• Journal of Communications and Networks
• /
• v.6 no.4
• /
• pp.331-342
• /
• 2004

We study the problem of controlling data overhead of mesh-based multicast ad hoc routing protocols by adaptively adding redundancy to the minimal data overhead multicast mesh as required by the network conditions. We show that the computation of the minimal data overhead multicast mesh is NP-complete, and we propose an heuristic approximation algorithm inspired on epidemic algorithms. In addition, we propose a mobility-aware and adaptive mesh construction algorithm based on a probabilistic path selection being able to adapt the reliability of the multicast mesh to the mobility of the network. Our simulation results show that the proposed approach, when implemented into ODMRP, is able to offer similar performance results and a lower average latency while reducing data overhead between 25 to 50% compared to the original ODMRP.

• Journal of the Korean Society of Safety
• /
• v.17 no.1
• /
• pp.87-93
• /
• 2002

In this thesis using FTA technique, the author proposes a new method of analysis of some accidents in construction work. Some efficient plans of safe facility investment are made out. For this study, I referred to 'The Death Accident in Construction Works', which have been published by Korea Industrial Safety Corporation from 1993 to 1999 for 6 years. I selected some of apartment constructions which have caused many deaths for the purpose of analysis in the study. I found that the concrete work using ferro-deck takes more deaths than the conventional construction. After finding this, I selected GANG FORM works using ferro-concrete which is the most widely used but causes many accidents. On the basis of the classification, I try to do some quantitative analyses by adding the death frequency and material factors. In order to draw up the most efficient investment plan, it is imperative that FT diagram be made out and that factors. In order to draw up the most efficient investment plan, it is imperative that FT diagram be made out and that minimal Cut Set be needed. It requires a great deal to labor and time to get Minimal Cut Set. The Minimal Cut Set which is formed of these process is the main factor to analyze disaster in the work. It is desirable that we add calculated percentage of accidents to these factors to these factors in value order, that is to say, from the high cost to low cost.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2004.11a
• /
• pp.170-173
• /
• 2004

The law about floor impact sound goes into effect from March 23th in 2004 and is applying to new designs. According to the new law, the minimal of slab thickness is 180mm by standard floor structure and the new law presents about the minimal standard about heavy-weight impact sound. Also, It presents about classification of light-weight sound separate the minimal standard, so demand of consumers can be accepted. But a working plan of classification about light-weight sound is not presented in accordance with field test, so the problem that design can't be achieved although the aim of design is formed. This study shows contents to investigate for working of classification and will be helpful to designers and construction corporations.

• Korean Institute of Interior Design Journal
• /
• no.14
• /
• pp.121-129
• /
• 1998

It opposition to visual luxury of Post modern Architecture a new tendency characterized as 'simplicity' emerged in architecture. It seems clear that such a tendency so called Minimal Architecture has risen as a reaction to the surfeit of sign and the mixture of languages generated by postmodernism. This new simplicity is also related to the tradition of Modern Architecture and the Minimal Art Movement is 1960's. They adopted simple is also related to the tradition of Modern Architecture and the Minimal Art Movement is 1960's. They adopted simple primary Volume to avoid the main fluence on the already chaotic urban environment As a result a strong monumentality is achieved. The main interests for 'minimal' architects seem to be the making of simple structure and the repetition of modular elements to achieve an economic and efficient construction method. Transparent and honest expression is preferred instead of attaching another ornament skin on to the skeleton of the architecture.

• Journal for History of Mathematics
• /
• v.18 no.4
• /
• pp.113-124
• /
• 2005

For a Tychonoff space X, C(X) is a Riesz-space. It is well known that C(X) is order-Cauchy complete if and only if X is a quasi~F space and that if X is a compact space and QF(X) is a minimal quasi-F cover of X, then the order- Cauchy completion of C(X) is isomorphic to C(QF(X)). In this paper, we investigate motivations and historical backgrounds of the definition for quasi-spaces and the construction for minimal quasi-F covers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.479-482
• /
• 2022

Recently, various artificial intelligence technologies are being applied to smart factory, finance, healthcare, and so on. When handling data requiring protection of privacy, distributed learning techniques are used. For distribution of information with privacy protection, encoding private information is required. Minimal codes has been used in such a secret-sharing scheme. In this paper, we explain the relationship between the characteristics of the minimal codes for application in distributed systems. We briefly deals with previously known construction methods, and presents extension methods for minimal codes. The new codes provide flexibility in distribution of private information. Furthermore, we discuss application scenarios for the extended codes.

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.73-73
• /
• 2005

• Structural Engineering and Mechanics
• /
• v.71 no.3
• /
• pp.283-290
• /
• 2019

In global competition manufacturing companies have to produce modern, new constructions from advanced materials in order to increase competitiveness. The aim of my research was to develop a new composite cellular plate structure, which can be primarily used for structural elements of road, rail, water and air transport vehicles (e.g. vehicle bodies, ship floors). The new structure is novel and innovative, because all materials of the components of the newly developed structure are composites (laminated Carbon Fiber Reinforced Plastic (CFRP) deck plates with pultruded Glass Fiber Reinforced Plastic (GFRP) stiffeners), furthermore combines the characteristics of sandwich and cellular plate structures. The material of the structure is much more advantageous than traditional steel materials, due mainly to its low density, resulting in weight savings, causing lower fuel consumption and less environmental damage. In the study the optimal construction of a given geometry of a structural element of a road truck trailer body was defined by single- and multi-objective optimization (minimal cost and weight). During the single-objective optimization the Flexible Tolerance Optimization method, while during the multi-objective optimization the Particle Swarm Optimization method were used. Seven design constraints were considered: maximum deflection of the structure, buckling of the composite plates, buckling of the stiffeners, stress in the composite plates, stress in the stiffeners, eigenfrequency of the structure, size constraint for design variables. It was confirmed that the developed structure can be used principally as structural elements of transport vehicles and unit load devices (containers) and can be applied also in building construction.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.9
• /
• pp.65-70
• /
• 2015

Minimal line length enables low-cost construction of the transmission lines and low-loss transportation of electric power. This paper presents a derivation to determine the coordinate and length of the straight line that minimally connects two perpendicular lines x-axis and y-axis via a specific point, using the optimization technique. The author shows a formula to obtain the minimal length, which is represented by the cube root of the coordinate given by the specific point. Case studies have been also discussed to prove the optimal solutions derived by the proposed formula.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.4
• /
• pp.358-364
• /
• 1999

The auxiliary transformers or start-up/stand-by transformer(s) are installed against the start-up and shut-down of generator and emergency status in fossil power plant. The on-site power supply configuration using these transformers must be determined, considering configuration requirements, site characteristics, reliability and availability severely because it is remarkably important for safety and ecfonomy of plant. The auxiliary or start-up/stand-by power supply configuration has been determined considering only safety requirements and construction cost until now in Korea. This paper presents general theorems for the reliability estimation and proposes 2-unit based 4 alternatives for the start-up power supply stystem of 500㎿ standardized fossil power plant. The reliability and unavailability of equipment, system and configuration are determined using minimal cut-set methodology. The optimized plan of 4 alternatives is determined based on this ultimate reliability and unavailability.