• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.233-236
• /
• 2004

The major objective of this paper is to clarify the effect of constitutive laws on bulk forming design based on the ideal flow theory. The latter theory is in general applicable for perfectly/plastic materials. However, its kinematics equations constitute a closed-form system, which are valid for any incompressible materials, therefore enabling us to extend design solutions based on the perfectly/plastic constitutive law to more realistic laws with rate sensitive hardening behavior. In the present paper, several constitutive laws commonly accepted for the modeling of cold and hot metal forming processes are considered and the effect of these laws on one particular plane-strain design is demonstrated. The closed form solution obtained describes a non-trivial nonsteady ideal process. The design solutions based on the ideal flow theory are not unique. To achieve the uniqueness, the criterion that the plastic work required to deform the initial shape of a given class of shapes into a prescribed final shape attains its minimum is adopted. Comparison with a non-ideal process is also made.

• 한국기계가공학회지
• /
• 제18권8호
• /
• pp.24-30
• /
• 2019

This study investigated the heat dissipation characteristics of a heat-sensitive LED. The results of the empirical test showed that the best temperature intensification was found at 90 with 15-fins, and the heatsink installed perpendicular to the direction of the flow of air was directly connected to the air in the largest heat shield area, leading to the best cooling, and the number of fin also resulted increase in the heat discharge area, resulting in the largest cooling action with 15 fins. It was found that the rate of air flow changed in the range of 1.5m/s to 2.5m/s, but only by a deviation of about $2^{\circ}C$ to $3^{\circ}C$ from the current state of 15 fins at 2.5m/s, and the rate of air flow increased, but the performance of the heat release was not significantly increased. As a result wind speed with minimum air flow conditions of 1.5m/s can greatly contribute to the heat dissipation performance.

• Tribology and Lubricants
• /
• 제20권2호
• /
• pp.84-90
• /
• 2004

It is very important to improve the durability and reliability of crankshaft because of conflicting demands for lower fuel consumption and higher power output. In this study, for the crankshaft bearing design, analyses were conducted to determine the lubrication characteristics such as oil flow rate, minimum oil film thickness, friction force and increase of oil temperature at main bearing and connecting rod bearing. Additionally, supplied oil pressure and temperature effects on the bearings were simulated to figure out lubrication characteristics on the bearings. Finally the effects of increasing the bearing width and clearance were introduced on the lubrication characteristics.

• 음성과학
• /
• 제6권
• /
• pp.145-161
• /
• 1999

21 normal Korean native speakers participated as subjects to investigate the acoustic and aerodynamic study of Korean fricatives and affricates and to make good use of the results for the patients with articulation problems. Their productions of [sa], [s'a], [ca], [$c^{h}a$], [c'a], [asa], [as'a], [aca], [$ac^{h}a$], and [ac'a] were analyzed with CSL and AP II instruments. The results are as followings: (1) Fricatives showed higher frequency in minimum and maximum frequency and longer duration than affricates. (2) Fricatives showed higher peak flow rate and longer rise time than affricates. (3) When we compared the different phonemes with each other, their differences were usually statistically significant, but when we compared CV and VCV syllables, they did not show significant difference, even VCV's showed higher and longer values than CV syllables. (4) Normaly, lax fricatives and affricates showed lower frequency and higher peak flow rate, shorter frication duration, and longer rise time.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1996년도 제23회 학술대회
• /
• pp.17-23
• /
• 1996

Gerotor Pump and Motors are widely used in lubrication and hydraulic actuator systems, These have many advantage compared with internal gear pump and motors, But the gerotor profile have not been sufficiently analyzed theoretically. So it is vary difficult for designer to decide the specifications of the gerotor profile, and it is not yet confirmed to calculating flow rate and minimum distance of clearance in the contact point of inner and outer rotor. In this paper, When we design inner and outer rotor concurently, We have analyzed the gerotor and displayed the calculated results such as flow rate, minumum distance between inner and outer rotor and gerotor profiles

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 1995년도 추계학술발표회논문집(2)
• /
• pp.771-776
• /
• 1995

