• 대한족부족관절학회지
• /
• 제18권4호
• /
• pp.195-201
• /
• 2014

Purpose: The purpose of this study is to develop guidelines for clinical trial of the total ankle replacement system for premarket approval. Materials and Methods: We selected and analyzed nine peer-reviewed articles whose quality had been proven in a previous phase. Two investigators extracted parameters for guideline criteria, including number of cases, patient age, follow-up period, failure rate, radiographic osteolysis rate, residual pain rate, and percentage of satisfaction. In addition, the inclusion and exclusion criteria were analyzed and developed. Results: Eight level IV studies and one level II study were included. The average number of cases was 159 cases and the mean patient age was 63.5 years. The mean follow-up period was 4.2 years, ranging from two to nine. The average failure rate of total ankle replacement in mid- to long-term follow-up was approximately 13% (2%~32.3%). The rate of osteolysis was approximately 18%. Residual pain was common (21.4%~46%), but overall patient satisfaction was approximately 85.6% (67.5%~97%). Conclusion: The results could be used as criteria for designing the clinical studies, such as number of cases, patient age (over 60 years), and follow-up period (minimum two years). The clinical scoring system and 36-item short form health survey (SF-36) was the most commonly used method for clinical evaluation for total ankle arthroplasty. In addition, the overall results, including failure rate, osteolysis rate, and patient satisfaction, could be used as a parameter of guidelines for premarket approval.

• 한국통신학회논문지
• /
• 제36권12A호
• /
• pp.941-949
• /
• 2011

선택적 협력 공간 다중화 기술은 단일 안테나를 갖는 소스 노드, 다수의 중계기와 다중 안테나를 갖는 도착 노드가 있는 환경에서 공간 다중화 이득과 추가적인 선택적 다이버시티를 동시에 얻을 수 있다. 그러나 이 방법은 특정 중계기에서 전달된 심볼이 경로 손실에 의해 손실될 수 있는 단점이 있다. 본 논문에서는 이러한 단점을 보완하고 비트 오류율 성능을 향상시키기 위해 전체 중계기 중에서 고정된 수의 중계기를 선택하는 대신 주어진 데이터 전송률 이상의 채널 용량을 갖는 중계기를 기회적으로 선택하고 협력 단계에서 신호를 전달할 때 선택된 중계기와 수신단 사이의 채널을 고려하여 공간 다중화 전송 모드와 공간 다이버시티 전송 모드 중 하나를 결정하는 방법을 제안한다. 제안된 방법은 기존의 방법에 비해 추가적인 공간 다이버시티 이득을 얻음으로써 낮은 SNR 영역에서 약 1.5~2dB의 이득을 얻을 수 있다.

• 한국전자파학회논문지
• /
• 제13권1호
• /
• pp.94-100
• /
• 2002

본 논문에서는 N개의 평행 결합선로를 이용한 3 dB 결합기를 해석하였으며, 유도된 식에 의하여 최소의 결합선로 수와 크기로 설계하였다. 기존의 Spectral Domain상에서 N단 평행 결합선로의 4N-port의 산란행렬로부터 port reduction 방법을 사용하여 4-port 산란 행렬을 유도하였으며, 유도된 결과의 타당성을 검증하기 위하여 실제 제작하고 측정하였다. 제작된 결합기는 loose coupling의 평행 결합 선로를 이용하기 때문에 Lange Coupler 와 같은 높은 임피던스와 Tight coupling을 구현할 필요가 없으며, wire bonding포 용이하다. 최소의 단수로 구현하기 위해 높은 유전율과 두꺼운 기판을 사용하여 2단으로 3 dB 구현이 가능함을 제시하였다. 제작결과 3.6 GHz에서 5.5 GHz로 대략 42 %(0.5 dB unbalance) 정도의 광대역 특성을 가지고 위상차도 1$^{\circ}$내외의 결합기를 구현할 수 있었고 격리도 특성 또한 대역 내에서 15 dB 내외의 특성을 보였다.

