• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.69-73
• /
• 2002

We have designed and fabricated a low-cost, V-band CPW receiver chip set using GaAs PHEMT technology for the application of millimeter-wave wireless communication systems. Low noise amplifiers and down-converters were developed for this chip set. The fabricated low noise amplifier showed an S$\sub$21/ gain of 14.9 ㏈ at 60 ㎓ and a noise figure of 4.1 ㏈ at 52 ㎓. The down-converter exhibited a high conversion gain of 2 ㏈ at the low LO Power of 0 ㏈m. This work demonstrates that the GaAs PHEMT technology is a viable low-cost solution for V-band applications.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2005년도 추계종합학술대회
• /
• pp.765-768
• /
• 2005

In this paper, high LO-RF isolation 94 GHz MMIC single-balanced mixer was designed and fabricated using a branch line coupler and a ${\lambda}/4$ transmission line. The 94 GHz MMIC single-balanced mixer was designed using the 0.1 ${\mu}m$ InGaAs/InAlAs/GaAs Metamorphic HEMT(MHEMT) diode. The fabricated MHEMT was obtained the cut-off frequency($f_T$) of 189 GHz and the maximum oscillation frequency($f_{max}$) of 334 GHz. The designed MMIC single-balanced mixer was fabricated using 0.1 ${\mu}m$ MHEMT MMIC process. From the measurement, the conversion loss of the single-balanced mixer was 23.1 dB at an LO power of 10 dBm. The LO-RF isolations of single-balanced mixer was obtained 45.5 dB at 94.19 GHz. We obtained in this study a higher LO-RF isolation compared to some other balanced mixers in millimeter-wave frequencies.

• 대한전자공학회논문지TC
• /
• 제47권2호
• /
• pp.67-73
• /
• 2010

반사판을 이용하여 은닉물체 탐지에 적용이 가능한 밀리미터파 수동 이미징 시스템을 제작 하였다. 94GHz 중심주파수 대역에서 밀리미터파 센서와 밀리미터파 신호를 집속하기 위한 렌즈 및 반사판을 구동하기 위한 구동장치를 설계 제작하였다. 밀리미터파 센서로부터 출력된 DC 신호는 저역통과 필터를 거쳐 DC 증폭 후에 ADC/DAQ를 이용하여 디지털 신호로 변환된다. 컴퓨터에서는 디지털 신호의 영상처리를 통해 $18{\times}64$ 화소의 해상도로 밀리미터파 수동 이미지를 획득한다. 시험 결과 제작된 시스템을 이용하여 사람과 은닉물체의 감지 영상을 얻을 수 있었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.339-342
• /
• 2004

본 논문은 밀리미터파 대역 무선통신 시스템 송신부의 응용을 위해 CPW 구조를 이용하여 V-band용 상향 주파수 혼합기와 2단 구동증폭기를 설계$\cdot$제작하였다. 능동소자는 본 연구실에서 제작한 $0.1{\mu}m$ 게이트 GaAs Pseudomorphic HEMTs(PHEMTs)를 사용하였으며 입$\cdot$출력단은 CPW를 사용해 정합 회로를 설계하였다. 제작된 상향 주파수 혼합기는 LO power 5.4 dBm, 2.4 GHz IF 신호를 -10.25 dBm으로 입력하였을 때 Conversion Loss 1.25 dB, LO-to-RF Isolation은 58 GHz에서 13.2 dB의 특성을 나타내었다 2단 구동 증폭기는 측정결과 60 GHz에서 S21 이득 13 dB, $58\;GHz\;\~\;64\;GHz$ 대역에서 S21 이득 12 dB 이상을 유지하는 광대역 특성을 얻었고 증폭기의 Pl dB는 3.8 dBm, 최대 출력전력은 6.5 dBm의 특성을 얻었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.335-338
• /
• 2004

We suggest Q-band MEMS MIMIC (Millimeter wave Monolithic Integrated Circuit) HEMT Oscillator using DAML (Dielectric-supported Airgapped Mcrostrip Line) structure. We elevated the signal lines from the substrate using dielectric post, in order to reduce the substrate dielectric loss and obtain low losses at millimeter-wave frequency. These DAML are composed with heist of $10\;{\mu}m$ and post size with $20\;{\mu}m\;{\times}\;20\;{\mu}m$. The MEMS oscillator was successfully integrated by the process of $0.1\;{\mu}m$ GaAs PHEMTs, CPW transmission line and DAML. The phase noise characteristic of the MEMS oscillator was improved more than 7.5 dBc/Hz at a 1 MHz offset frequency than that of the CPW oscillator And the high output power of 7.5 dBm was measured at 34.4 GHz.

