• Advances in concrete construction
• /
• v.13 no.1
• /
• pp.83-99
• /
• 2022

The two, NBD and SCB tests using gypsum circular discs each containing a single notch have been experimentally accomplished in a rock mechanics laboratory. These specimens have also been numerically modelled by a two-dimensional particle flow which is based on Discrete Element Method (DEM). Each testing specimen had a thickness of 5 cm with 10 cm in diameter. The specimens' lengths varied as 2, 3, and 4 cm; and the specimens' notch angles varied as 0°, 45° and 90°. Similar semi-circular gypsum specimens were also prepared each contained one edge notch with angles 0° or 45°. The uniaxial testing machine was used to perform the experimental tests for both NBD and SCB gypsum specimens. At the same time, the numerical simulation of these tests were performed by PFC2D. The experimental results showed that the failure mechanism of rocks is mainly affected by the orientations of joints with respect to the loading directions. The failure mechanism and fracturing patterns of the gypsum specimens are directly related to the final failure loading. It has been shown that the number of induced tensile cracks showing the specimens' tensile behavior, and increases by decreasing the length and angle of joints. It should be noted that the fracture toughness of rocks' specimens obtained by NBD tests was higher than that of the SCB tests. The fracture toughness of rocks usually increases with the increasing of joints' angles but increasing the joints' lengths do not change the fracture toughness. The numerical solutions and the experimental results for both NDB and SCB tests give nearly similar fracture patterns during the loading process.

• Structural Engineering and Mechanics
• /
• v.81 no.1
• /
• pp.81-91
• /
• 2022

The effects of interaction between concrete-gypsum interface and edge crack on the failure behavior of the specimens in senicircular bend (SCB) test were studied in the laboratory and also simulated numerically using the discrete element method. Some quarter circular specimens of gypsum and concrete with 5 cm radii and hieghts were separately prepared. Then the semicircular testing specimens were made by attaching one gypsum and one concrete sample to one another using a special glue and one edge crack is produced (in the interface) by do not using the glue in that part of the interface. The tensile strengths of concrete and gypsum samples were separately measured as 2.2 MPa and 1.3 MPa, respectively. during all testing performances a constant loading rate of 0.005 mm/s were stablished. The proposed testing method showed that the mechanism of failure and fracture in the brittle materials were mostly governed by the dimensions and number of discontinuities. The fracture toughnesses of the SCB samples were related to the fracture patterns during the failure processes of these specimens. The tensile behaviour of edge notch was related to the number of induced tensile cracks which were increased by decreasing the joint length. The fracture toughness of samples was constant by increasing the joint length. The failure process and fracture pattern in the notched semi-circular bending specimens were similar for both methods used in this study (i.e., the laboratory tests and the simulation procedure using the particle flow code (PFC2D)).

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.59-59
• /
• 2022

세계적으로 지구온난화를 동반한 기후변화로 인해 자연재난이 빈번하게 발생하고 있다. 재해의 발생 유형 중 집중호우와 태풍으로 인한 수문학적 재해가 대부분을 차지하고 있다. 이와 같이 홍수로 인해 발생하는 피해는 강우의 특성과 지역적 특성에 따라 피해의 규모와 범위가 달라진다. 따라서 이러한 이질적인 홍수피해로부터 재산과 인명을 보호하기 위해서는 위해성(Hazard), 노출성(Exposure), 취약성(Vulnerability)을 고려하여 지역 특성에 맞는 홍수방어계획을 수립해야한다. 본 연구에서는 전국 228개 행정구역을 대상으로 과거에 실제로 발생하였던 홍수피해 사례 조사를 통해 지역별 홍수피해 특성을 파악하여 지역 특성을 고려한 홍수피해 강우기준을 제시하고자 하였다. 이를 위해서 재해연보 보고서에 기재되어 있는 과거 홍수피해 기간과 홍수피해액을 수집하였고, 홍수피해 기간동안의 강우량과 뉴스 기사를 수집하여 뉴스 기사에서 언급되었던 홍수피해 현상 정보를 수집하였다. 수집된 홍수피해 정보를 통해 지역별 노출성과 취약성이 반영된 현상기반 강우등급을 제시하였으며, 이와 함께 지역별 강우특성을 나타내며 위해성을 내포하고 있는 확률강우량과의 합성을 통해 위해성, 노출성, 취약성을 고려한 지역별 홍수피해 강우기준을 제시하였다. 대부분 홍수피해에 관한 정보를 재해연보 보고서를 활용하여 수집하지만 홍수피해 현상에 대한 정보를 포함하고 있지 않기 때문에 지역별로 홍수피해로부터 발생하는 홍수피해 유형에 대해 파악하기에는 한계가 있다. 따라서 본 연구에서는 과거 홍수피해가 발생했던 기간에 대해 뉴스 기사를 수집하여 홍수피해 현상 정보를 수집하였고, 수집된 홍수피해 현상 정보를 텍스트 마이닝(Text Mining) 기법을 적용하여 홍수피해 현상 키워드 빈도분석을 통해 어떠한 홍수피해 유형에 취약한지 파악하였다.

