• Geomechanics and Engineering
• /
• 제22권5호
• /
• pp.449-460
• /
• 2020

The double-lane arrangement model is frequently used in underground coal mines because it is beneficial to improve the mining efficiency of the working face. When the double-lane arrangement is used, the service time of the reserved roadway increases by twice, which causes several difficulties for the maintenance of the roadway. Given the severe non-uniform deformation of the reserved roadway in the Buertai Coal Mine, the stress distribution law in the mining area, the failure characteristics of roadway and the control effect of support resistance (SR) were systematically studied through on-site monitoring, FLAC 3D numerical simulation, mechanical model analysis. The research shows that the deformation and failure of the reserved roadway mainly manifested as asymmetrical roof sag and floor heave in the region behind the working face, and the roof dripping phenomenon occurred in the severe roof sag area. After the coal is mined out, the stress adjustment around goaf will happen to some extent. For example, the magnitude, direction, and confining pressure ratio of the principal stress at different positions will change. Under the influence of high-stress rotation, the plastic zone of the weak surrounding rock is expanded asymmetrically, which finally leads to the asymmetric failure of roadway. The existing roadway support has a limited effect on the control of the stress field and plastic zone, i.e., the anchor cable reinforcement cannot fully control the roadway deformation under given conditions. Based on obtained results, using roadway grouting and advanced hydraulic support during the secondary mining of the panel 22205 is proposed to ensure roadway safety. This study provides a reference for the stability control of roadway with similar geological conditions.

• East Asian Economic Review
• /
• 제27권4호
• /
• pp.303-325
• /
• 2023

This paper examines how APEC has transformed itself into an international forum for the vision of regional integration. It aims to quantify the documentation produced by the international organization and provide quantifiable evidence that aligns with prior knowledge rather than relying solely on intuition. For this purpose, I use various text mining techniques to extract multi-dimensional features from the text of APEC Leaders' Declarations from 1993 to 2023. In terms of interest and expectations for APEC as a forum, it is found that members have experienced two major peaks and troughs over the last three decades. It is found that the change point coincides with the Asian financial crisis of 1997 and the tensions between the United States and China since 2017. To explore more various aspects of economic integration in the Asia-Pacific region, this study also considers how consistently APEC has been an international forum for addressing issues, which members are active, and how members have clustered based on their views of APEC.

• Journal of Power Electronics
• /
• 제18권5호
• /
• pp.1555-1566
• /
• 2018

Proportional capacitor-current-feedback active damping (AD) is a common damping method for the resonance of LCL-type grid-connected inverters. Proportional capacitor-current-feedback AD behaves as a virtual resistor in parallel with the capacitor. However, the existence of delay in the actual control system causes impedance in the virtual resistor. Impedance is manifested as negative resistance when the resonance frequency exceeds one-sixth of the sampling frequency ($f_s/6$). As a result, the damping effect disappears. To extend the system damping region, this study proposes a virtual resistor-inductor-capacitor (RLC) AD method. The method is implemented by feeding the filter capacitor current passing through a band-pass filter, which functions as a virtual RLC in parallel with the filter capacitor to achieve positive resistance in a wide resonance frequency range. A combination of Nyquist theory and system close-loop pole-zero diagrams is used for damping parameter design to obtain optimal damping parameters. An experiment is performed with a 10 kW grid-connected inverter. The effectiveness of the proposed AD method and the system's robustness against grid impedance variation are demonstrated.