• 한국산학기술학회논문지
• /
• 제8권6호
• /
• pp.1458-1464
• /
• 2007

현재 국내 외 제조 산업은 기업 시스템의 노후화 등의 많은 문제들이 발생하고 있다. 현재의 자동차 부품공장에서의 불량품에 대한 처리방법은 제품의 생산이 완료된 후 테스트 단계를 거쳐 양품과 불량품을 분류하고 불량품이 발생하면 생산을 중단하고 생산라인의 상태를 점검하는 방식이다. 본 연구에서는 자동차 부품공장의 생산라인에서 불량품 생산을 줄이고 생산라인 가동시간의 지연을 줄이기 위한 생산성 향상을 위한 모니터링 솔루션에 대해 제안한다. 생산성 향상을 위한 모니터링 솔루션은 제품 조립의 각 단계마다 테스트를 통해 데이터를 수집하고, 수집한 데이터에서 불량이 예상되면 알람기능을 이용해서 경고를 하도록 설계하였다. 경고 메시지를 통해 불량이 예상되는 곳에 대해 조기에 조치하여 불량품이 나올 확률을 최소한으로 하고 제품의 생산지연 시간을 줄이는 것을 목표로 한다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권9호
• /
• pp.423-429
• /
• 2002

RuOx thin films were fabricated by the method of liquid delivery MOCVD using Ru(C$_{8}$ $H_{13}$ $O_2$)$_3$ as the precursor and their thermal effects and conductivity were investigated. Ru films deposited at 25$0^{\circ}C$ were annealed at $650^{\circ}C$ for 1min with Ar, $N_2$ or N $H_3$ ambient. The changes of the micro-structure, the surface morphology and the electrical resistivity of the Ru films after annealing were studied. Ar gas was more effective than $N_2$ and N $H_3$ gases as an ambient gas for the post annealing of the Ru films, because of smaller resistivity and denser grains. The X-ray diffraction and X-ray photoelectron spectroscopy results indicate that the Ru $O_2$ phase and the silicidation are not observed regardless of the ambient gases. The minimum resistivity of the Ru film is found to have the value of 26.35 $\mu$Ω-cm in Ar ambient. Voids were formed at Ru/TiN interface of the Ru layer after annea1ing in $N_2$ ambient. The $N_2$ gas generated due to the oxidation of the TiN layer accumulated at the Ru/TiN interface, forming bubbles; consequently, the stacked film may peel off the Ru/TiN interface.e.

• Transactions on Electrical and Electronic Materials
• /
• 제13권3호
• /
• pp.116-120
• /
• 2012

In this paper, ZnO-Epoxy nanocomposites (NEP) were prepared and epoxy composites that contain 5 wt% micro ZnO (MEP) and deliberately not well dispersed nano ZnO (NDNEP) were also prepared for purpose of comparison. The effects of the particle size and dispersion of ZnO on dielectric properties of epoxy resin were chiefly studied. Test results showed that: at a loading of 5 wt%, the three epoxy composites seem to have no significant difference on resistivity compared to epoxy resin; Dielectric constants of all the epoxy composites are also basically the same but they are bigger compared to that of the pure epoxy resin (unfilled); Dielectric dissipation factors ($tan{\delta}$) of NDNEP is greater than that of NEP and MEP. NEP has the minimum dielectric loss factor, whereas dielectric loss factors of the three epoxy composites are larger than that of the pure epoxy resin. The decreasing order of electrical breakdown strength for the three epoxy composites and for the pure epoxy resin is as follows: NEP>MEP>NDNEP>EP. Finally, in order to explain the experimental results the aggregation interface phase was proposed. Furthermore, addition of well dispersed nano filler has proved to have a positive effect on the improvement of the dielectric properties of epoxy resin.

• 한국가구학회지
• /
• 제17권4호
• /
• pp.1-13
• /
• 2006

This study attempted to identify the characteristics of chair design from furniture company, $K{\ddot{a}}llemo$, the furniture manufacturer in Sweden manufacturing mostly the limited edition of art furniture on the basis of the unique management philosophy. There are 12 artists manufactured chairs for $K{\ddot{a}}llemo$. Of them, this study selected 4 artists-Sigurdur Gustafsson, John Kandell, Komplot Design, Mats Theselius-who designed at least more than three chairs. Total 25 chairs were analyzed; 6 from Sigurdur Gustafsson, 8 from John Kandell, 3 from Komplot Design and 8 from Mats Theselius. The chair structure was divided into three parts, seat, back and structure and analyzed by material, color, type of legs and finishing. The following results were derived from the study. First, $K{\ddot{a}}llemo$ secured the regular customers who want to possess the chairs as the artistic works by continuing the small quantity mass-production system insisting that the maximum quantity of production is 360 pieces and the minimum quantity is 33 pieces. Second, the sufficient time and cost were invested in the initial phase of design. This approach seems to be deviated from the traditional business system that has to create the revenue at a glance, but ultimately induces the commercial success by exponentially increasing the revenue through the creation of various product lines. Third, $K{\ddot{a}}llemo$ provides the space that the artists who work for $K{\ddot{a}}llemo$ can sufficiently enjoy the mental composure and luxury required for the designers by strictly selecting the artists and providing the best environment for enabling the creative activities that look like the pure art area. This study enables the further analysis and research on other collections of $K{\ddot{a}}llemo$ that mass-produces the chairs on the basis of the unique philosophy in the world as well as in Sweden using more various kinds of analysis frameworks.

