• 한국작물학회지
• /
• 제45권1호
• /
• pp.59-70
• /
• 2000

In nature, plant diseases, insects and parasites (hereafter called as "pest") must be co-survived. The most common expression of co-survival of a host crop to the pest can be tolerance. With tolerance, chemical uses can be minimized and it protects environment and sustains host productivity and the minimum pest survival. Tolerance can be applicable in all living organisms including crop plants, lifestocks and even human beings. Tolerant system controls pest about 90 to 95% (this pest control system often be called as horizontal or partial resistance), while the use of chemicals or selection of high resistance controls pest 100% (the most expression of this control system is vertical resistance or true resistance). Controlling or eliminating the pests by either chemicals or vertical resistance create new problems in nature and destroy the co-survial balance of pest and host. Controlling pests through tolerance can only permit co-survive of pests and hosts. Tolerance is durable and environmentally-friend. Crop cultivars based on tolerance system are different from those developed by genetically modified organism (GMO) system. The former stabilizes genetic balance of a pest and a host crop in nature while the latter destabilizes the genetic balance due to 100% control. For three decades, the author has implemented the tolerance system in breeding maize cultivars against various pests in both tropical and temperate environments. Parasitic weed Striga species known as the greatest biological problem in agriculture has even been controlled through this system. The final effect of the tolerance can be an integrated genetic pest management (IGPM) without any chemical uses and it makes co-survival of pests in nature.in nature.

• Journal of Veterinary Science
• /
• 제22권2호
• /
• pp.17.1-17.13
• /
• 2021

Background: Klebsiella spp. is an important conditional pathogen in humans and animals. However, due to the indiscriminate use of antibiotics, the incidence of antimicrobial resistance has increased. Objectives: The purpose of this study was to investigate antimicrobial resistance in strains of Klebsiella strains and the phylogenetic relatedness of extended-spectrum cephalosporin (ESC)-resistance among Klebsiella strains isolated from clinically ill companion animals. Methods: A total of 336 clinical specimens were collected from animal hospitals. Identification of Klebsiella species, determination of minimum inhibitory concentrations, detection of ESC resistance genes, polymerase chain reaction-based replicon typing of plasmids by conjugation, and multilocus sequence typing were performed. Results: Forty-three Klebsiella strains were isolated and, subsequently, 28 were identified as K. pneumoniae, 11 as K. oxytoca, and 4 as K. aerogenes. Eleven strains were isolated from feces, followed by 10 from ear, 7 from the nasal cavity, 6 from urine, 5 from genitals, and 4 from skin. Klebsiella isolates showed more than 40% resistance to penicillin, cephalosporin, fluoroquinolone, and aminoglycoside. ESCresistance genes, CTX-M groups (CTX-M-3, CTX-M-15, and CTX-M-65), and AmpC (CMY-2 and DHA-1) were most common in the K. pneumoniae strains. Some K. pneumoniae carrying CTX-M or AmpC were transferred via IncFII plasmids. Two sequence types, ST709 and ST307, from K. pneumoniae were most common. Conclusions: In conclusion, this is the first report on the prevalence, ESCresistance genotypes, and sequence types of Klebsiella strains isolated from clinically ill companion animals. The combination of infectious diseases and antimicrobial resistance by Klebsiella in companion animals suggest that, in clinical veterinary, antibiotic selection should be made carefully and in conjunction with the disease diagnosis.

• 한국수산과학회지
• /
• 제56권2호
• /
• pp.188-195
• /
• 2023

Antimicrobial resistance patterns of Escherichia coli strains isolated from 30 seawater samples and 30 Korean rockfish Sebastes schlegelii collected from fish farms off the South Coast of Korea in 2018-2019, were investigated. The isolated E. coli (154 strains) showed the highest antimicrobial resistance to tetracycline (44.8%) followed by chloramphenicol (38.3%), streptomycin (37.6%), and trimethoprim/sulfamethoxazole (35.7%). The antimicrobial resistance rate was higher in E. coli strains isolated from Korean rockfish than those from seawater. Multiple antibiotic resistance (MAR) against at least three antimicrobials (MAR index: ≥0.2) was observed in 35.6% and 79.2% of the seawater and Korean rockfish isolates, respectively. In conclusion, continuous monitoring is required to identify changes in antimicrobial resistance and their correlations in the aquatic environment and products.