• Environmental Engineering Research
• /
• v.15 no.2
• /
• pp.85-91
• /
• 2010

Romania aims to adopt and implement the European Union's legislation, also including that for the field of water management. Like other countries, groundwater in Romania is locally polluted from point sources, such as leaking landfills, as well as from diffuse pollution sources, include fertilizers, pesticides and leakages from sewers, in urbanized areas. Diffuse pollution can also occur indirectly, by over-exploitation of groundwater wells, resulting in salt water intrusion, as well as from mining and exploitation of mineral aggregates. Romania has quite an intensive monitoring scheme to measure groundwater quality in phreatic and confined aquifers. The purpose of the work resumed in this paper was to derive natural background levels (NBL) for groundwater in order to distinguish the natural elevated concentrations of some substances (natural phenomena) from point and diffuse pollution (anthropogenic phenomena). Based on these NBLs, threshold values (TV) for groundwater will be set according to the requirements of the European Water Framework Directive and the related Groundwater Directive. This paper describes the results of a study for the derivation of NBL and TV in a pilot Groundwater Body. Also, the process and draft results for extrapolating this work for all Romanian groundwater bodies is explained, as well as points for future consideration with respect to monitoring and management.

• Journal of Internet Computing and Services
• /
• v.11 no.4
• /
• pp.51-58
• /
• 2010

In this paper, we introduce various attempts to transmit sensor data efficiently for design of a water quality monitoring system under the USN environment. The representative methods are the sensor management on a sensor node and the clustering on a sink node. The sensor management includes controls of sensing intervals, data accumulations, and data transmissions. And the clustering is one of efficient data compression methods using data mining technology. From the experimental results we confirmed that the proposed transmission method using the sensor management and the clustering outperformed common transmission method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.189-189
• /
• 2023

최근 이상 기후변화로 인해 환경과 생태계 등 다양한 분야에서 문제들이 발생하고 있다. 특히 하천에서는 유량 부족, 부영양화, 탁수 등 수질 악화 현상이 대두되고 있어 체계적인 하천 수질관리의 필요성이 높아지고 있다. 국내에서는 수질오염총량제도를 통해 BOD, T-P 항목을 대상물질로 수계의 수질을 관리하고 있지만, 오염원이 다양해짐에 따라 다항목의 수질인자를 활용한 평가방안이 필요한 실정이다. 최근 효율적인 하천의 수질관리를 위해 다양한 항목을 고려한 종합적인 수질 평가 방법이 도입되고 있다. 국내외에서는 하천의 종합적인 수질을 평가하고자 CCME WQI, RTWQI, NSFWQI 등의 수질지수(Water Quality Index, WQI)를 개발하여 하천의 복잡한 수질 정보를 점수 및 등급으로 산정하여 하천의 수질을 평가하고 있으나 하천 유역 특성에 따라 주요 영향 인자가 상이하므로 유역 특성에 따른 맞춤형 수질관리가 필요하다. 본 연구에서는 유역 특성별 수질을 평가하기 위해 의사결정나무 기법을 적용한 수질지수를 산정하고자 한다. 군집분석을 통해 비슷한 특징을 가지는 유역을 분류하고, 군집별 특성 및 관계 분석을 통해 유역별 주요 수질인자 도출 및 가중치를 산정하여 군집별 적합한 수질지수를 산정하고자 한다. 이러한 연구를 통해 유역 특성별 수질 관리를 위한 기초 자료로 활용될 수 있을 것으로 사료된다.

