• 제목/요약/키워드: Minimum Distance

검색결과 1,181건 처리시간 0.233초

ISM 기기와 무선랜의 양립성에 관한 연구 (Study on Compatibility between ISM Equipment and WLAN)

  • 심용섭;이일규;조주필;민경일
    • 한국위성정보통신학회논문지
    • /
    • 제6권1호
    • /
    • pp.63-67
    • /
    • 2011
  • 본 논문은 MCL(Minimum Coupling Loss)와 MC(Monte-Carlo) 방법을 이용하여 같은 주파수를 사용하는 ISM(Industrial Scientific Medical) 기기와 무선랜이 공간적으로 인접하여 사용될 경우의 간섭 영향 분석을 통해 ISM 기기로부터 무선랜을 보호하기 위한 보호 거리를 제시하였다. CISPR(International Special Committee on Radio Interference)에서 규정한 ISM 기기의 기준치를 간섭 파워로 설정하여 ISM 기기로부터 무선랜을 보호하기 위한 보호 거리를 산출하였다. 그 결과 최악의 상황을 고려한 MCL 분석시 105 m의 보호 거리와 통계적 간섭 확률을 바탕으로 한 MC 분석시 17 m의 보호 거리가 각각 산출되었다.

액화석유가스 충전소의 안전거리에 관한 연구 (A Study on the Minimum Safe Separation Distance from LPG Filling Station)

  • 조영도
    • 한국가스학회지
    • /
    • 제3권2호
    • /
    • pp.24-33
    • /
    • 1999
  • 충전소에서 일어난 사고를 1987부터 1998년까지 사고자료를 근거로 하여 사고 시나리오와 사고발생 초기의 피해거리를 살펴보고, 이를 바탕으로 국내$\cdot$외 안전거리를 비교$\cdot$검토하여 적절한 안전거리에 대하여 살펴보았다. 안전거리는 시설과의 최소한 이격거리를 두어 사고 발생시 점화가능성을 줄이고 원활한 방재활동과 피해확산을 방지하기 위한 것으로서 가스누출시 제트화재의 길이 또는 누출가스의 연소하한농도의 도달거리와 관계가 있으며, 안전장치 설치현황, 안전관리자의 의식수준, 그리고 경제성을 검토하여 안전거리를 결정할 수 있도록 저장량에 따른 안전거리의 범위를 제시하였다.

  • PDF

Swimming behavior analysis of small box jellyfish (Carybdea brevipedalia)

  • Yongbeom Pyeon;Jinho Chae;Wooseok Oh;Doo Jin Hwang;Kyounghoon Lee
    • Fisheries and Aquatic Sciences
    • /
    • 제27권1호
    • /
    • pp.1-6
    • /
    • 2024
  • In this study, the swimming behavior of a small box jellyfish (Carybdea brevipedalia), which consists of inhaling external seawater and expelling it through its mouth to generate forward thrust, was characterized using particle image velocimetry (PIV). The flow rate and structure during the suction and discharge process were quantitatively analyzed. During swimming, there was a change in the ratio of the internal area during inhalation and expulsion. Specifically, there was a 1.10-fold difference between the maximum area after inhalation and the minimum area after discharge. The maximum distance traveled after discharge was inversely proportional to the size of the inner area, with a 2.48-fold difference in the minimum distance traveled after suction. Depending on the propulsion stage, the inner area decreased and then increased in proportion to the moving distance and speed. The moving distance of the small box jellyfish was measured for each period. The speed for each swimming stage increased and then decreased at intervals of 0.15 to 0.2 seconds, and the suction and discharge cycle period was measured at approximately 0.5 seconds. Collectively, our findings provide a methodological basis for studying the swimming behavior of small and highly active trailing jet jellyfish, as well as the biological mechanisms that determine this behavior.

