environmental Policy Actor Network 2 (GEPON 2) survey conducted in Japan (2012-13). Science advice in Japan was kept independent from political influence and was mostly excluded from policymaking. One of the two largest discourse coalitions in the environmental policy network promoted a higher CO2 reduction target for international negotiations but favored lowering the target after a new international agreement would have been set. This may explain why Japan struggled to commit to long-term mitigation strategies. Applying social network analysis to quantitatively calculate discourse coalitions was a feasible methodology for investigating "discursive power." But limited in discussing the "practice" (e.g. meetings, telephone, or email conversations) among the actors in discourse coalitions.

• Journal of Environmental Impact Assessment
• /
• v.7 no.2
• /
• pp.71-82
• /
• 1998

This study focuses on one of the most typical energy-intensive industries, the steel industry. The two-fold purpose of the study is to develop a model to assess measures to alleviate sulfur dioxide($SO_2$) emissions from the steel industry and to propose a concrete $SO_2$ emission reduction measure from the steel industry. This study partially employed and modified AIM(Asia-Pacific Integrated Model) developed by Japan National Environmental Research Institute to develop AIM/KOREA SULFUR model for simulation. In the study, a base scenario, which is BAU(Business As Usual) scenario, and mitigation scenarios(a use of low-sulfur contain fuel, fuel conversion to cleaner energy, an induction of desulfurization systems, and energy saving) were employed. The results of the simulation are summarized below: The sulphur dioxide emission from the steel industry in 1992 was estimated to be 252,000 metric tons; however, according to BAU scenario, sulphur dioxide emission is expected to be increased to 586,000 metric tons, which is 2.3 times greater than that in 1992 by year 2020. To alleviate such increasement, simulation results under various 7scenarios proved that some degrees of reduction may be possible by an induction of desulfurization systems although there may be numerous ways to interpretate the simulation results; however, the bottom line is that it appears to be difficult to achieve the Korean Ministry of Environment's policy goal-a mitigation of sulphur dioxide concentration to 0.01ppm.

• Journal of the Korean Institute of Gas
• /
• v.14 no.4
• /
• pp.18-23
• /
• 2010

After conducting QRA(quantitative risk assessment) for the high pressure urban gas pipelines planned to be installed, RMMs(risk mitigation measures) when the societal risk is outside the acceptable region have been derived in this paper. Also risk reduction rates are calculated for each RMM. As a result of QRA, we find out that damaged distance caused by radiational heat is largely dependent upon the wind velocity and the atmospheric stability. The measure that has the highest risk reduction effect is No. 10 which includes pipeline corrosion monitoring, MOV(motor operated valve) installation and the method to protect pipeline damage caused by third-party mechanical interference, and which shows 75 % of risk reduction effect.

• Journal of Korea Water Resources Association
• /
• v.43 no.6
• /
• pp.507-516
• /
• 2010

The purpose of this study is to propose the alternative development method by means of determining the optimal project size from the economic viewpoint, improving the existing method depending on engineering aspects. To this end, this study defined the flood mitigation projects as the production activities carried out by inputs and outputs, and proposed the alternative development method on the basis of optimizing input and output combinations. This paper, as the case study of the proposed method, developed alternatives for the flood mitigation planning of Youngsan River Basin by determining the optimal project scale. As the result of determining optimal project size, the net benefit of the optimal alternative tended to be dependent on the net benefits of the large individual proposals. Due to such problem, the effect of relatively small individual proposals are underestimated and possibly be excluded from the optimal alternative, which may result in exclusion of the potential damaged regions protected by them from the flood mitigation project. Thus for the selective flood protection by region, individual proposals need to be categorized into the global measures and local measures according to the flood protection area.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.2
• /
• pp.801-810
• /
• 2013

The main purpose of this study is to reframe sustainability or sustainable development concept in the field of planning in consideration of climate change and natural hazards. The new concept is expected to provide a theoretical foundation for upcoming hazard mitigation measures addressing climate change. The first and main argument of the new concept is that environmental protection should be inclusive enough to address urban (or community) security from current natural hazards. The second is that the balance between structural and nonstructural mitigation measures is critical to cope more effectively with extreme natural hazards in the era of climate change and also with conflicts driven by three goals of sustainability--environmental protection, economic development, and social justice. The following studies, based on this new concept of sustainablity, are expected (1) to address new participation methods for the conflict resolution, (2) to explore detailed and substantive planning strategies and creative technical and institutional solutions for environmental protection, natural hazard mitigation, and conflict resolution. Two of APFM(the Associated Programme on Flood Management)'s three natural hazard risk criteria, Exposure and Vulnerability, may guide the exploration.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.63-66
• /
• 2008

The bridge deck section composed of a concrete slab resting on two I-beam girders are known to be susceptible to flutter instability and vortex shedding. Moreover, the cable stayed bridge in construction is more vulnerable to wind rather than in service when the free cantilever construction method is applied. This paper describes the effect of the dynamic wind loads on the bridge during construction and the effect of alternative temporary stabilizing measures. Therefore, a series of wind tunnel tests and numerical analysis were carried out to determine if any countermeasures were required.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.64 no.11
• /
• pp.1611-1617
• /
• 2015

This paper presents an effective approach for establishing countermeasures against voltage sags based on the concept of area of severity. In order to apply preventive measures against faults such as lightning arrester, overhead earth wires and so on, it is important to find optimal points for installing the preventive measures. The optimal points can be determined by the calculation of the area of severity(AOS) to voltage sags and the expected sag frequency per unit length of line. In this paper, an effective method to find optimal points to apply countermeasures against voltage sags is addressed with case studies.