• 한국환경과학회지
• /
• 제7권5호
• /
• pp.647-652
• /
• 1998

This study is to find out the emission estimation in Kimhae area. For this purpose, the Kimhae statistical yearbook and data of waste facilities issued by Kimhae city and the report on energy census issued by the ministry of trade, industry and energy are used. Each item for the emission estimation is $SO_2$, CO, HC, Nox, TSP from point, line, area sources. The results were as follows; The air pollutants with the highest mont of emission from the emission sources is CO followed by Nox, $SO_2$, TSP, HC in descending order of magnitude. The emission consists of 66.15% of line, 24.65% of area and 9.20% of point sources at Kimhae.

• E2M - 전기 전자와 첨단 소재
• /
• 제11권11호
• /
• pp.37-45
• /
• 1998

In this paper, present status of super high-efficiency tandem solar cells has been reviewed and key issues for realizing super high-efficiency have also been discussed. In addition, the terretrial R&D activities of tandem cells, in the New Sunshine Program of MITI(Ministry of International Trade and Industry) and NEDO(New Energy and Industrial Technology Development Organization) in Japan are reviewed briefly. The mechanical stacked 3-junction cells of monolithically grown InGaP/GaAs 2-junction cells and InGaAs cells have reached the highest efficiency achieved in Japan of 33.3% at 1-sun AM1.5. This paper also reports high-efficiency InGaP/GaAs 2-junction solar cells with a world-record efficiency of 26.9% at AM0, 28$^{\circ}C$ and radiation damage recovery phenomena of the tandem cell performance due to minority-carrier injection under light illumination or forward bias, which causes defect annealing in InGaP top cells. Future prospects for realizing super-high efficiency and low-cost tandem solar cells are also described.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.43-44
• /
• 2021

As drone technology advances, the cases of using drones in the construction industry are increasing rapidly. Research by the Ministry of Trade, Industry and Energy, has shown that drone use in the construction sector is expected to expand the fastest, and research has been carried out continuously to utilize drones in the construction industry. In this way, we will identify drone research trends in the construction industry as a basic data that will provide direction for future research. This paper collected papers for 10 years from 2011 to 2020 and keyword analysis through Gephi 0.9.2. This paper was classified by the study details of the paper with the upper keywords by year, through which it analyzed the changes in the direction of the study by field. The data in this paper is designed to contribute to the development of balanced drone utilization research, despite the limitations of 10-year statistics.

• 한국해양바이오학회지
• /
• 제3권1호
• /
• pp.38-41
• /
• 2008

Fish is a major source of protein for the Senegalese population. Fishing plays a dominant role in the Government's policy towards generating employment. It currently generates about 100,000 direct jobs (fishermen) for nationals, of which more than 90% are in small-scale fishing. The fishing industry also contributes to Government revenue through different agreements. In addition to associated dues, fishing agreements imply a series of economic, trade and technical counterparts. Under the latest fishing agreement concluded by Senegal and the European Union (1997-2001), direct financial compensation amounts to about CFAF 32 billion. Despite its economic and social importance, the sector has to face serious disequilibria both in resource exploitation and market supply: the coastal demersal (deep lying fish) stocks with high market value (mostly exported) are fully and even over-exploited, with a serious risk of local market supply shortages looming ahead as the fishing effort shifts from locally consumed species to export-oriented ones.

• 융복합기술연구소 논문집
• /
• 제5권1호
• /
• pp.33-36
• /
• 2015

In recent years, developed and developing country such as U.S., Japan, and China push forward to enhance their manufacturing industry through national policies such as advanced manufacturing(U.S.), Industrie 4.0 (Germany), and Made in China 2025. Also, in Korea, Ministry of Trade, Industry, and Energy(MOTIE) claimed Manufacturing3.0 for encouraging domestic manufacturing industry. Manufacturing industry plays an important role in encouraging economy and employment. In this paper, we survey, analyze and summarize the current national policy for enhancing manufacturing industry.

• 한국전산유체공학회지
• /
• 제8권4호
• /
• pp.26-33
• /
• 2003

Smart UAV Development Program, one of the 21c Frontier R&D Program sponsored by MOST(Ministry of Science and Technology), was launched in 2002 As an air vehicle for the Smart UAV, CRW(Canard Rotor/wing) concept was one of the candidates compared in trade-off study. The CRW concept has not only been proven completely but its aerodynamic characteristics not known in detail yet. Two calculation methods were adopted in this study to obtain aerodynamic data for the CRW First method was the superpose DATCOM method which is capable of three lifting sufaces, and second one is the full Navier-Stokes computation around CRW configuration using overset grid method. Basic aerodynamic characteristics of the CRW configuration was analyzed and the minimum drag level with lift to drag ratio is presented. The peculiar flow characteristics around rotor/wing and hub were also examined and considered in the configuration design.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제5권2호
• /
• pp.428-439
• /
• 2011

The main challenge in building efficient broadcast systems is to encrypt messages with short ciphertexts. In this paper, we present a new construction based on the identity. Our construction contains the desirable features, such as constant size ciphertexts and private keys, short public keys and not fixing the total number of possible users in the setup. In addition, the proposed scheme achieves the full security which is stronger than the selective-identity security. Furthermore we show that the proof of security does not rely on the random oracles. To the best our knowledge, it is the first efficient scheme that is full security and achieves constant size ciphertexts and private keys which solve the trade-off between the ciphertext size and the private key size.

• 한국지열·수열에너지학회논문집
• /
• 제15권4호
• /
• pp.1-7
• /
• 2019

Cooling using the Han River has recently been spreading. The Ministry of Trade, Industry and Energy submitted a revised enforcement ordinance to include river water in renewable energy. Therefore, it is necessary to analyze the water temperature characteristics of Han River. Especially, it is necessary to investigate the effect on hot summer. In this study, we analyzed the water temperature of the last 11 years. It is intended to utilize the Han River for building cooling in the future.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전력기술부문
• /
• pp.140-143
• /
• 2001

As global trade system transferred GATT into WTO, the harmonization of technological standards, certification, construction, testing is the trend of world. This drift is based on WTO / TBT agreement coming. In effect after 12th, April, 1979. For Korea, the distribution system has a strong resemblance to American system so that engineers are confused in adopting standards. IEC60364 and NEC are in part similar but unconvertible because IEC 60364 originated from Europe while NEC originated from USA. This thesis deals with the fundamental elements of electrical safety system with comparing IEC 60364 with NEC. It serves as a guide how to apply standards when engineers select electrical installations.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2003년도 추계 학술대회논문집
• /
• pp.106-113
• /
• 2003

Smart UAV Development Program, one of the 21c Frontier R&D Program sponsored by MOST(Ministry of Science and Technology), was launched in 2002. As an air vehicle for the Smart UAV, CRW(Canard Rotor/Wing) concept was one of the candidates compared in trade-off study. The CRW concept has not only been proven completely but its aerodynamic characteristics not known in detail yet. Two calculation methods were adopted in this study to obtain aerodynamic data for the CRW. First method was the superpose DATCOM method which is capable of three lifting surfaces, and second one is the full Navier-Stokes computation around CRW configuration using overset grid method. Basic aerodynamic characteristics of the CRW configuration was analyzed and the minimum drag level with lift to drag ratio is presented. The peculiar flow characteristics around rotor/wing and hub were also examined and considered in the configuration design.