• Journal of the Mineralogical Society of Korea
• /
• v.19 no.3 s.49
• /
• pp.171-187
• /
• 2006

The status of heavy metal contamination was investigated using chemical analyses of stream waters and sediments obtained from Samsanjeil and Sambong Cu mining area in Goseong-gun, Gyeongsangnam-do. In addition, the degree and the environmental risk of heavy metal contamination in stream sediments was assessed through pollution index (Pl) and danger index (DI) based on total digestion by aqua regia and fractionation of heavy metal contaminants by sequential extraction, respectively. Not only the degree of heavy metal contamination was significantly higher in Samsanjeil area than in Sambong area, but its environmental risk was also revealed much more serious in Samsanjeil area than in Sambong area. The differences in status and level of contamination and environmental risk between both two mining areas may be attributed to existence of contamination source and geology. Acid mine drainage is continuously discharged and flows into the stream in Samsanjeil mining area, and it makes the heavy metal contamination in the stream more deteriorated than in Sambong mining area in which acid mine drainage is not produced. In addition, the geology of Samsanjeil mining area is mainly comprised of andesitic rocks including a small amount of calcite and having lower pH buffering capacity fer acid mine drainage, and it is likely that the heavy metal contamination cannot be naturally attenuated in streams. On the contrary, the main geology of Sambong mining area consists of pyroclastic sedimentary Goseong formation containing a high content of carbonates, particularly calcite, and it seems that these carbonates of high pH buffering capacity prevent the heavy metal contamination from proceeding downstream in stream within that area.

• Journal of Korea Water Resources Association
• /
• v.51 no.11
• /
• pp.999-1009
• /
• 2018

A Model Tree technique of data mining was applied to derive optimal equations for sediment discharge assessment based on the measured sediment data and then to evaluate stable channel design for Naesung Stream. The sediment discharge formula as a function of channel width, velocity, depth, slope and median grain diameter which was developed by a Model Tree technique with sediment discharge data measured in Korean River had a high goodness-of-fit between measured and calculated results. In case of the sediment discharge formula as a function of channel width, velocity, depth and median grain diameter which was developed by a Model Tree technique with sediment discharge data only measured in Naesung Stream represented the highest goodness-of-fit. Two types of sediment discharge formulas were applied to evaluate stable channel analysis for Yonghyeol Station of Naesung Stream. As a result, bed erosion was expected in the study section compared to the current section. It was also presented that the be slope might be changed to be a milder slope than the current slope to reach equilibrium condition in the long term.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.12 no.2
• /
• pp.96-100
• /
• 2002

This study is aimed at prevention and countermeasurements of the mine wastewater pollution caused by a mineralized area using heavy metals. Objective of this study is selected to a high positive ion methathesis capacity of the environmental integrity character materials, as well as applied to the mine wastewater treatments. Also, the environmental integrity character materials is selected Kaolin. Silica, Zeolite, Fly ash. Thus, this environmental integrity character matters will be proved in the reduced heavy metals level and fine water quality of effluent.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1022-1026
• /
• 2009

우리나라에서는 1980년대 초반부터 비점오염원 원단위를 산정하기 시작하였으나 모두 단일강우 또는 제한된 수의 실측자료만을 이용하였다. 각 토지이용에 따른 비점오염의 유출특성을 충분하게 반영하지 못하였기 때문에 강우량의 변화가 큰 지역의 경우, 강우 특성에 따라 특정 기간에 과도하게 오염부하가 산정될 수 있다. 최근 수질오염의 특징은 과거의 대량 발생원인 점오염에 의한 수질오염에서 도시 강우 유출수나 농경지 등으로부터 대량의 비점오염에 의한 수질오염으로 변화하고 있다. 그러나 비점오염은 점오염과 같이 일정한 출구를 통해 유출되지 않으므로 집중처리에 의한 조절 방법의 적용이 곤란한 형편이다. 본 연구에서는 광산(저탄장) 지역의 모니터링을 실시하여 계절별 비점오염부하 유출특성에 대하여 조사하였고, 오염부하와 EMC 농도를 산정하여 분석하였다. 본 연구는 장기적인 모니터링 과제로 향후 지속적인 모니터링을 실시하여 수질분석과 유량을 측정한다면 광산(저탄장) 지역의 비점오염부하 산정 시 유용한 자료로 활용될 것으로 판단된다.