• Journal of Power Electronics
• /
• 제15권2호
• /
• pp.338-345
• /
• 2015

The time-optimal control for boost converters can achieve the minimum recovery time. However, their output voltage deviation is quite large. Since the minimum output voltage deviation and minimum recovery time cannot be obtained at the same time, a novel energy control is proposed to achieve a superior tradeoff between them in this paper. The peak value of the inductor current can be decreased as well. Its control parameter is easy to choose. When compared with the conventional control methods, the proposed control shows a better dynamic performance. Experimental results, which are in agreement with the theoretical analysis, are provided to verify the proposed control method.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.584-597
• /
• 2016

This paper focuses on an improvement in the transient performance of Boost converters when the load changes abruptly. This is achieved on the basis of the nature trajectory in Boost converters. Three key aspects of the transient performance are analyzed including the storage energy change law in the inductors and capacitors of converters during the transient process, the ideal minimum voltage deviation in the transient process, and the minimum voltage deviation control trajectory. The changing relationship curve between the voltage deviation and the recovery time is depicted through analysis and simulations when the load suddenly increases. In addition, the relationship curve between the current fluctuation and the recovery time is obtained when the load suddenly decreases. Considering the aspects of an increasing and decreasing load, this paper proposes the transient performance synthetic optimized trajectory and control laws. Through simulation and experimental results, the transient performances are compared with the other typical three control methods, and the ability of proposed synthetic trajectory and control law to achieve optimal transient performance is verified.

• 제어로봇시스템학회논문지
• /
• 제15권6호
• /
• pp.634-640
• /
• 2009

The plate manufacturing processes are composed of the reheating furnace, finishing mill, cooling process and hot leveling. The finishing rolling mill (FM) as a reversing mill has produced the plate steel through multiple pass rolling. The automatic gauge control (AGC) is employed to maintain the thickness tolerance. The high grade products are forming greater parts of the manufacturing and customers are requiring strict thickness margin. For this reason, the advanced AGC method is required instead of the conventional AGC based on the PI control. To overcome the slow response performance of the conventional AGC and the thickness measurement delay, a fuzzy AGC based on the thickness deviation and its trend is proposed in this paper. An embedded controller with the fuzzy AGC has been developed and implemented at the plate mill in POSCO. The fuzzy AGC has dynamically controlled the roll gap in real time with the programmable logic controller (PLC). On line tests have been performed for the general and TMCP products. As the results, the thickness deviation range (maximum - minimum of the inner plate) is averagely from 0.3 to 0.1 mm over the full length. The fuzzy AGC has improved thickness deviation and completely satisfied customer needs.

• 대한전기학회논문지
• /
• 제35권9호
• /
• pp.380-387
• /
• 1986

We have developed a dual control algorithm by means of innovations approach and established the stability of dual by introducing the pole-placement method suggested by Berger on the non-dual control. The dual controller realizing this algorithm decreases control loss sharply when compared with that of a non-dual controller, and shows the characteristics of suppressing the output deviation in transient state effectively. The total control energy and the accumulated square misdistance of this dual controller are shown to be 1-10% and 0.1-10% of those of CE control, respectively. Consequently this controller solves the non-minimum phase problem encountered when discretizing the system equation, and can be used to overcome the uncertainty of system effectively by adjusting the learning rate of the controller.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2001년도 ICCAS
• /
• pp.30.6-30
• /
• 2001

We build near minimum-time trajectory planning algorithm for Wheeled mobile robots (WMRs) With Piece-Wise Constant control voltages satisfying i) initial and final postures and velocities as well as ii) voltage constraints We consider trajectory planning problem for cornering motion with a path-deviation requirement for obstacle avoidance. We divide our trajectory planning algorithm for cornering motion into five ordered sections: translational, transient, rotational, transient, and translational sections. Transforming dynamics into uncorrelated form with respect to translational and rotational velocities, we can make controls for translation/rotational velocities to be independent. By planning each section with constant voltages, and integrating five sections with adjustment of numbers of steps, the overall trajectory is planned. The performance is very close to the minimum-time solution, which is validated via simulation studies.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1994년도 Proceedings of the Korea Automatic Control Conference, 9th (KACC) ; Taejeon, Korea; 17-20 Oct. 1994
• /
• pp.676-680
• /
• 1994