• 한국통신학회논문지
• /
• 제28권3A호
• /
• pp.151-156
• /
• 2003

Millimeter waves are potentially useful for high resolution ranging and imaging in low optical visibility conditions such as fog and smoke. Also, They can be used for wide band communications since the currently used spectrum bands are already crowded. However, it is necessary to develop a theoretical and experimental understanding of millimeter wave propagation to assess the performance of millimeter wave systems. The intensity fluctuations and mutual coherence function (MCF) describe atmospheric effects on the millimeter wave propagation. Using the quasi-optical method (QOM), a practical and efficient method is suggested to obtain MCF from the flux measurement in the antenna focal plane.

• 대한전자공학회논문지SD
• /
• 제41권12호
• /
• pp.7-12
• /
• 2004

본 논문에서는 0.1 $\mum$ InGaAs/InAlAs/GaAs Metamorphic HEMT (High Electron Mobility Transistor)를 이용하여 DC~45 GHz 대역의 광대역 MIMIC(Millimeter-wave Monolithic Integrated Circuit) 분산 증폭기를 설계 및 제작하였다. MIMIC 증폭기의 제작을 위해 Metamorphic HEMT(MHEMT)를 설계 및 제작하였으며, 제작된 MHEMT는 드레인 전류 밀도 442 mA/mm, 최대 전달컨덕턴스(Gm)는 409 mS/mm를 얻었다. RF 특성으로 fT는 140 GHz fmax는 447 GHz의 양호한 성능을 나타내었다. 광대역 MIMIC 분산 증폭기의 설계를 위해 MHEMT의 소신호 모델과 CPW 라이브러리를 구축하였으며, 이를 이용하여 MIMIC 분산 증폭기를 설계하였다. 설계된 분산 증폭기는 본 연구에서 개발된 MHEMT MIMIC 공정을 이용하여 제작하였으며, MIMIC 분산 증폭기의 측정결과, DC ~ 45 GHz대역에서 6 dB 이상의 S21 이득을 얻었으며, 입력반사 계수는 45 GHz에서 -10 dB, 출력반사계수는 -7 dB의 특성을 나타내었다. 제작된 분산 증폭기의 칩 크기는 2.0 mm$\times$l.2 mm다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.411-412
• /
• 2008

The high performance 94 GHz MMIC(Monolithic Micro-wave Integrated Circuit) single balanced mixer was designed and fabricated, using MHEMT structure based diodes and a CPW(Coplanar Waveguide) tandem coupler. A novel single-balanced structure of diode mixer is proposed in this work, where a 3-dB tandem coupler with two section of parallel-coupled line. Implemented air-bridge crossover structures achieve wide frequency operation and the fabricated mixer exhibits excellent LO-RF isolation, larger than 30 dB, in the 5 GHz bandwidth of 91-96 GHz. A good conversion loss of 7.4 dB is measured at 94 GHz. The proposed MHEMT-based diode mixer shows superior LO-RF isolation and conversion loss to those of the W-band mixers reported to date.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.1133-1136
• /
• 2002

We designed and fabricated a low local oscillation (LO) power V-band CPW mixer module using a CPW-to-waveguide transition technology for the application of millimeter-wave wireless communication systems. The mixer was designed using a unique gate mixing architecture to achieve simultaneously a low LO input power, a high conversion gain, and good LO-RF isolation characteristics. The fabricated mixer exhibited a high conversion gain of 2 dB at a low LO power of 0 dBm. For data transmission of the 60 ㎓ wireless LNA systems, we fabricated a CPW-to-waveguide converter module of WR-15 type and mounted the fabricated mixer in the converter module. The fabricated V-band mixer exhibited a higher conversion gain and a lower LO input power than other reported V-band mixers.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.25-28
• /
• 2002

In this paper, a micromachined millimeter-wave end-gap band-pass filter (BPF) is presented. The millimeter-wave BPF is designed using 3D design software, Zeland IE3D with the center frequency of 60 GHz, band width of 3 GHz, ripple of 1㏈ and insertion loss of 2.5dB. This type of micromachined BPF can be used in millimeter-wave circuit.