Tensile and J-R tests were carried out to estimate the effects of dynamic strain aging(DSA) on SA106Gr.C piping steel. Tensile tests were performed under temperature range RT to $400^{\circ}C$ md strain rates from $1.39{\times}10^{-4}\;to\;6.95{\times}10^{-2}/s$. Fracture toughness was tested in the temperature range RT to $350^{\circ}C$ and load-line displacement rates 0.4 and 4mm/min. The effects of DSA on the tensile properties were clearly observed for phenomena such serrated flow, variation of ultimate and yield stress, and negative stram rate sensitivity. However, the magnitude of serration and strength increase by DSA was relatively small. this may be due to high ratio of Mn to C. In addition, crack initiation resistance, Ji and crack growth resistance, dJ/da were reduced in the range of $200-300^{\circ}C$, where DSA appeared as serrated flow and UTS hardening. The temperature corresponding to minimum fracture resistance was shifted to higher temperature with increasing loading rate.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.690-692
• /
• 2005

Among many other alternative energy resources, small scale hydropower has been brought into attention as a reliable source of energy today, which had been relatively neglected since 1960s. Present low head of Francis turbines and small scale hydro turbines, however, have limitations in the minimum required head and flow rate for efficient operation. This study attempts to develope the Francis turbine which is expected to run efficiently even in very low head and small flow rate, so that the limitations on the conventional small scale hydropower could be alleviated and competition with other alternative energy sources in the changable design conditions could be attained. The Francis turbine of a new concept was designed based on changable design conditions, hydrodynamics and theory of power transmission.

• 동력기계공학회지
• /
• 제9권3호
• /
• pp.39-43
• /
• 2005

Among many other alternative energy resources, small scale hydropower has been brought into attention as a reliable source of energy today, which had been relatively neglected since 1960s. Present low head of Francis turbines and small scale hydroturbines, however, have limitations in the minimum required head and flow rate for efficient operation. This study attempts to develope the Francis turbine which is expected to run efficiently even in very low head and small flow rate, so that the limitations on the conventional small scale hydropower could alleviated and competition with other alternative energy sources in the changable design conditions could attained. The Francis turbine of a new concept was designed based on changable design conditions, hydrodynamics and theory of power transmission. The result of the study shows that two stages runner is more efficient, cheaper in construction, faster responding, and easier maintaining than single stage runner of Francis turbine

• 한국통신학회논문지
• /
• 제28권6B호
• /
• pp.588-603
• /
• 2003

본 논문은 Diffserv 방식에서 플로별 관리없이 Assured Service의 End-to-End 005를 향상시키기 위해 DiffServ 도메인의 입구라우터에서 플로별 관리를 수행하지 않는 Aggregate Three Color Marker를 제안하였다. 제안하는 Aggregate Three Color Marker는 Diffserv 방식에서 개별 플로에 대한 관리 없이 Assured Service의 QoS를 보장하기 위해 Adaptive RIO-DC 버퍼 관리 방식과 함께 사용된다. 제안하는 Aggregate Three Color Marker는 Assured Service에 대한 접속제어가 수행된 상황에서 입구라우터를 경유하는 개별 플로들이 전송하는 In-profile 트래픽 전송률들의 총합 만큼의 Token rate로서 입구 라우터로 유입되는 전체 In-profile 트래픽의 양을 측정하고, 허용된 In-profile 트래픽의 Aggregate Trafile profile 범위에 속하는 손실된 Token 양만큼 경유하는 Out-of-profile 패킷들을 Yellow 패킷들로 표기한다. 그리고 DiffServ 내부라우터에서는 In-profile 패킷과 Yellow 패킷을 동일하게 처리하며, 플로간의 공평성을 유지하기 위해 이전 도메인에서 입구라우터로 유입되는 Yellow 패킷은 Out-of-profile 패킷으로 환원된다. 시뮬레이션 결과는 제안하는 Aggregate Three Color Maker를 Adaptive RIO-DC와 함께 적용하여 다중 DiffServ 도메인 환경에서 플로별 관리없이 Assured Service에 대한 End-to-End QoS를 보장할 수 있음을 보인다.

• 대한기계학회논문집B
• /
• 제34권8호
• /
• pp.791-797
• /
• 2010

수도미터를 통한 유량측정 및 분석결과의 신뢰성은 측정정확도에 따라 좌우된다. 수도미터의 불감률은 수도사업자에게 재정손실이나 유수율 감소와 같은 많은 문제점을 야기시킨다. 본 연구의 목적은 실험적인 방법을 통하여 효율적인 운영관리 기술과 차별화된 서비스를 제공하기 위한 최적의 메커니즘 채택과 같은 핵심기술 개발과 지원을 하고자 함이다. 본 연구에서는 중고 수도미터를 이용하여 구경, 제작사, 사용연수 및 사용량별로 실험적으로 수행하였다. 연구결과 사용연수가 길어질수록 최소유량에 서의 오차가 "-" 방향으로 커지는 것을 확인하였다.