• Geomechanics and Engineering
• /
• 제12권4호
• /
• pp.657-673
• /
• 2017

Preventing water seepage and inrush into mines where close multiple-seam longwall mining is practiced is a challenging issue in the coal-rich Ordos region, China. To better protect surface (or ground) water and safely extract coal from seams beneath an aquifer, it is necessary to determine the height of the mining-induced fractured zone in the overburden strata. In situ investigations were carried out in panels 20107 (seam No. $2-2^{upper}$) and 20307 (seam No. $2-2^{middle}$) in the Gaojialiang colliery, Shendong Coalfield, China. Longwall mining-induced strata movement and overburden failure were monitored in boreholes using digital panoramic imaging and a deep hole multi-position extensometer. Our results indicate that after mining of the 20107 working face, the overburden of the failure zone can be divided into seven rock groups. The first group lies above the immediate roof (12.9 m above the top of the coal seam), and falls into the gob after the mining. The strata of the second group to the fifth group form the fractured zone (12.9-102.04 m above the coal seam) and the continuous deformation zone extends from the fifth group to the ground surface. After mining Panel 20307, a gap forms between the fifth rock group and the continuous deformation zone, widening rapidly. Then, the lower portion of the continuous deformation zone cracks and collapses into the fractured zone, extending the height of the failure zone to 87.1 m. Based on field data, a statistical formula for predicting the maximum height of overburden failure induced by close multiple seam mining is presented.

• 한국환경과학회지
• /
• 제15권3호
• /
• pp.279-286
• /
• 2006

Electrokinetic technique was considered in removing arsenic from the abandoned mining tails. In order to estimate the removal characteristics of arsenic, the sequential extraction analysis and desorption experiment were carried out prior to the application of electrokientic process. The result of sequential extraction analysis indicated that the water soluble and exchangeable fraction, easily leachable to ground water, were very low as much as about 2.5% and the fraction except residual (38.3%), possibly extractable under very acidic or alkalic environment, was about 59%. In the result of desorption test using four different kinds of electrolytes, the mixture of citric acid and sodium dodecyl sulfate (SDS) showed the highest desorption efficiency as much as 77.3%. The removal efficiencies of arsenic from mining tailings by electrokinetic process under the different electrolyte environments were slightly low and resulted in the following order: citric acid + SDS (18.6%) > 0.1 $NHNO_3$ (8.1%) > HAc (7.4%) > Distilled water(6.6%). Also, arsenic in soil matrix was moved favorably in the direction of anodic rather than cathodic region, which is opposite trend with cationic metal ions generally existing in soil, because anionic form of arsenic is dominated in acidic soil caused by the movement of acid front form anode.

• Journal of Power Electronics
• /
• 제19권4호
• /
• pp.1034-1044
• /
• 2019

In medium-voltage and high-voltage high-power converters, the switching devices need to operate at a low switching frequency to reduce power loss and increase the power capacity. This increases the delay of the signal sampling and PWM. It also makes the cross-couplings of the d-q current components more severe. In addition, the LCL filter has three cross-coupling loops and is prone to resonance. In order to solve these problems, this paper establishes a complex vector model of an LCL type grid-connected converter. Based on this model, two multiple decoupling current control strategies with passive damping / notch damping are proposed for the LCL type grid-connected converter. The proposed strategies can effectively eliminate the cross-couplings of the converter, achieve independent control of the d-q current components, expand the stable region and suppress the resonance of the LCL filter. Simulation and experimental results verify the correctness of the theoretical analysis and the feasibility of the proposed strategies.

• Journal of the Korean Data and Information Science Society
• /
• 제23권5호
• /
• pp.983-992
• /
• 2012

사회지표조사는 주민들이 생각하는 사회 상태를 총체적으로 파악할 수 있는 조사로서 다양한 시책 개발에 있어 지역의 여론을 반영할 수 있는 장점이 있다. 사회지표조사는 사회 변화를 알 수 있는 중요한 척도라고 할 수 있으며, 많은 지자체 (서울시, 인천시, 부산시, 울산시, 경상남도 등)에서 많은 예산과 시간을 들여 조사를 실시하고 있다. 그러나 조사에 대한 분석 결과가 기초통계분석 위주로 되어 있어 실제 사회지표조사 자료를 제대로 활용하고 있지 못하고 있는 실정이므로 데이터마이닝 등의 다양한 방법의 적용이 필요하다. 이에 본 논문에서는 사회지표조사의 효율적인 분석을 위하여 새로운 데이터마이닝 방법론을 제시하고자 한다. 본 논문에서는 매개연관성규칙, k-평균 군집분석, 의사결정나무를 순차적으로 적용하는 3단계 복합 데이터마이닝의 적용 방법을 제안하며, 이를 2010년에 조사된 경상남도 사회지표조사 자료에 적용하고자 한다.

