• 한국전자통신학회논문지
• /
• 제5권6호
• /
• pp.620-624
• /
• 2010

본 논문에서는 전송선로 각 구간에 다르게 할당된 임피던스와 전기적 길이를 조절함으로써 점차 소형화 추세에 있는 UWB 시스템에 이용될 수 있는 초광대역 대역통과 필터를 설계 제작하였다. 제안된 초광대역 대역통과 필터는 Agilent사의 ADS2008 Momentum와 Ansoft사의 HFSS 10을 이용하여 최적 설계하였고, 제작된 초광대역 대역통과 필터는 3.1 [GHz]~10.6 [GHz]의 통과대역을 가지며 8.3 [GHz]에서 삽입 손실이 0.39 [dB] 이며, 반사 손실은 9.37 [GHz]에서 12.394 [dB]의 특성을 나타내었다.

• 전기화학회지
• /
• 제10권2호
• /
• pp.104-109
• /
• 2007

연료 전지의 소형화를 위하여 흑연(graphite)를 기본으로 하는 분리판을 실리콘분리판으로 대체하였으며, 실리콘 분리판과 active area가 $4cm^2$인 MEA (membrane electrode assembly)와 결합하여 단위 전지를 제작하였다. 단위 전지에 공급되는 수소와 산소의 공급량은 고정하고 가습기의 구동 온도만을 변화시키면서 단위 전지의 성능을 확인하고 최적의 가습 조건을 결정하였다. 또한 가습 조건이 실리콘으로 제작된 연료 전지 스택에 미치는 영향을 알아보기 위하여 실리콘 분리판과 2개의 MEA로 이루어진 스택을 제작하여 가습 조건의 영향을 알아보고 실리콘 분리판으로 제작된 연료전지 스택의 문제점 및 특징을 알아보았다.

• 한국자동차공학회논문집
• /
• 제22권2호
• /
• pp.190-196
• /
• 2014

Exhaust system by reinforcement of environment regulation came to the foe study necessity. And Exhaust system has necessary to increase the engine performance and silence. From this cause, Automobile has significantly considered production expense. this study makes process for checking the characteristics about Exhaust variable valve within muffler. Variable valve might reduce the baffle within muffler, It was possible to remove the front muffler. Therefor, To miniaturize a size of muffler might be increased by performance through cost-cutting effect and controling of back pressure. Because the Study on Variable valve installed within muffler, to measure the real data was hardly resulted one of the assignments. From manufactured conduct device, might measure data one of piece which was up-graded of problem. Considering to these point, stressed pressure distribution has analyzed on cross section, floating characteristics about velocity distribution around variable valve using analysis as computational fluid dynamics of Ansys with completed measurement data.

• 한국생산제조학회지
• /
• 제21권3호
• /
• pp.362-367
• /
• 2012

Though a micro pump is a crucial element in miniaturized bio-fluidic systems or drug delivery systems, most of the conventional micro pumps still have some limitations to miniaturize their controller system and to obtain the sufficient back pressure which can rise over the inner pressure of human body or experimental animals. In this paper, to overcome these limitation, a new PZT disc and its controller were designed and fabricated to get the sufficient flowrate and the back pressure with guaranteeing embeddability of the controller into pumping body. The amplitudes of the disc deflections were as large as 40 ${\mu}m$ at 200 V - 100 Hz condition. As results of experiments, the flow rate and the back pressure increase when the frequency increases. The obtainable maximum flow rate and back pressure are 5.2 ml/min at 95 Hz and 13.14 kPa at 90 Hz respectively.

• 대한의용생체공학회:의공학회지
• /
• 제26권3호
• /
• pp.163-169
• /
• 2005

Respiratory tubes with a length of 35mm and diameters of 10, 15, and 20mm were made for experimental purpose, and both the static$(P_s)\;and\;dynamic(P_D)$ pressures were simultaneously measured for steady flow rates ranging 1-12//sec. Least squares analysis resulted successful fitting of $P_s\;and\;P_D$ data with quadratic equations with correlation coefficients higher than 0.99(P<0.0001). The spirometric measurement standards of the American Thoracic Society(ATS) were applied to $P_s$ data, which demonstrated the smallest tube diameter of 15mm to satisfy the ATS standards. The maximum $P_D$ value of the velocity type transducer(the functional single use respiratory air flow tube) with the diameter of 15mm was estimated to be approximately $75cmH_2O$, implying more than 7 times larger sensitivity than the widely used pneumotachometers. These results showed that the velocity type respiratory air flow transducer is a unique device accomplishing miniaturization with the sensitivity increased, thus would be of great advantage to develop portable medical devices.