발사체 고체추진제의 저장 및 시험 시 안전거리 산정에 관한 연구 (A Study on the Calculation of Minimum Safety Distance during Storage and Combustion Test of Solid Propellants for Launch Vehicles)

  • 신안태;박병문;변헌수
    • Korean Chemical Engineering Research
    • /
    • 제59권2호
    • /
    • pp.180-185
    • /
    • 2021
  • 한-미 미사일지침 개정으로 우주발사체에 대한 고체추진제 사용 제한이 완전히 해제 됐다. 고체추진제는 1단형 과학로켓 KSR-1과 같이 고체추진제 로켓으로 활용 가능하고, 액체연료 발사체의 추력증강 부스터로도 활용 가능하다. 고체추진제는 액체추진제에 비하여 폭발 위험성이 낮은 장점이 있지만 브라질 알칸타라 발사장 폭발사고와 같이 사고가 일어나면 대형 인명사고로 이어질 수 있다. 이와 같은 대형 인명사고를 예방하기 위해서는 고체추진제의 저장 및 시험 시 최소한의 안전거리에 대한 검토가 사업의 기획단계 부터 검토되고 반영 되어야 한다. 본 논문에서는 발사체 고체추진제를 안전하게 사용하기 위한 최소한의 안전거리를 저장시설과 시험 시로 구분하여 산정 기준 및 사례를 제시하였다.

Hydrodynamic movement of two rigid bodies in varied distance

  • 정유석;김현규
    • EDISON SW 활용 경진대회 논문집
    • /
    • 제5회(2016년)
    • /
    • pp.643-646
    • /
    • 2016
  • Fishes usually form a group in water to minimize drag coefficient and this fish schooling is one of representative problems in computational fluid dynamics. In this research, we simulated two fishes as a rectangle. We arranged rectangle horizontal and vertical, then we changed distance between two rectangles and simulated pressure of fluid and drag coefficient. We could find the best distance and position of two fishes that makes minimum drag coefficient.

  • PDF

자동차와 자전거 간 추월 최소요구 이격거리 추정 방법론 연구 (Methodology to estimate minimum required separation distance between vehicle and bicycle when overtaking)

  • 전우훈;이영인;양인철;이향미
    • 한국도로학회논문집
    • /
    • 제19권6호
    • /
    • pp.191-199
    • /
    • 2017
  • PURPOSES : The objective of this study is to develop a methodology to estimate the minimum required separation distance (MRSD) between a vehicle and a bicycle when overtaking. METHODS : Three steps have been conducted to develop a methodology to estimate MSRD. First, a literature review has been conducted on the measurement of MSRD, and how it may be applied in Korea. Second, two assumptions have been made to develop a methodology to estimate the MSRD. The first assumption is that the maximum separation distance between a vehicle and a bicycle can be observed when they are at the same location longitudinally. In addition, it is assumed that the separation distance is invalid when the contra-flow exists. Finally, three cameras were installed at a height of 10 m to record the vehicle-bicycle interaction. Moreover, the vehicle trajectories as well as the separation distance were coded and analyzed. Through the hypothesis test and the interval estimation, the sample mean was tested and the confidence interval was estimated. RESULTS : 141 records of separation distance data were collected, and the hypothesis test demonstrated that the MSRD in Korea is significantly higher than other countries. In addition, the confidence interval of the population mean of MSRD is from 1.51 m to 1.65 m with 95% level of confidence. CONCLUSIONS : It is expected that the proposed methodology to estimate MSRD would be beneficial in studying road safety of vehicles and bicycles. Also, the proposed MSRD is expected to be designated in the act of road and transportation.

각도 및 거리 유효성 검사를 적용한 블루투스 도래각 기반의 측위 방식 (Bluetooth AoA based Positioning Scheme using Angle and Distance Validation Test)

