• Journal of the Optical Society of Korea
• /
• v.20 no.1
• /
• pp.94-100
• /
• 2016

A novel optical design for high resolution, large field of view (FOV) and multispectral remote sensing is presented. An f/7.3 Korsch and two f/17.9 Cook three-mirror optical systems are integrated by sharing the primary and secondary mirrors, bias of the FOV, decentering of the apertures and reasonable structure arrangement. The aperture stop of the Korsch system is located on the primary mirror, while those of the Cook systems are on the exit pupils. High resolution image with spectral coverage from visible to near-infrared (NIR) can be acquired through the Korsch system with a focal length of 14 m, while wide-field imaging is accomplished by the two Cook systems whose focal lengths are both 13.24 m. The full FOV is 4°×0.13°, a coverage width of 34.9 km at the altitude of 500 km can then be acquired by push-broom imaging. To facilitate controlling the stray light, the intermediate images and the real exit pupils are spatially available. After optimization, a near diffraction-limited performance and a compact optical package are achieved. The sharing of the on-axis primary and secondary mirrors reduces the cost of fabrication, test, and manufacture effectively. Besides, the two tertiary mirrors of the Cook systems possess the same parameters, further cutting down the cost.

• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.208.2-208.2
• /
• 2012

The Slewing Mirror Telescope (SMT) is a key telescope of Ultra-Fast Flash Observatory (UFFO) space project to explore the first sub-minute or sub-seconds early photons from the Gamma Ray Bursts (GRBs) afterglows. The first realization of UFFO is the 20kg UFFO-Pathfinder (UFFO-P) to be launched on board the Russian Lomonosov satellite in 2013 by the Soyuz-2 rocket. Once the UFFO Burst Alert & Trigger Telescope (UBAT) detects the GRBs, Slewing mirror (SM) will rotate to bring the GRB into the SMT's field of view instead of slewing the entire spacecraft. SMT can image the UV/Optical counterpart with about 4-arcsec accuracy. However it will provide a important understanding of the GRB mechanism by measuring the sub-minute optical photons from GRBs. SMT can respond to the trigger over $35^{\circ}{\times}35^{\circ}$ wide field of view within 1 sec by using Slewing Mirror Stage (SMS). SMT has 10-cm Ritchey-Chretien telescope and $256{\times}256$ pixilated Intensified Charge-Coupled Device (ICCD) on focal plane. In this paper, we discuss the overall design of UFFO-P SMT instrument and payloads development status.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.183-188
• /
• 1997

Cut-off filters would reject all the radiation below and transmit all that above a certain wavelength or vice versa. In this paper, we study design and farbrication of dichroic mirror and broadband high reflective mirror for color separation of white laser beam source to R.G.B color beam source. In laser display system, color separation is very important. We fabricated below specific component for finite color separation of the Kr-Ar laser source. At 45$^{\circ}$ incidence s-polarized light , it is required that - H/R in blue region R>99%, H/T in green and red region T>90% - H/R in green and red region R>99%, H/T in blue region T>90% - H/R in green region R>99%, H/T in red region T>90% We composed the optical system and realize the full color image.

• Journal of Practical Engineering Education
• /
• v.10 no.1
• /
• pp.9-15
• /
• 2018

A digital signage is constructed using a speech recognition based API, and VRSM (Voice Recognition Smart Mirror) that obtains information such as weather, map, exercise information, schedule, and image by user's voice command so as to be different from other commercialized products is proposed. This course provides an effective method of engineering education through the process of being evaluated as the result of independent graduation certification system, and also it had been the opportunity to design and produce works for 3 semesters by 2 students one group in the majors. Through the comprehensive capstone design, it has experienced engineering approach and creative thinking opportunity. We have won the best academic prize by participating in the academic conferences of the institute about the interim result, and obtained the results of the prize contest in other academic conferences. The improvement in practical skills obtained through this process proved to be beneficial for self-confidence and job-seeking opportunities through actual employment.

• The Journal of the Korea Contents Association
• /
• v.4 no.4
• /
• pp.163-169
• /
• 2004

In this paper. we propose a shaded recognition method using symmetric feature. When the existing PCA is applied to shaded face images, the recognition rate is decreased. To improve the recognition rate, we use facial symmetry. If the difference of light and shade is greater than a threshold value, we make a mirror image by replacing the dark side with the bright side symmetrically Then the mirror image is compared with a query image. We compare the performance of the proposed algorithm with the existing algorithms such as PCA, PCA without three eigenfaces and histogram equalization methods. The recognition rate of our method shows $98.889\%$ with the excellent result.