• 인터넷정보학회논문지
• /
• 제18권6호
• /
• pp.15-23
• /
• 2017

Wireless power transmission (WPT) for wireless charging is currently attracting much attention as a promising approach to miniaturize batteries and increase the maximum total range of an electric vehicle. The main advantage of the laser power beam (LPB) approach is its high power transmission efficiency (PTE) over long distance. In this paper, we present the design of a laser power beam based WPT system, which has a best WPT channel selection technique at the receiver end when multiple power transmitters and single power receiver are operated simultaneously. The transmitters send their transmission channel information via optically modulated laser pulses. The receiver uses the received signal strength indicator and digitized data to choose an optimum power transmission path. We modeled a vertical multi-junction photovoltaic cell array, and conducted an experiment and simulation to test the feasibility of this system. From the experimental result, the standard deviation between the mathematical model and the measured values of normalized energy distribution is 0.0052. The error between the mathematical model and measured values are acceptable, thus the validity of the model is verified.

• 한국전자파학회논문지
• /
• 제27권12호
• /
• pp.1027-1035
• /
• 2016

본 논문에서는 VHF 대역의 능동 위상 배열 안테나에 사용하기 위한 복사소자를 소형화하는 방안에 대해 연구하였다. 이를 위하여 미엔더 라인을 갖는 다이폴 안테나를 사다리꼴 모양으로 설계하여 성능 열화는 최소화하면서 다이폴 안테나 길이를 소형화하였다. 또한, 그리드 반사기를 사용하여 지향성을 향상시키고, 외부환경에 둔감하도록 하였으며, 배열 안테나에 적용하기 위한 구조로 설계하였다. 제작된 안테나는 VSWR 2:1 기준으로 약 9.1 %의 대역폭을 가지며, 4.24 dBi의 최대 이득을 갖는다. 그리고, 전후방비(FBR)는 15 dB 이상의 양호한 특성을 나타내었다.

• 전기학회논문지
• /
• 제59권7호
• /
• pp.1199-1205
• /
• 2010

The recent power system is required to a large size of facilities and high power technology according to increasing power demand. However, it could lead to spoiling the beauty of city and environment problem. The miniaturized facilities with large capacity such as GIS have been required in recent power system. The GIS(Gas Insulated Substation) using the SF6 insulation gas enables to miniaturize facilities with large capacity with high insulation performance. However, the substation installed GIS has required to new design model which is different from the conventional substation. The TRV(Transient Recovery Voltage) analysis on simple circuit may applied by differential equation. However, in case of relatively complicated system, EMTP(Electro Magnetic Transients Program) mainly has been used to design and simulate for transient analysis. This paper mainly design the 22.9 kV GIS system and analyze the transient recovery voltage of main circuit breaker using EMTP/RV. It also enables to easily design the other substation installed GIS with same maker and voltage level because the proposed GIS model consists of separated modules such as busbar, circuit breaker, bushing, CT, PT etc. Eventually, it contributes to comfortably compare the interrupting performance of circuit breaker and system TRV corresponding to the substation system configuration.

• 대한전자공학회논문지TC
• /
• 제44권12호
• /
• pp.1-7
• /
• 2007

본 논문에서는 WLAN(902MHz-928MHz)용 대역통과 여파기의 소형화와 향상된 차단대역 저지특성을 구현하기 위하여, 기존의 Right-Handed 전송선이 Left-Handed 특성을 가미한 복합구조를 이용하여 설계하였다. 대역통과 여파기의 unbalanced형 복합구조의 0차 공진기의 공진점을 사용하고 공진기간의 결합을 간편한 인버터 이론으로써 구현하였다. 제안된 기법의 타당성은 예측특성과 실험결과로써 확인되며, 평행결합 선로형과 같은 기존의 대역통과 여파기 보다 65% 이상 소형화됨을 알 수 있었다.

• 한국통신학회논문지
• /
• 제36권7A호
• /
• pp.678-682
• /
• 2011

본 논문에서는 1~6GHz 대역에서 동작하는 소형 대수 주기 다이폴 배열 (LPDA: Log-periodic Dipole Array) 안테나에 관해 연구하였다. LPDA 안테나의 폭을 소형화하기 위해 역(inverted)-L 형태의 다이폴 소자를 사용하였고, 전체 길이를 줄이기 위해 각 다이폴 소자 간의 간격을 줄였다. 역-L 형태의 다이폴 소자의 top-loading 길이를 증가시킬수록 LPDA 안테나의 폭을 더 줄일 수 있으나, 대역폭과 이득은 상대적으로 감소함을 알 수 있었다. 최종 제작된 소형 LPDA 안테나는 FR4(비유전율 4.4, 두께 1.6 mm) 기판 상에 제작되었고, 표준 LPDA 안테나와 비교하여 폭이 32%, 길이가 49% 줄어들었다. 측정한 이득은 1~6GHz 대역에서 1~3.1 dBi 범위에 있다.