• Journal of Applied Reliability
• /
• v.6 no.1
• /
• pp.27-36
• /
• 2006

It is increasingly important to ensure that a given vibration test specification of a particular machinery component is appropriately established by considering its real environmental conditions. Vibration test standards for electrical components are well documented, for example in an IEC 60068 series, while standards for machinery components are rarely found except a few military standards. Thus many vibration tests are performed based on the military standards. However, a test based on these military standards often results in over-testing, and under-testing in some cases due to the different environmental conditions. Also, these standards require an appropriate tailoring that may not be easily accomplished. In this paper, various international and military standards are compared and investigated to obtain test specifications relevant for machinery components. Also appropriate tailoring methods are demonstrated through a case study.

• Journal of the military operations research society of Korea
• /
• v.11 no.1
• /
• pp.55-78
• /
• 1985

This thesis provides the implementation of a simulation model for a particular Local Area Network (LAN), employs carrier sense multiple access (CSMA) bus architecture, which implements functions of the Stock Point Logistics Integrated Communication Environment (SPLICE). First, specifications of the model are identified based on the given functional specification and operating system design. Then the approach taken for modeling and programming in GPSS is discussed. Finally, the program and results of the simulation run are provided.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.1
• /
• pp.234-245
• /
• 2001

This paper considers the Maximum Pesponse Spectrum for the random vibration, sinusoidal vibration, linear sweep vibration. The random vibration quality levels and the sinusoidal vibration quality level are compared using MRS. And the severity between the vibration test specification and real environments using Maximum Response Spectrum are also compared using it.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.4 no.2
• /
• pp.112-121
• /
• 2001

From the beginning of 1990s, the leading countries, especially United States, are trying to develop dual-use technology which can be used for both military and commercial purpose, and to improve the efficiency of management system in logistics and procurements. Considering the global trends, Department of Defence has been seeking for solutions as to how to reform military specifications, and launched specification unification projects. As a result of the project, a series of dual-use standards for hardwares are being developed in the form of Korea Industrial Standards(KS standards). However, there are many of foreign standards, which are not readily interpretable by users, referenced in the standards. In this study, needs for the conversion of referenced foreign standards to KS standards are reviewed and the appropriate approaches as to the conversion are suggested.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.6
• /
• pp.771-778
• /
• 2013

Transmission is a core component of helicopter to transmit power from engine to rotor and must have a endurance to be able to show satisfactorily its performance required during its life time. When developing a new helicopter, both military and civil airworthiness authorities require a tie-down test to verify its endurance. Procedure for transmission endurance test is described in FAR part 29 or US military specification but its details are more or less ambiguous. In this paper, we have proposed a proper procedure for transmission endurance test by giving KUH transmission endurance test example including determination of applicable torque, load and test profile.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.10
• /
• pp.2473-2478
• /
• 2013

The recently developed military system adopts System Engineering for quality insurance. The process of military system's development basically adopts specification(MIL-STD-499) and system engineering(ISO/IEC 15288) that was developed by America. Recently the level of company's capability maturity is granted by measurement and assessment for the level of CMM or CMMI that was developed by Carnegie Mellon University. This article introduces adopted range of process that developed military system adopted additional process of CMMI. This article writes a merit of process for military system's output that is developing device adopted diverse process.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.210-213
• /
• 2012

The recently developed military system adopts System Engineering for quality insurance. The process of military system's development basically adopts specification(MIL-STD-499) and system engineering(ISO/IEC 15288) that was developed by America. Recently the level of company's capability maturity is granted by measurement and assessment for the level of CMM or CMMI that was developed by Carnegie Mellon University. This article introduces adopted range of process that developed military system adopted additional process of CMM. This article writes range of process for military system that is developing device adopted diverse process in the future.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.4
• /
• pp.536-544
• /
• 2016

The study on the precipitation particle distribution models in Korea for the environmental test and evaluation (T&E) from huge amount of measuring and reanalysis data is presented. Instead of related specifications of MIL-HDBK-310, with these models it can be possible to realize more realistic and efficient design and environmental T&E for the military and civil products especially for the atmospheric flying vehicles using in Korea.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.3
• /
• pp.25-32
• /
• 2006

Weapon systems composed of several subsystems execute various engagement missions in distributed combat environments in cooperation with a large number of subordinate/adjacent weapon systems as well as higher echelons through tactical data links. Such distributed weapon systems require distributed real-time simulation test beds to integrate and test their operational software, analyze their performance and effects of cooperated engagement, and validate their requirement specifications. These demands present significant challenges in terms of real-time constraints, time synchronization, complexity and development cost of an engagement simulation test bed, thus necessitate the use of high-performance distributed real-time simulation architectures, and modeling and simulation techniques. In this paper, in order to meet these demands, we presented a distributed real-time simulation system based on High Level Architecture(HLA) and Discrete Event System Specification(DEVS). We validated its performance by using it as a test bed for developing the Engagement Control System(ECS) of a surface-to-air missile system. The proposed technique can be employed to design a prototype or model of engagement-level distributed real-time simulation systems.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.9 no.1 s.24
• /
• pp.135-143
• /
• 2006

This paper describes a requirement architecture modeling for the front end of KT-1 export version requirement definition processes to construct SDS(system development specification). The requirement definition process is a highly conceptual process that is difficult to carry out. This paper focuses on how to perform the KT-1 export version requirements definition process including the integration of process, methods and tools for the front-end activity of requirements definition process. This requirement model is structured in four segments, including requirement layering, requirement categorization, life cycle stakeholder and requirement definition process using Computer-Aided Systems Engineering tool(CORE).