  • 송경희;백정훈
    • 방송공학회논문지
    • /
    • 제26권6호
    • /
    • pp.790-798
    • /
    • 2021
  • 본 논문에서는 기존의 도래각을 활용한 블루투스 기반의 측위방식에 각도 및 거리 유효성 검사를 추가하여 측위의 정확도를 개선하는 방식을 제안한다. 기존의 측위방식은 비 가시거리 환경에서 유발되는 다중경로 현상 등에 의하여 측위 값에 오차가 발생하는 현상이 발생한다. 제안된 방식은 피 측위 장치의 이동속도를 고려하여 측정될 수 있는 최대 도래각과 최소 도래각을 도출한 후 측정된 도래각이 최대 도래각과 최소 도래각 범위를 초과하는지를 검사하는 각도 유효성 검사와 측정된 피 측위 장치의 위치 및 측위 장치와의 거리가 유효거리를 초과하는지 검사하는 거리 유효성 검사를 시행하여 측위의 정확성을 제고한다. 제안된 방식과 기존 방식과의 측위 성능을 분석하기 위하여 모의실험을 실시하고, 모의실험 결과를 통해 측위 오차가 증대되는 상황에서는 기존의 방식에 비하여 각도 및 거리 유효성 검사를 통해 측위 성능이 개선됨을 확인한다.

공간국부성을 최적화하는 클러스터링 방법 (A Clustering Method for Optimizing Spatial Locality)

  • 김홍기
    • 한국정보과학회논문지:데이타베이스
    • /
    • 제31권2호
    • /
    • pp.83-90
    • /
    • 2004
  • 본 논문에서는 순환적인 검색공간과 장애물이 존재하는 검색공간에서 객체들을 클러스터링할 때 고려해야하는 CCD(Clustering with Circular Distance) 문제와 COD(Clustering with Obstructed Distance) 문제를 연구하였다. 그리고 다차원 검색공간에서 삽입이나 삭제가 빈번히 발생하는 객체들을 효율적으로 클러스터링하기 위한 새로운 클러스터링 알고리즘을 제안하였다. 제안한 클러스터링 알고리즘에는 CCD 및 COD 문제를 해결하기 위한 거리 함수가 정의된다. 그리고 최소의 연산 시간으로 높은 공간 국부성을 갖는 클러스터들을 생성하기 위한 클러스터링 방법이 포함된다.

비행 시뮬레이션을 이용한 소형 무인항공기의 최소 분리 거리 산출 (Minimum Separation Distance Calculation for Small Unmanned Aerial Vehicles using Flight Simulation)

  • 한 준 영
    • 한국항행학회논문지
    • /
    • 제28권1호
    • /
    • pp.15-20
    • /
    • 2024
  • 소형 무인항공기의 활용 분야가 군사용 및 민수용으로 확장됨에 따라 운용 안전성 및 공역의 경제 효율적 이용을 위한 연구의 필요성이 증가하였다. 본 연구에서는 저고도에서 비행하는 소형 무인항공기의 안전 운용을 위한 최소 분리 거리 산출을 수행하였다. 최소 분리 거리 산출에는 소형 무인항공기의 총 시스템 오차 분석이 필요하므로 민감도 분석을 통해 비행 기술 오차 요인을 선별하였다. 소형 무인항공기의 비행 데이터는 실제 소형 무인항공기의 비행 제어기와 비행 시뮬레이션 프로그램을 연동하여 획득하였다. 이를 기반으로 소형 무인항공기의 운용 시나리오를 설정하고 각 시나리오의 최소 분리 거리를 산출하였다. 이를 통해 실제 무인 소형 무인항공기의 안전 운용에 필요한 최소 분리 거리 산출치의 활용 방법을 제시하였다.

액막류의 MHF 점에 관한 실험적 연구 (Experimental Study on Minimum Heat Flux Point of Liquid Film Flow)

  • 김영찬
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2001년도 춘계학술대회논문집D
    • /
    • pp.208-213
    • /
    • 2001
  • The minimum heat flux conditions are experimentally investigated for the subcooled liquid film flow on the horizontal plate. The experimental results show that the minimum heat flux point temperature becomes higher with the increase of the velocity and the subcooling of the liquid film flow. However, the effect of distance from the leading edge of the heat transfer plate on the minimum heat flux is almost negligible. Also, the experimental results show that the propagation velocity of wetting front increase with increasing the velocity and the subcooling of the liquid film flow.

  • PDF