• 한국생산제조학회지
• /
• 제20권6호
• /
• pp.817-823
• /
• 2011

This paper proposes a cooling stop temperature control(CST) and a phase transformation control(PTR) which aim at obtaining the uniform temperature and quality along the longitudinal direction of the high strength steel on the run-out table(ROT) process. The problems of the temperature control are analyzed for the conventional steel and the new control concepts are derived from a time-temperature transformation(TTT) diagram. The proposed control technologies are verified from the simulation results under the temperature prediction model by the heat transfer governing equation, and the temperature estimation simulator. It is shown through the field test of the hot strip mills that the phase transformation ratio of the high strength steel is considerably improved by the proposed temperature controls.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.364-367
• /
• 2007

Typical seamless tube production methods are an extrusion and a rotary tube piercing. The rotary piercing process is more competitive than the extrusion process form view point of productivity, quality, and flexibility. It consists of twin rolling mills, a pair of disc or flat guides, and a plug. Twin rolling mills are skewed with proper angles in two directions. A round billet is progressively fed forward and rotated due to the rotation of twin rolling mills. Internal crack initiation and growth at central area of the billet are gradually progress because of the repeating actions of tension and rotation. Design variables in the rotary piercing rolling process are the feed angle, the cross angle, the reduction ratio, and the position of plug. In this work, a rotary tube piercing machine was developed and parametric studies on design variables were carried out using finite element analysis. The Brozzo ductile fracture criterion was utilized to determine an internal crack initiation.

• KEPCO Journal on Electric Power and Energy
• /
• 제2권4호
• /
• pp.525-529
• /
• 2016

바이오매스 혼소는 신재생 에너지의 비중을 늘리면서 석탄화력발전에서의 $CO_2$ 배출을 저감할 수 있는 단중기적으로 가장 효과적인 방법이다. 본 논문에서는 이 중 기존 화력발전소에 가장 적은 초기투자비로 적용할 수 있는 직접 혼소법에 대하여 주로 고찰을 수행하고, 국내외 현황 및 전망에 대해 기술하였다. 직접 혼소법은 바이오매스 전용 미분기를 사용하여 혼소율을 늘리는 방법과 저 혼소율에서 초기투자비를 최소화하는 기존 석탄 미분기 사용 바이오매스 혼소법으로 나눌 수 있다. 유럽 및 미국에서는 혼소율을 높이기 위해 많은 상용발전소에서 바이오매스 전용 미분기를 사용하여 10~20% 가량의 혼소율(열량 기준)로 운전을 수행하고 있으나, 국내의 경우에는 RPS 대응을 위해 3~5% 가량의 혼소율에서 기존 석탄 미분기를 그대로 사용하여 바이오매스 혼소를 수행하고 있다. 신기후체제가 시작되고 석탄화력발전에서의 $CO_2$ 저감 요구가 점점 더 증대될 것으로 예상되는 바, 향후 바이오매스 고혼소율이 수행될 수 있는 기술적/저책적 방안이 모색되어야 하며, 이 경우 발생할 수 있는 설비에의 악영향을 면밀히 고려한 연료 표준화 및 전처리 기술이 개발되어야 한다.

• Journal of the Korean Statistical Society
• /
• 제36권3호
• /
• pp.411-421
• /
• 2007

The recent work by the authors (see, Withers, 1999; Withers and McGavin, 2006; Withers and Nadarajah, 2006) provided new expressions for repeated upper tail integrals of the univariate normal density and so also for the general Hermite function. Here we derive new expressions for repeated lower tail integrals of the same. The calculations involve the use of Moran's L-function and the Airy function. In particular, the Hermite functions are expressed in terms of Moran's L-function and vice versa.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.353-354
• /
• 2009

시멘트 결합재로 널리 사용되어지고 있는 고로 수쇄 슬래그 분말을 각종 분쇄기를 사용하여 입도별로 분쇄하고, 이를 혼합하여 충전률과 유동특성을 비교 분석하였으며, 입도분포 또한 비교분석 하였다. 충전률과 유동특성은 비례의 경향이 크게 나타났고, 입도분포가 넓을수록 유동특성은 높았다.

• 펄프종이기술
• /
• 제33권3호
• /
• pp.1-8
• /
• 2001

Paper consists of fiber network and paper properties were highly affected by fiber characteristics. Many researchers have tried to relate fiber and paper properties. Softwood and hardwood fiber's are quite different in their properties. Generally, softwood fiber's are longer and more flexible than hardwood fibers. At present, many paper mills make mixed paper with softwood and hardwood fibers except for special grade. During fracture some fiber's are broken and others are pulled out. In this paper, the number of broken and pulled out fiber's during fracture is analyzed depending on the mixing ratio of softwood and hardwood fiber's. Fiber length, curl, kink, coarseness, WRV and formation index were measured. Double-edged strength samples were prepared to observe the number of broken and pulled out fiber's. Mixed paper strength was decreased with increasing hardwood fibers ratio. During fracture, softwood fiber's were more likely broken and hardwood fibers were more likely pulled out. The strength of paper which consists of softwood fibers was determined by fiber's broken strength and that of hardwood fibers by fiber's debonding strength. Paper strength was changed depending on the fiber's bonding capability. If the fiber is longer and more flexible, the fiber network becomes stronger and stiffer.

