• Journal of the Mineralogical Society of Korea
• /
• v.31 no.1
• /
• pp.57-65
• /
• 2018

The geology of Hidalgo state in Mexico is formed by a Precambrian metamorphic rock base which discordantly supports a strong Paleozoic sedimentary rock sequence. Triassic-Jurassic and Cretaceous sedimentary rocks overlie the above-mentioned rocks at a discordant angle. These Mesozoic rocks are in turn covered by a Cenozoic structure which is marine at its base. At the top, the structure changes to andesitic and basaltic composition volcanic rocks. And, a great variety of mineral deposits, both metallic and nonmetallic, is present in Hidalgo state. The host rocks of these deposits are also very varied in age from Mesozoic to Tertiary. Mineralization age corresponds to Tertiary in 90% of the area. Hidalgo state occupies as an important place in national silver and manganese production. Main mineral deposits correspond to argentiferous veins hosted in sedimentary rocks. Following in order of importance are lead and zinc, as well as some small iron deposits. There is evidence of tin and molybdenum mineralization, but these deposits have not been exploited because of their low grade and volume. And, Hidalgo state has different types of nonmetallic mineral deposits such as sedimentary, hydrothermal, metamorphic and volcanic origins.

• Geophysics and Geophysical Exploration
• /
• v.24 no.3
• /
• pp.73-77
• /
• 2021

Induced polarization (IP) is useful for mineral exploration and hydrogeological studies by visualizing the electrochemical reactions at the interface between polarized minerals and groundwater. Frequency-domain IP (FDIP) is not actively applied to field surveys because it takes longer to acquire data, despite its higher data quality than conventional time-domain IP. However, data quality is more important in current mineral exploration as the targets gradually shift to deep or low-grade ore bodies. In addition, the measurement time reduced by automated instrumentation increases the potential for FDIP field applications. Therefore, we demonstrate that FDIP can detect mineral exploration targets by performing geophysical logging in the boreholes of a skarn deposit, in South Korea. Alternating current (AC) resistivity, percent frequency effect (PFE) and metal factor (MF) were calculated from impedance values obtained at two different frequencies. Skarn zones containing magnetite or pyrite showed relatively low AC resistivity, high PFE, and high MF compared to other zones. Therefore, FDIP surveys are considered to be useful for mineral exploration.

• Journal of Soil and Groundwater Environment
• /
• v.17 no.1
• /
• pp.22-32
• /
• 2012

This study suggests a method to grade groundwater quality quantitatively using statistical approaches for evaluating the quality of groundwater in wells included in the Groundwater Quality Monitoring Network (GQMN). The proposed analysis method is applied to GQMN data from 2001 to 2008 for nitrate nitrogen, chloride, trichloroethylene, potential of hydrogen (pH), and electrical conductivity. The analysis results are obtained as groundwater quality grades of the groundwater representing each of the monitoring stations. The degree of groundwater contamination is analysed for water quality parameters, district, and usage. The results show that the degree of groundwater contamination is relatively high by nitrate nitrogen, bacteria and electrical conductivity and at Seoul, Incheon, Gwangju, Gyeonggido and Jeollado. The degree of contamination by nitrate nitrogen and trichloroethylene is especially high when the groundwater is used for agricultural and industrial water, respectively. It is evaluated that potable groudnwater in GQMN is significantly vulnerable to nitrate nitrogen and bacteria contamination.

• Economic and Environmental Geology
• /
• v.10 no.2
• /
• pp.67-74
• /
• 1977

Biggest talc deposits of South Korea, localized in Choong-Chung-Nam-do, are known as a products of hydrothermal metamorphism of serpentine. From studying mineral paragenesis and localization, three types of talc mineralization is presumed as follows: 1) Extended talc mineralization from autometamorphism (serpentinization) of ultra-basic igneous rocks, 2) Schistose talc rock as green schist facies of regional metamorphism and 3) Late hydrothermal mineralization and purification of serpentine and pre-existing low grade ores.

• Korean Journal of Microbiology
• /
• v.11 no.2
• /
• pp.69-78
• /
• 1973

In order to investigate the distribution of an iron-oxidizing bacterium, Ferrobacillus ferrooxidans in Korea, the authors had carried out the chemical and microbiological analysis of mine water. The results obtained were as follows : 1. Ferrobacillus ferrooxidans concerned to leaching was isolated from 10 copper mine water out of 46 sites in Korea. 2. As the results of bacterial oxidation, the contents of sulfuric acid, ferric sulphate and copper in the bacteria-bearing solutions were higher than those in bacteria-free solutions.