• 농촌계획
• /
• 제27권3호
• /
• pp.103-116
• /
• 2021

In this study, the characteristics of rural tourism image perceived by urban residents were analyzed through text analysis of blog data. In order to examine the images related to rural tourism, blog data written with the keyword "Gochang-gun travel" was used. LDA topic analysis, one of the text mining techniques, was used for the analysis. In the tourism image of Gochang-gun, 9 topics were derived, and 112 major places appeared. This was divided into 3 main activities and 5 object spaces through the review of keywords and the original text of blog data. As a result of the analysis, the traditional main resources of the region, Seonun mountain, Seonun temple, and Gochang-eup fortress, formed topic. On the other hand, world heritage such as dolmen and Ungok wetland did not appear as topic. In particular, the farms operated by the private sector form individual topics, and the theme farm can be seen as an important resource for tourism in Gochang-gun. Also, through the distribution of place keywords, it was possible to understand the characteristics of travel by region and the usage behavior of visitors. In the case of Gochang-gun, there was a phenomenon in which visitors were biased by region. This seems to be the result of Gochang-gun seeking to vitalize local tourism focusing on natural, ecological, and scenic resources. It is necessary to establish a plan for balanced regional development and develop other types of tourism resources. This study is different in that it identified the types and characteristics of rural tourism images in the region perceived by visitors, and the status of tourism at the regional level.

• Geomechanics and Engineering
• /
• 제14권5호
• /
• pp.459-466
• /
• 2018

By conducting uniaxial loading cycle tests on the coal rock with outburst proneness, the dilatation characteristics at different loading rates were investigated. Under uniaxial loading and unloading, the lateral deformation of coal rock increased obviously before failure, leading to coal dilatation. Moreover, the post-unloading recovery of the lateral deformation was rather small, suggesting the onset of an accelerated failure. As the loading rate increased further, the ratio of the stress at the dilatation critical point to peak-intensity increased gradually, and the pre-peak volumetric deformation decreased with more severe post-peak damage. Based on the laboratory test results, the lateral deformation of the coals at different depths in the #1302 isolated coal pillars, Yangcheng Coal Mine, was monitored using wall rock displacement meter. The field monitoring result indicates that the coal lateral displacement went through various distinct stages: the lateral displacement of the coals at the depth of 2-6 m went through an "initial increase-stabilize-step up-plateau" series. When the coal wall of the working face was 24-18 m away from the measuring point, the coals in this region entered the accelerated failure stage; as the working face continued advancing, the lateral displacement of the coals at the depth over 6 m increased steadily, i.e., the coals in this region were in the stable failure stage.

• Geomechanics and Engineering
• /
• 제14권6호
• /
• pp.581-588
• /
• 2018

In order to explore the comprehensive evaluation means of the extent of hydraulic fracturing region in coal seams, we analyzed the feasibility of detecting the response of coal rock direct current (DC) apparent resistivity to hydraulic-fracturing using Archie's theory, and conducted experimental researches on the response of DC resistivity in the hydraulic fracturing process using small-scale coal rock samples. The results show that porosity and water saturation are the two factors affecting the apparent resistivity of coal rock while hydraulic fracturing. Water has a dominant effect on the apparent resistivity of coal rock samples. The apparent resistivity in the area where water flows through is reduced more than 50%, which can be considered as a core affect region of hydraulic fracturing. Stress indirectly impacts the apparent resistivity by changing porosity. Before hydraulic fracturing, the greater axial load applied, the more serious the rupture in the samples, resulting in the greater apparent resistivity. Apparent resistivity testing is a potential regional method to evaluate the influence range of hydraulic fracturing in coal seams.