• 한국유기농업학회지
• /
• 제31권4호
• /
• pp.381-394
• /
• 2023

This study was conducted to monitor the antibiotics resistance of human-harmful bacteria isolated in the agricultural environment for hot peppers (Capsicum annuum) and tomato (Lycopersicon esculentum). As a result, we isolated 120 bacterial species (34 on fruits, 48 in soil, 21 in water, and 17 in manure), identified them with the 16S rRNA sequence, analyzed minimum inhibitory concentration (MIC) for 26 antibiotics using Sensititre ARIS Hi-Q system and then evaluated whether each bacterial genus acquired resistance for the tested antibiotics or not, according to the CLSI criteria. From difference in MIC between eco-friendly (EFM) and practical (PFM) cultivation farms, Klebsiella spp. isolated from EFM was resistant to ampicillin (AMP) and nalidixic acid (NAL), and that isolated from PFM was resistant to streptomycin (STR) and tetracycline (TET). Enterobacter spp. isolated from EFM was resistant to AMP and azithromycin (AZI), and that isolated from PFM was resistant to AMP, AZI, and STR. Meanwhile, Pseudomonas spp. isolated from EFM and PFM were all resistant to AMP, AZI, cefotaxime (FOT), cefoxitin (FOX), ceftriaxone (AXO), CHL, NAL, and STR. Staphylococcus spp. isolated from EFM and PFM were resistant to gentamycin (GEN), STR, and kanamycin (KAN), and in particular, that from EFM showed resistance for erythromycin (ERY). In conclusion, our study suggested that EFM lead STR antibiotics resistance for human-harmful bacteria to decrease, because only the bacteria isolated from hot pepper and tomato crop with PFM have showed resistance against STR antibiotics, regardless of bacterial genus.

• 한국정밀공학회지
• /
• 제34권3호
• /
• pp.185-189
• /
• 2017

Recently, titanium alloys have been widely used in aerospace, biomedical engineering, and military industries due to their high strength to weight ratio and corrosion resistance. However, it is well known that titanium alloys are difficult-to-cut materials because of a poor machinability characteristic caused by low thermal conductivity, chemical reactivity with all tool materials at high temperature, and high hardness. To improve the machinability of titanium alloys, cryogenic cooling with LN2 (Liquid Nitrogen) and nanofluid MQL (Minimum Quantity Lubrication) technologies have been studied while turning a Ti-6Al-4V alloy. For the analysis of turning process characteristics, the cutting force, the coefficient of friction, and the surface roughness are measured and analyzed according to varying lubrication and cooling conditions. The experimental results show that combined cryogenic cooling and nanofluid MQL significantly reduces the cutting forces, coefficients of friction and surface roughness when compared to wet condition during the turning process of Ti-6Al-4V.

• Geomechanics and Engineering
• /
• 제7권5호
• /
• pp.525-537
• /
• 2014

The typical design of ground improvement with prefabricated vertical drains (PVD) and surcharge preloading involves a series of deterministic analyses using averaged or mean soil properties for the various combination of the PVD spacing and surcharge preloading height that would meet the criteria for minimum consolidation time and required degree of consolidation. The optimum design combination is then selected in which the total cost of ground improvement is a minimum. Considering the variability and uncertainties of the soil consolidation parameters, as well as considering the effects of soil disturbance (smear zone) and drain resistance in the analysis, this study presents a stochastic cost optimization of ground improvement with PVD and surcharge preloading. Direct Monte Carlo (MC) simulation and importance sampling (IS) technique is used in the stochastic analysis by limiting the sampled random soil parameters within the range from a minimum to maximum value while considering their statistical distribution. The method has been verified in a case study of PVD improved ground with preloading, in which average results of the stochastic analysis showed a good agreement with field monitoring data.

