• Korean Journal of Materials Research
• /
• v.26 no.4
• /
• pp.207-211
• /
• 2016

Ti films were deposited on glass substrates under various preparation conditions in a chamber of two-facing-target type dc sputtering; after deposition, the electric resistivity values were measured using a conventional four-probe method. Crystallographic orientations and microstructures, including the texture and columnar structure, were also investigated for the Ti films. The morphological features, including the columnar structures and surface roughness, are well explained on the basis of Thornton's zone model. The electric resistivity and the thermal coefficient of the resistivity vary with the sputtering gas pressure. The minimum value of resistivity was around 0.4 Pa for both the $0.5{\mu}m$ and $3.0{\mu}m$ thick films; the apparent tendencies are almost the same for the two films, with a small difference in resistivity because of the different film thicknesses. The films deposited at high gas pressures show higher resistivities. The maximum of TCR is also around 0.4 Pa, which is the same as that obtained from the relationship between the resistivity and the gas pressure. The lattice spacing also decreases with increasing sputtering gas pressure for both the $0.5{\mu}m$ and $3.0{\mu}m$ thick films. Because they are strongly related to the sputtering gas pressures for Ti films that have a crystallographic anisotropy that is different from cubic symmetry, these changes are well explained on the basis of the film microstructures. It is shown that resistivity measurement can serve as a promising monitor for microstructures in sputtered Ti films.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.7
• /
• pp.718-728
• /
• 2013

Analysis of scenarios of transportation oil and gas which produced in the Arctic and others cold seas shows that in the near-term there will be a significant increase of tonnage of tankers for oil and gas and number of ships which should be exploited in difficult ice conditions. For the construction of ice-resistant structures (IRS) intended for production of oil and gas and transportation of these products at ice-class vessels, calculating the load from ice to board the ship and on surface of supports of the platforms are the actuality and urgent tasks. These tasks have one basis in both cases: at beginning of the contact occurs fracture of edge of ice, then occurs compressing of rubble shattered of ice, then they extruding from contact area, after this next layer of ice begin to destruct. At calculating the strength of plating and elements construct of vessels, icebreakers and ice-resistant platforms the specific energy of mechanical destruction ice ${\epsilon}_{cr}$ is an important parameter. For the whole period of study of physical and mechanical characteristics of sea ice have been not many experimental studies various researchers to obtain numerical values of this energetic characteristic of the strength of ice by a method called Ball Drop Test. This study shows that the destruction of the ice from dynamic loading in zone of contact occurs in several cycles, and the ice destructed with a minimum numerical values of ${\epsilon}_{cr}$. The author offer this energy characteristic to take as a base value for the calculation of ice load on ships and offshore structures.

• Microbiology and Biotechnology Letters
• /
• v.46 no.3
• /
• pp.225-233
• /
• 2018

In this exploratory study, eight types of microalgae from different phyla (Chlamydomonas reinhardtii, Chlorella species, Haematococcus pluvialis, Porphyridium purpureum, Porphyridium cruentum, Isochrysis species, Isochrysis galbana, and Pavlova lutheri) were tested for their antibacterial activities against eight target pathogenic bacterial strains. The agar well diffusion method and broth micro dilution assay were conducted to estimate the antibacterial activity. Microalgae cell-free supernatants, exopolysaccharides (EPS), water, and organic solvent extracts were used for inhibition analysis. EPS extracted from P. lutheri showed activity against Bacillus subtilis and Pseudomonas aeruginosa. Inhibition zone diameters of 14-20 mm were recorded on agar plates, while the minimum inhibitory concentrations in the broth micro dilution assay were $0.39-25mg\;ml^{-1}$. During this study, haptophyte microalgae, Isochrysis species, and P. lutheri extracts showed the highest activity against most of the tested pathogenic bacterial strains, while most of the extracts were active against the important foodborne pathogen P. aeruginosa. This study showed promising results regarding important microalgae phyla, which will further aid research related to extracts and exploitation of bioactive metabolic compounds in the food and pharmaceutical industries.