• Proceedings of the Korean Institute of Resources Recycling Conference
• /
• 2006.05a
• /
• pp.135-139
• /
• 2006

• Journal of the Mineralogical Society of Korea
• /
• v.23 no.4
• /
• pp.377-393
• /
• 2010

Pumiceous tuffs occurring in the Beomgockri Group are examined applied-mineralogical characteristics and their controling factors to evaluate their potentials as the adsorption-functional mineral resources. The pumiceous tuffs are diagenetically altered to low-grade zeolitcs and bentonites in the Janggi area. Compositional specialty due to the presence of pumice fragments induces the altered tuffs to exhibit the characteristic adsorption property combined with cation exchange capacity, specific surface area, and acidic pH. Unusual lower pH in the adsorption-functional mineral substances is turned out to be originated from the presence of H-smectite having $H^+$ in the interlayer site of the sheet structure. On account of disordered crystallinity resulting from the exchanged $H^+$ in the interlayer site, the smectite commonly forms crenulated edges in the planar crystal form and exhibits characteristic X-ray diffraction patterns showing comparatively lower intensities of basal spacings including (001) peak than conventional Ca-smectite. Based on the interpretation of paragenetic relations and precursor of the H-smectite, a genetic model of the peculiar clay mineral was proposed. The smectite formation may be facilitated resulting from the precipitation of opal-CT at decreasing pH condition caused by the release of H+ during diagenetic alteration of pumice fragments. Because of the acidic smectite, the low-grade mineral resources from the Beomgockri Group may be applicable to the adsorption industry as the raw materials of acid clays and bed-soil.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.2
• /
• pp.129-138
• /
• 2008

The characteristics of beneficiating kaolin mineral by liberation (selective grinding) and air classification have been investigated, comparing the grinding rates of ball mill and impact mill. The ore was ground using a ball mill and a impact mill to evaluate the grindability of the two grinding methods based on the constant production amount of fine particles in size less than 325 mesh. Then, the fine product was further separated into two fractions using an air-classifier and each fraction was chemically analyzed to compare the beneficiation efficiency of the two grinding methods. The chemical grade of kaolin mineral decreased as increasing the grinding rate of both the mills. particularly in the case of ball mill because of overgrinding impurities such as quartz and feldspar. In the case of the ball milling, the fine fraction less than 325 mesh was air-classified at a cutting point of $43\;{\mu}m$. The production rate of the air-classified concentrate was found to be 66.2 wt%, removing 5.3% of $Fe_2O_3$ and 34.6% of CaO. Under the same conditions mentioned above with the impact mill, the production rate of the air-classified concentrate was 64.4 wt%, removing 34.2% of $Fe_2O_3$, 67.6% of CaO and 25.0% of $TiO_2$. Therefore, our results indicate that impact mill is superior to ball mill in terms of impurity removal.

• Resources Recycling
• /
• v.19 no.2
• /
• pp.35-44
• /
• 2010

As the competition of acquiring foreign resources of advanced countries and developing countries intensifies, South Korea which imports most of the mineral resources, started to re-develop domestic mines for molybdenite ore, in order to secure stable natural resources and decrease foreign currency expense. In this study, as a result of performing XRD and composite analysis on Dongwon NMC's (the sole producer of molybdenite ore in Korea) final concentrate(Mo 50.4%), Quartz, Grossular and Hedenbergite exists as impurities and size analysis showed that in relative coarse particle range of 60~140 mesh was formed with high grade over 57% Mo. Also, a test was performed to confirm the possibilities of increasing the grade and recovery of Dong won NMC's final ore. As a result, Mo 58.6% ($MoS_2$ 97.83%) was obtained with 87.47% recovery at a condition of 15 minutes grinding time, Kerosene as collector 0.1 l/ton, AF as Frother 65 7.2 l/ton, wash water of 630 ml/min and air flow rate of 1,197 ml/min.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.397-413
• /
• 2008

In Gaya area, the Boseong kaolin deposits exhibit locally unusual occurrences such as downward enrichment of kaoin minerals, characteristic hydrothermal alterations (illite and stilbite), and phase relations among kaolin minerals in addition to the extensive weathering of anorthositic country rocks. This indicates that the kaolin deposits seem to be genetically formed as a mixed hydrothermal and residual model. The kaolin ores can be divided into five types on the basis of differences in occurrence, mineral composition and characters. These consist of two types of high-grade ores ranging above 80% in grade and low-grade ores as low as less than 80% including feldspar residuals or the peculiar impurity phase of illite-vermiculite-stilbite. Halloysite and kaolinite are mostly coexisted in the Boseong kaolin, and these kaolin minerals exhibit diverse appearances in crystallinity and morphology. Such a diversity in mineral phase and crystallinity seems to be originated from the complexity in genesis. In addition to these diverse characters of the kaolin, its applied-mineralogical characteristics such as chemical composition, thermal properties, whiteness, viscosity, and etc. made it disadvantageous in terms of ore quality.