• Korean Journal of Remote Sensing
• /
• v.25 no.2
• /
• pp.133-143
• /
• 2009

This paper describes differences of performance when the orbit attitude model is applied to the respective images obtained from two different types of satellite. The one is Spot that rotates its pointing mirror and the other is Kompsat-2 that rotates its whole body when they obtain imagery for target. Our research scope is limited to the orbit-attitude model only as its good performance was proved in prior investigation. Model performances between two images were compared with sensor model accuracy and 3D coordinates calculation. The results show performances of the orbit-attitude model for each image type were different. For Spot imagery, the model required attitude angle to be included as adjustment parameters. For Kompsat-2 imagery, the model required high-order parameter for adjustment. This implies that satellite sensor model may be applied differently in accordance with platform's attitude control scheme and accuracy. Understanding of this information can be a base for improvement and development of model and application for new satellite images.

• Korean Institute of Interior Design Journal
• /
• v.13 no.3
• /
• pp.43-51
• /
• 2004

1"his Study is to make research a Image and Symbol in the Gothic Architecture. Firstly, the concept of the symbol and the image effect are essentially based on the meaning that the activity of consciousness take on the constitution of the symbol. Therefore the image represent the deepest content of human nature has been imagination and reality. Secondly, the symbol concept showed in Gothic Architecture was associated with the passion of the order of middle ages. The world, the cosmos and the history had been revealed in Gothic architecture. In Gothic Image, Emile Male maintained the symbol of the Catholic Church as above mentioned. The Catholic Church was mirror of the natural, the institution, the moral and history, then this passion of the order was a christian order. Especially, E. Panofsky said that the scholastic method was shown in Gothic architecture. He assert that it was especially dialectic method used in theology. That is, he explained the transfiguration of Gothic Architecture with the process of thesis, anti-thesis, synthesis. These symbolize light, magnitude, clearness. Finally, symbolic image is important in Post-Modem architecture at present. Post-Modern architecture is associated with the public and the Pluralism. Post-Modern architecture attempt to communicate as symbolic language among the assumption for diverse aspect of culture.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.4
• /
• pp.1441-1456
• /
• 2015

The bidimensional empirical mode decomposition (BEMD) algorithm with high adaptability is more suitable to process multiple image fusion than traditional image fusion. However, the advantages of this algorithm are limited by the end effects problem, multiscale integration problem and number difference of intrinsic mode functions in multiple images decomposition. This study proposes the multiscale self-coordination BEMD algorithm to solve this problem. This algorithm outside extending the feather information with the support vector machine which has a high degree of generalization, then it also overcomes the BEMD end effects problem with conventional mirror extension methods of data processing,. The coordination of the extreme value point of the source image helps solve the problem of multiscale information fusion. Results show that the proposed method is better than the wavelet and NSCT method in retaining the characteristics of the source image information and the details of the mutation information inherited from the source image and in significantly improving the signal-to-noise ratio.

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.188-200
• /
• 1995

A design of unit magnification 2-mirror system with high resolution is presented. It is for soft X-ray(wavelength of 13 nm) projection imaging and suitable for preparation of high density semiconductor chip. In general, a holosymmetric system with unit magnification has the advantage that both coma and distortion are completely eliminated. In our holosymmetric 2-mirror system, spherical aberration is addtionally removed by using two identical paraboloidal mirror surfaces and field curvature aberration is also corrected by balancing Petzval sum and astigmatism which depends on the distance between two mirrors, so that the system is a aplanatic flat-field paraboloidal 2-mirror holosymmetric system. This 2-mirror system is small in size, and has a simple configuration with rotational symmetry about optical axis, and has also small central obscuration. Residual finite aberrations, spot diagrams, and diffraction-based MTF's are analyzed for the check of performances as soft X-ray lithography projection system. As a result, the image sizes for the resolutions of$0.25\mum$and $0.18\mum$are 4.0 mm, 2.5 mm respectively, and depths of focus for those are $2.5\mum$, $2.4\mum$respectively. This system should be useful in the fabrication of 256 Mega DRAM or 1 Giga DRAM. DRAM.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.31 no.5
• /
• pp.466-471
• /
• 2011

Optical coherence tomography(OCT) is an emerging medical diagnostic tool that draws great attention in medical and biological fields. It has a 10-100 times higher spatial resolution than that of the clinical ultrasound but lower imaging depth such as 1-2 mm. In order to image internal organs, OCT needs an endoscopic probe. In this paper, the principle of Fourier-domain optical coherence tomography with high-speed imaging capability was introduced. An OCT endoscope based on MEMS technology was developed. It was attached to the Fourier-domain OCT system to acquire three-dimensional tomographic images of gastrointestinal tract of New Zealand white rabbit. The endoscope had a two-axis scanning mirror that was driven by electrostatic force. The mirror stirred an incident light to sweep two-dimensional plane by scanning. The outer diameter of the endoscope was 6 mm and the mirror diameter was 1.2 mm. A three-dimensional image rendered by 200 two-dimensional tomographs with $200{\times}500$ pixels was displayed within 3.5 seconds. The spatial resolution of the OCT system was 8 ${\mu}m$ in air.