• KIEAE Journal
• /
• v.10 no.3
• /
• pp.43-50
• /
• 2010

Natural lighting is directly connected with our mental and physical health. For working or learning effect, the proper natural lighting is required for improving our living conditions. School facilities, especially, are the place where includes students' ordinary activities with learning behaviors during the school years from elementary to high school. This study was carried out for the purpose introducing a basic database in that planning a school by researching on the actual in the natural lighting system of some schools' classroom, estimating, and analyzing through a simulation, which resulted in a method of improving the natural lighting system. As a result of measuring and analyzing Daylight Factor(DF) during the time from 9 am to 3 pm when students are activating in their classroom, generally DF range of the sides near to window and aisle seats zone are not distributed well. Besides, two out of four school which are researched would not reach the standards of the law for school sanitary while rest of the schools meet the standards; Average DF 5% and Minimum DF 2%. And the result of a simulation by RADIANCE program shows the most appropriate DF range when it is applied in variable numbers about an oriehows the- South-east 15, south-east 30, south-east 45, south-west 15, south-west 30, and south-west 45 degrees. When it is applied in the variable numbers about glass transmittance - 60%, 70%, and 80% in condition facing south of a classroom, the result shows that the DF range of 80% transmittance is relatively higher than other glasses in the classroom. Thus, when a school is built, plans for an orientation is necessary for improve of elementary schools' environment with the glass installation which is made for high transmittance and is regarded with the students' activities time.

• The korean journal of orthodontics
• /
• v.23 no.2 s.41
• /
• pp.165-177
• /
• 1993

Upper canine is important because it protects and maintains the stability of the dental arch and also, joins the anterior with the posterior teeth. The incidence of impaction of upper canine is the second most frequent next to the third molar because it takes a long period of time to develop, and has a complicated path of eruption, and erupts lately. After the age of 10, clinical and radioglaphic examination can be used in revealing the possibility of impaction and efforts should be put to reduce the side effects. To prevent impaction, selective extraction of primary canine at the age of 8 to 9 could be considered and prolonged retention of primary canine in oral cavity should be avoided at this time. Once the impaction is iden, the first stage of the treatment is to lcocalize the lesion by radiographic examination and According to the severity, orthodontic traction or autotransplantation should be considered and comprehensive diagnosis and treatment plan of malocclusion should be established. Generally, labial impaction is due to arch length discrepancy and palatal impaction is due to malposition or morphologic pathosis of lateral incisors rather than arch length discrepancy. In surgical procedure, peridontal problems should be considered and the minimum amount of bone and soft tissue should be reduced and direct bonding method of many attachment methods should be recommended. Especially in traction of labially impacted canine, it should be guided to erupt through the keratinized zone and proper forced magnitude should be applied. The importance of periodontal condition should always be in mind following the patient education to mintain the good oral hygiene at each stage of treatment. Properly managed impacted canine can provide function and esthetic by proper diagnosis and treatment if extraction of canine is not indicated.

• Analytical Science and Technology
• /
• v.30 no.1
• /
• pp.26-31
• /
• 2017

Background and purpose: This study was carried out to learn more about the potential prophylactic or antibacterial activity of the plant Acalypha indica against selective pathogenic bacteria. Experimental: The test organisms were Sarcina lutea IFO 3232, Bacillus subtilis IFO 3026, Pseudomonas denitrificans, Escherichia coli IFO 3007, Klebsiella pneumoniae ATTC 10031, Xanthomonas campestris IAM 1671, and Proteus vulgaris. Leaf, stem, and bud powder of Acalypha indica were dissolved in various solvents, and the extracts were tested for antimicrobial activity through the disc diffusion method. GC-MS profiling was performed to characterize active chemical compounds in the essential oil of Acalypha indica. Results: The ethanol extract showed the highest activity against all bacteria, while the petroleum ether extract yielded the highest zone of inhibition against Proteus vulgaris ($11.83{\pm}1.75mm$). The minimum inhibitory concentration (MIC) of the ethyl acetate extract against Bacillus subtilis was 16 µg/mL. Phytochemical screening by GC-MS revealed a total of 12 bioactive compounds. Conclusion: Extracts of Acalypha indica may be useful in formulating and synthesizing new antibacterial drugs.

• Korean journal of food and cookery science
• /
• v.31 no.5
• /
• pp.515-523
• /
• 2015

In the study reported here, the antimicrobial and antioxidant activities of the ethanol leaf extract of Dendropanax morbiferus Lev. from Jeju Island was investigated. Of the 14 strains of 12 species of microorganisms tested, the extract exhibited antimicrobial activity observed against seven Gram-positive bacteria of four species, but not against six Gram-negative bacteria and a yeast strain. Using the disc diffusion method, the diameter of the inhibition zone increased with application of the extract with every strain and the highest growth inhibition was exhibited with Staphylococcus aureus KCTC 1916 at 5 mg/ml. The minimal inhibitory concentration of the extract (MIC) by turbidity was 2.5 mg/ml against Bacillus cereus KACC 12672 and 15 mg/ml when with Enterococcus faecalis KCTC 3206. The minimum bacterial concentration (MBC) values defined as being $${\geq_-}99.9%$$ reduction in viable cells against the tested strains was higher than the MIC values. Time killing curves using the optimum MIC were performed on seven strains incubated for 48 hr. The growth of B. cereus KACC 12672 was detected after 12 hr and no significant growth was found in the others strains after 48 hr (p<0.05). The 1,1-diphenyl-2-picrylhydrazyl (DPPH) scavenging activity of the ethanol leaf extract was similar to that of butylated hydroxyanisole (BHA) at the same concentration. These results indicate that leaf extract of D. morbiferus Lev. can be utilized as a natural preservative and an antioxidant.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4133-4137
• /
• 2011