Three synchronic variables (Deviation Time, Fairness Time, Synchronic Time) are defined for Timed Place Petri Nets (TPPN). These parameters show the dependency between the firing of transition subsets in the time domain by different values. The approaches in this paper can be used to find synchronic relations in Stochastic Petri Nets. This paper presents how to decide the minimum resources required to a Flexible Manufacturing Cell using Synchronic Time concept.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.16-16
• /
• 2000

This paper describes a new structure re create a pseudo Gaussian function network (PGFN). The activation function of hidden layer does not necessarily have to be symmetric with respect to center. To give the flexibility of the network, the deviation of pseudo Gaussian function is changed according to a direction of given input. This property helps that given function can be described effectively with a minimum number of center by PGFN, The distribution of deviation is represented by level set method and also the loaming of deviation is adjusted based on it. To demonstrate the performance of the proposed network, general problem of function estimation is treated here. The representation problem of continuous functions defined over two-dimensional input space is solved.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1991년도 하계학술대회 논문집
• /
• pp.375-378
• /
• 1991

This paper presents a design method of synchronous generator excitation controller using self-tuning PID algorithm. Controller parameter is determined by using adaptive control theory in order to maintain optimal operation of generator under the various operating conditions. To determine the optimal parameter of controller. minimum variance algorithm using the recursive leastsquare(RLS) indentification method is adopted and the difference between the speed deviation with weighted factor and voltage deviation is used as the input signal of adaptive controller, which provides good damping and conversion characteristics. The results tested on a single machine infinite bus system verify that the proposed controller has better dynamic performances than conventional controller.

• 한국정보전자통신기술학회논문지
• /
• 제2권4호
• /
• pp.29-36
• /
• 2009

본 논문은 버스에 사용되는 연소식 프리히터(Fuel Fired Heater) 퍼지 제어기(Fuzzy controller)를 설계하였다. 프리 히터는 얼마나 빠른 시간 안에 설정한 온도에 다다르는지와 공간내의 온도 편차가 얼마나 작게 발생하는지의 두 가지가 가장 중요한 요소이다. 기존의 연소식 프리히터의 온도 제어 방식으로 사용된 PI 제어기의 온도편차를 줄임과 동시에 응답특성을 개선한 퍼지 제어기를 설계하여 그 성능을 평가하였다. 설계된 퍼지 제어기에서 온도를 설정하면 기존의 PI 제어방식에서는 $25^{\circ}C$의 도달시간이 12분 소요되었으나 퍼지 제어방식에서는 9분 20초 소요되어 기존의 제어기보다 퍼지제어기가 2분 40초의 빠른 응답 성능으로 향상됨을 확인하였다. 난방의 온도 편차에서도 기존의 PI 제어 방식에서는 $2.4^{\circ}C$의 편차를 보인 반면 설계된 퍼지 제어기에서는 $1.6^{\circ}C$로 온도 편차 또한 개선되었음을 확인하였다.

• 응용통계연구
• /
• 제21권2호
• /
• pp.247-264
• /
• 2008

통합공정관리의 기본절차는 잡음이 내재하는 공정에 대하여 수정조치를 취하고, 수정활동 중 공정에 이상원인이 발생하면 관리도를 통하여 발생을 탐지하고 교정활동을 통하여 이를 제거하게 된다. 그러나 공정의 교정활동은 많은 시간과 비용을 수반하는 비생산적 요인을 유발할 수 있기 때문에 무조건적 교정활동은 생산성을 저하시키는 반대 급부도 동시에 내포하고 있다. 이 논문에서는 공정모형으로 ARIMA(0,1,1) 모형을 가정하고 공정 평균과 분산에 이상원인이 발생하는 경우 이를 탐지하는 절차를 소개하고, 이상신호의 시점에서 공정 잔여시간 동안 발생할 수 있는 미래손실에 기초하여 교정 활동의 여부를 판단하는 통합공정관리 절차를 제안한다.