• 한국의류학회지
• /
• 제18권5호
• /
• pp.674-681
• /
• 1994

In this study, four kinds of vapor-permeable waterproofed fabrics were selected and their properties and the changes of properties were investigated after laundering, petroleum drycleaning or tetrachloroethylene drycleaning (each 1, 5, 10 times). The results were as follows: 1) In the water resistance, only Gore Tex satisfied its minimum property requirements, $1.0kg/cm^2$ It decreased after laddering and drycleaning. Hipora-1000, Hipora-2000, Aitac decreased slightly by petroleum drycleaning and Gore Tex decreased slightly by all three methods. 2) In the moisture vapor transmission, three except Hipora-2000 satisfied its minimum property requirement, $4000g/m^2{\cdot}24hr$.24hr. After laundering and drycleaning, it increased regardless of cleaning methods. 3) In the water repellency, Hipora-lOOG, Hipora-2000 were not almost decreased after laundering and drycleaning. Aitac decreased slightly by petrolem drycleaning and Gore Tex decreased slightly by laundering and petroleum drycleaning. 4) Air permeability of Aitac increased with increasing of cleaning times regardless of cleaning methods. 5) In the bond strength, only Gore Tex dissatisfied its minimum property requirements, 250g/cm. Regardless of cleaning method, bond strength decreased with increasing of cleaning times. 6) Color difference was large in case of Hipora-1000 by laundering, Hipora-2000 by laundering and tetrachloroethylene drycleaning Aitac by tetrachloroethylene drycleaning, Gore Tex by laundering. To diminish property change of vaper-permeable waterproofed fabric, petroleum drycleaning is more effective than laundering and tetrachloroethylene drycleaning.

• KCI Concrete Journal
• /
• 제11권3호
• /
• pp.19-28
• /
• 1999

This study treated self-compacting high Performance concrete as two Phase materials of Paste and aggregates and examined the effect of powder and aggregates on self-compacting high performance, since fluidity and segregation resistance of fresh concrete are changed mainly by paste. To improve the fluidity and self-compactibility of concrete, optimum powder ratio of self-compacting high performance concrete using fly ash and blast-furnace slag as powders were calculated. This study was also designed to provide basic materials for suitable design of mix proportion by evaluating fluidity and compactibility by various volume ratios of fine aggregates, paste, and aggregates. As a result, the more fly ash was replaced, the more confined water ratio was reduced because of higher fluidity. The smallest confined water ratio was determined when 15% blast-furnace slag was replaced. The lowest confined water ratio was acquired when 20% fly ash and 15% blast-furnace slag were replaced together. The optimum fine aggregates ratio with the best compactibility was the fine aggregate ratio with the lowest percentage of void in mixing coarse aggregate and fine aggregate In mixing the high performance concrete. Self-compacting high performance concrete with desirable compactibility required more than minimum of unit volume weight. If the unit volume weight used was less than the minimum, concrete had seriously reduced compactibility.

• Structural Engineering and Mechanics
• /
• 제47권4호
• /
• pp.513-530
• /
• 2013

In this paper, an improved version of particle swarm optimization based optimum design algorithm (IPSO) is presented for the steel grillage systems. The optimum design problem is formulated considering the provisions of American Institute of Steel Construction concerning Load and Resistance Factor Design. The optimum design algorithm selects the appropriate W-sections for the beams of the grillage system such that the design constraints are satisfied and the grillage weight is the minimum. When an improved version of the technique is extended to be implemented, the related results and convergence performance prove to be better than the simple particle swarm optimization algorithm and some other metaheuristic optimization techniques. The efficiency of different inertia weight parameters of the proposed algorithm is also numerically investigated considering a number of numerical grillage system examples.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 1995년도 봄 학술발표회 논문집
• /
• pp.195-202
• /
• 1995

In this study, the optimization program is developed to provide preliminary designs of steel-box girder bridges with minimum cost. The advantages of steel-box girder deck, when comparing with other girder types, are higher torsional rigidity and better resistance against corrosion. To achieve more rational design, systematic design procedure is required, by which the design constraints on steel-box girder are satisfied and the design variables with minimum cost are obtained. In the Proposed optmum design Process, the design variables are forced to be selected from the available discrete value set. The efficiency of the developed program has been verified by companing with previous designed sections and the resulting optimum cost with discrete variables has been compared with those of continuous variables.