Reliable Multi-Reader RFID identification is one of issues in Multi-Reader RFID realization program in recent. And the Multi-Reader RFID reader has difficulty to obtain reliable data in data capture layer. The reason is that unreliable readings such as a false positive reading and a false negative reading and missed readings can happen by reader collision problems, noise, or the mobility of tagged objects. We introduce performance metrics to solve these reader problems. We propose three solutions the Minimum Overlapped Read Zone (MORZ) with Received Signal Strength Indicator (RSSI), the Spatial-Temporal Division Access (STDA) method, and double bigger size of tags attached on the object. To show the improvement of the proposed methods, we calculate tag's successful read rates in a smart office, which consists of Multi-Reader RFID systems.

• Korean journal of food and cookery science
• /
• v.16 no.1
• /
• pp.40-46
• /
• 2000

The sensitivity of various pathogenic bacteria(Listeria monocytogenes, Staphylococcus aureus, Aeromonas hydrophila, Escherichia coli O157:H7 and Salmonella typhimurium) to the pine needle and green tea extracts was tested. Water extract of pine needle(PNW), 70% ethanol extract of pine needle(PNE), water extract of green tea(GTW) and 70% ethanol extract of green tea(GTE) were prepared for the test of antibacterial activty. Tryptic soy broth(TSB) containing 0∼2%(w/v) of pine needle and green tea extracts were inoculated with 10$\^$5/∼10$\^$6/ cells/ml of each bacterium and incubated at 35$\^{C}$ for 24 hours. The standard plate count method was used to measure the inhibitory effect of the extracts. Minimum inhibitory concentration(MIC) and minimum bactericidal concentration(MBC) were derived from the survival curves of pathogenic bacteria. Antibacterial activities of the pine needle and green tea extracts were compared with that of sodium benzoate, a preservative, by clear zone test. L. monocytogenes, S. aureus and A. hydrophila were completely inhibited at 0.4∼1.6% level while E. coli and S. typhimurium were very resistant to the pine needle extracts. Green tea extracts completely inhibited all strains tested at 0.2∼1.0% level and bactercidal to all strains except L. monocytogenes at 0.5∼2.0% level. Antibacterial activities of pine needle and green tea extracts were stronger than that of sodium benzoate. The order of antibacterial activities of pine needle and green tea extracts to the pathogenic bacteria was GTE > GTW > PNE > PNW. This result suggests that green tea extracts can be used as an effective natural antibacterial agent in food.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.2
• /
• pp.155-161
• /
• 2021

This study was attempted to investigate natural materials with antimicrobial activity and to apply as natural preservatives in cosmetics. The disc diffusion method was used to search for nine species of natural antibacterial material for three species of skin pathogenic bacteria (Staphylococcus aureus, Escherichia coli, Pseudomonas aeruginosa) and Candida albicans. As a result of measuring the size of inhibition zone, Rhus Semialata gall (Gallnut) extract, Oak vinegar, and ε-polylysine were showed strongest antibacterial activities (> 10 mm). The Minimum Bactericidal Concentration (MBC) of gallnut and oak vinegar ranged from 10 to 20 mg/mL and from 20 to 40 mg/mL against five human skin pathogens. The MBC of ε-polylysine ranged from 0.5 to 2 mg/mL in fungus. The synergic effect of gallnut extract/oak vinegar mixture and gallnut extract/ε-polylysine mixture were evaluated by checkerboard test. Compared to when used alone, the MBC of gallnut extract/oak vinegar mixture were at 4 times lower concentration against E. coli, C. albicans, and A. brasiliensis. Also Furthermore, the MBC of gallnut extract/ε-polylysine mixture were at 4 times lower concentration against C. albicans and A. brasiliensis. It was confirmed that the combination of gallnut extract with oak vinegar or ε-polylysine resulted in synergistic antibacterial effect against three human skin pathogens. Thus, it is expected that gallnut extract and natural product mixture can not only demonstrate antibacterial synergies, but also be applied in cosmetics as a natural preservative system with a wide antibacterial spectrum.