• 한국해안해양공학회지
• /
• 제6권4호
• /
• pp.364-374
• /
• 1994

본 연구에서는 순압모델을 이용하여 대마난류(Tsushima Warm Current)의 분기기작 및 계절별 분기위치의 변화에 바람이 미치는 영향을 살펴보았다. 모델 격자간격은 위도와 경로방향 모두 0.25$^{\circ}$로 하였고 해수표면에 적용한 계절별 바람응력은 Hellerman and Rosenstein(1983)의 바람을 이용하였다. 모델결과에 의하면 대마난류는 북풍계열의 바람이 강한 동계(10월-3월)에는 일론 큐슈 남서쪽 대륙사면에서 쿠로시오로부터 직접 분기되어 형성되며, 하계(4월-9월)에는 대만해협(Taiwan Strait)을 통해 유입된 대만난류가 대마난류의 기원으로 나타난다. 쿠로시오는 동계에 최대 수송량을 가지며 하계에 최소를 보이고, 대만난류(Taiwan Current)의 수송량은 이러한 쿠로시오와 약 160도의 위상차를 갖는다. 대마난류의 수송량 변화는 쿠로시오의 변화와 120$^{\circ}$의 위상차(약 4개월)를 가질 때 잘 일치한다.

• 자원리싸이클링
• /
• 제9권4호
• /
• pp.44-49
• /
• 2000

중저타소페로망간을 제조하는 AOD공정의 bag filter에 포집된 분진은 약 63%의 Mn을 함유하며, XRD로 분석된 결정체는 Mn$_{3}O_{4}$이지만, 질산으로 Mn을 침출하면 MnO$_{2}$가 잔류되기 때문에 67%이하의 침출율을 나타낸다. 따라서 활성탄으로 환원배소한 후에 침출하는 방법과 침출시에 활성탄을 첨가하는 방법으로 침출율을 높이고자 하였따. 70$^{\circ}C$, 0.5N HNO$_{3}$ pilp density 7 g/l 의 액에 분진된 10%이상으로 활성탄을 첨가하면 90%이상의 Mn이 침출되었고, 5%의 활성탄을 혼합하여 750$^{\circ}C$에서 배소한 분진은 상온에서 6N HNO$_{3}$에 150 g/l을 첨가하였을 때에 99%이상의 Mn이 침출되었다.

• 한국운동역학회지
• /
• 제20권4호
• /
• pp.381-386
• /
• 2010

This study examined the changes in the walking pattern during level walking under low illumination conditions. Fourteen male subjects ($22.1{\pm}2.21$ years, $174{\pm}3.74\;cm$, $68.86{\pm}10.81\;kg$) with normal vision and no disabilities were enrolled in this study. All experiments were performed on a level walkway with three conditions: normal walking (preferred & low speed) and walking with low illumination. 3D motion capturing system was used for acquisition and analysis of the walking motion data with a sampling frequency of 120Hz. The walking speed, normalized jerk(NJ) at the center of mass(COM), wrist and heel, knee and elbow joint angle, ratio of the knee joint angle to elbow joint angle and the toe clearance on stance phase were used to compare the differences in walking pattern between the two illumination conditions, The results showed that the walking speed and joint angles decreased in low illumination, whereas the NJ and toe minimum clearance increased. In low illumination, most variables were similar to effects of low speed walking, but toe clearance was different from the effects of low speed. These results can be used as primary data for examining the changes in the level walking pattern of young adults under low illumination. Further study will be needed to compare these results in young adults with those in the elderly.