• Asian-Australasian Journal of Animal Sciences
• /
• 제25권6호
• /
• pp.845-851
• /
• 2012

To elucidate the relationship between the arachidonic acid (AA) content and the taste of broiler meat, the effects of AA-enriched oil (AAO) supplements on the fatty acid content and sensory perceptions of thigh meat were evaluated. Four types of oil, including corn oil (CO), a 1:1 mixture of AAO and palm oil (PO) (1/2 AAO), a 1:3 mixture of AAO and PO (1/4 AAO), and a 1:7 mixture of AAO and PO (1/8 AAO) were prepared. Each type of oil was mixed with silicate at a ratio of 7:3, and added to the diet at a final proportion of 5% of fresh matter. Broiler chickens were fed these diets for 1 wk before slaughter. In thigh meat, the AA content of the 1/2 and 1/4 AAO groups was significantly higher than that of the CO group. The AA content in thigh meat (y, mg/g) increased linearly with increasing dietary AAO content (x, g/100 g of diet), according to the equation y = 0.5674+0.4596x ($r^2$ = 0.8454). The content of other fatty acids was not significantly different among the 4 diet groups. Sensory evaluation showed that the flavor intensity, umami (L-glutamate taste), kokumi (continuity, mouthfulness, and thickness), and aftertaste of the 1/2 and 1/4 AAO groups were significantly higher than that of the CO group. There were significant positive correlations between AA content in thigh meat and the flavor intensity, total taste intensity, umami, and aftertaste. These data suggest that the taste of broiler meat can be improved by the amount of dietary AA supplementation.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1543-1549
• /
• 2012

이 논문은 냉간 압연공정의 다단 압연기에서 각 롤 간의 슬립 현상에 대한 상태공간 모델을 도출하고, 이를 이용하여 롤 간 슬립 상태 관측기 설계에 관한 연구를 수행한다. 먼저 뉴튼의 운동법칙을 이용하여 각 롤들의 회전 운동 방정식을 1계 비선형 미분 방정식으로 기술한 후, 테일러 급수를 이용하여 임의의 동작점에서 상태공간 방정식으로 선형화한다. 다음에는 선형화된 상태공간 방정식에 기초하여 Gopinath 구성법으로 측정 가능한 구동 롤을 제외한 종동 롤의 회전 각속도를 추정하는 최소차원 상태 관측기를 설계한다. 마지막으로 컴퓨터 시뮬레이션을 통하여 상태 관측기로부터 추정된 각 롤 회전각속도와 슬립률의 유용성을 고찰한다.

• Nuclear Engineering and Technology
• /
• 제37권1호
• /
• pp.91-100
• /
• 2005

Kyung-hee Thorium Fuel (KTF), a heterogeneous thorium-based seed and blanket design concept for pressurized light water reactors, is being studied as an alternative to enhance proliferation resistance and fuel cycle economics of PWRs. The proliferation resistance characteristics of the KTF assembly design were evaluated through parametric studies using neutronic performance indices such as Bare Critical Mass (BCM), Spontaneous Neutron Source rate (SNS), Thermal Generation rate (TG), and Radio-Toxicity. Also, Fissile Economic Index (FEI), a new index for gauging fuel cycle economy, was suggested and applied to optimize the KTF design. A core loaded with optimized KTF assemblies with a seed-to-blanket ratio of 1: 1 was tested at the Korea Next Generation Reactor (KNGR), ARP-1400. Core design characteristics for cycle length, power distribution, and power peaking were evaluated by HELIOS and MASTER code systems for nine reload cycles. The core calculation results show that the KTF assembly design has nearly the same neutronic performance as those of a conventional $UO_2$ fuel assembly. However, the power peaking factor is relatively higher than that of conventional PWRs as the maximum Fq is 2.69 at the M$9^{th}$ equilibrium cycle while the design limit is 2.58. In order to assess the economic potential of a heterogeneous thorium fuel core, the front-end fuel cycle costs as well as the spent fuel disposal costs were compared with those of a reference PWR fueled with $UO_2$. In the case of comprising back-end fuel cycle cost, the fuel cycle cost of APR-1400 with a KTF assembly is 4.99 mills/KWe-yr, which is lower than that (5.23 mills/KWe-yr) of a conventional PWR. Proliferation resistance potential, BCM, SNS, and TG of a heterogeneous thorium-fueled core are much higher than those of the $UO_2$ core. The once-through fuel cycle application of heterogeneous thorium fuel assemblies demonstrated good competitiveness relative to $UO_2$ in terms of economics.

• 제어로봇시스템학회논문지
• /
• 제14권2호
• /
• pp.191-196
• /
• 2008

This paper proposes a cooling stop temperature control(CSTC) concept which aims at obtaining the uniform temperature and quality of the material along the longitudinal and lateral direction of the strip. The CSTC is designed using the experimental CCT(Continuous Cooling Transformation), TTT(Time Temperature Transformation) curves and the temperature control model by the heat transfer governing equation, and the temperature control simulator. The cooling pattern and the rolling speed can be solved by the CSTC. It is shown through the field test of the hot strip mill of POSCO that the phase transformation ratio of the high carbon steel is considerably improved by the proposed temperature control.