• Bulletin of the Korean Chemical Society
• /
• 제10권1호
• /
• pp.112-112
• /
• 1989

• 한국정밀공학회지
• /
• 제7권2호
• /
• pp.113-123
• /
• 1990

To study deleterious effects of contaminants contained in lubricating systems, the effects of fine alumina particle concentration and size on the critical failure load, friction and wear characteristic were examined on boundary lubrication condition using the four ball machine. The following conclusions are deduced: The abrasive is found to cause a transition from mild wear to severe wear at less severe conditions than with clean oil. In mild wear region the friction and wear increase with particle size and concentration, but in severe wear region do not exhibit any definite trend. In relation to film thinckness there is a threshold of particle size beyond which the failure load no longer decreases with particle size.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1990년도 제5회 파동 및 레이저 학술발표회 5th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.37-41
• /
• 1990

The quality of cutting surface such as surface roughness, heat affected zone, serf width can be improved by controlling the parameters of cuting process. These parameters includes cutting velocity, laser beam power, material depth and assistant gas. Thermodynamic analysis and systematical experiments are attempted to pedict and determine the optimal cutting condition. There exists the optimal cutting condition to ensure high quality surface. Under this operation, the minimum surface roughness of the mild steel, the stainless steel and the titanium becomes 3.8${\mu}{\textrm}{m}$ 13${\mu}{\textrm}{m}$ and 10${\mu}{\textrm}{m}$ respectively.

• 수산해양기술연구
• /
• 제48권1호
• /
• pp.82-90
• /
• 2012

Four different buildings having various wall construction are analyzed for the effect of wall mass on the thermal performance and inside building air and wall temperature transient and also for calculating the energy consumption load. This analytical study was motivated by the experimental work of Burch et al. An analytical solution of one-dimensional, linear, partial differential equations is obtained using the Laplace transform method, Bromwich and modified Bromwich contour method. A simple dynamic model using steady state analysis as simplified methods is developed and results of energy consumption loads are compared with results obtained using the analytical solution. Typical Meteorological Year data are processed to yield hourly average monthly values. This study is conducted using weather data from two different locations in Korea: Daegu having severe weather in summer and winter and Jeju having mild weather almost all year round. There is a significant wall mass effect on the thermal performance of a building in mild weather condition. Buildings of heavyweight construction with insulation show the highest comfort level in mild weather condition. A proportional controller provides the higher comfort level in comparison with buildings using on-off controller. The steady state analysis gives an accurate estimate of energy load for all types of construction. Finally, it appears that both mass and wall insulation are important factors in the thermal performance of buildings, but their relative merits should be decided in each building by a strict analysis of the building layout, weather conditions and site condition.

• 대한환경공학회지
• /
• 제34권2호
• /
• pp.103-108
• /
• 2012

연소과정 중에 발생하는 질소산화물을 저감하는 기술인 MILD 연소로는 연소용 공기 및 연료로 고온의 배기가스가 유입되는 양에 따라 질소산화물 저감 특성이 많은 영향을 받는다. 일반적인 MILD 연소로는 연료와 연소용 공기는 수직 상향방향이고 배기가스는 수직하향 방향으로 흐르면서 배기가스가 유입되는데 이러한 형태보다 더욱 배기가스의 유입량을 증가시키기 위한 방법으로 동심원관형태의 MILD 연소로를 사용하고 있다. 본 연구에서는 바깥 원통의 배기가스 통로에서 안쪽 원통의 연소통로 사이에 연결관을 설치하고 배기가스를 유입하기 위한 공기노즐을 동심원관 형태로 설치하여 공기분사속도, 노즐 직경, 배기가스측 압력과 연소로측 압력 차이의 변화에 따른 유입량 특성을 수치해석을 통해 살펴봄으로써 MILD 연소로에서 더욱 적극적인 배기가스의 유입량 특성을 파악하는 것을 연구하였다. 공기노즐 분사속도의 증가에 따라 유입량은 속도의 제곱근에 비례하는 것을 알았고 배기가스 측과 연소로 측의 압력차의 크기에 선형적으로 감소하는 것을 관찰하였다. 공기노즐 출구 위치의 변화는 유입량 변화에 큰 영향이 없음을 알 수 있었다.

• Physical Therapy Rehabilitation Science
• /
• 제11권3호
• /
• pp.304-310
• /
• 2022

Objective: Mild cognitive impairment (MCI) is a condition in which cognitive and executive functions are reduced, and older adults with MCI are ten times more likely to develop dementia than healthy older adults. Expression of brain-derived neurotrophic factor (BDNF) through aerobic exercise is associated with increased cognitive and executive functions. in this review, randomized controlled trials (RCTs) on the effects of aerobic exercise on BDNF in individuals with mild cognitive impairment are summarized and qualitatively and quantitatively analyzed to suggest the necessity of aerobic exercise. Design: a systematic review and meta-analysis. Methods: RCTs were searched for changes in BDNF through aerobic exercise using four international databases. Quality assessment and quantitative analysis were performed using RevMan 5.4. Quantitative analysis was quantified with a standardized mean difference (SMD) and presented as a random effect model. Results: Three RCTs evaluated BDNF in 123 patients with MCI. There was a significant improvement in the experimental group that performed aerobic exercise compared to the control group. The results analyzed using the random effects model were SMD = 0.48. Conclusions: In this review, we reported the effects and mechanisms of aerobic exercise in individuals with MCI. As a result of synthesizing RCTs that performed aerobic exercise, a significant increase in BDNF was confirmed.

• 한국항해항만학회지
• /
• 제31권7호
• /
• pp.579-587
• /
• 2007

Samchunpo(Sin Hyang) Harbor is located in the bay of Sa Chun, the central south coast of Korean peninsula. The harbor and coastal boundaries have been protecting by natural coastal islands and shoals. Currently, The Sin Hyang harbor needs maintenance and renovation of the sheltered structures against the weather deterioration and typhoon damages. Consequently to support this, the calculation of accurate design wave through the typhoon wave attack is necessary. In this study, calculation of incident wave condition is simulated using steady state spectrum energy wave model(wide area wave model) from 50 years return wave condition. And this simulation results in wide offshore area were used for the input of the extended mild slope wave model at the narrow coastal area. Finally, the calculation of design wave at Sin Hyang harbor entrance was induced by Boussinesq wave model(detail area wave model) simulation. The numerical model system was able to simulate wave transformations from generation scale to shoreline or harbor impact. We hope these results will be helpful to the engineers doing placement, design, orientation, and evaluation of a wide range of potential solutions in this area.

• 보건교육건강증진학회지
• /
• 제13권1호
• /
• pp.90-116
• /
• 1996

The purpose of this study is to provide basic data for the children so as to avoid any accidents and to improve their health through a sound and safe living environment with safety education established through more systematic methods. For the study, the methods used include the questionnaires for collecting data which are distributed among 273 children from 3 to 6 years old. They live in three districts of Seoul (Kangnam and Kangbuk), Kyeonggido (Munsan and Ilsan) and Incheon. The children's general characteristics are investigated and the relationship between the accident-proneness prospects and their results are analyzed assuming that children's health is expected to have an effect on their safety. The findings of the study are as follows: 1. The accident-proneness prospect (for the living safety) has significant difference in sleeping habits and physically weak conditions(p<0.05). 2. The accident-proneness prospect (for the traffic safety) has no significant difference in accordance with the children's health condition. 3. Children's reasoning power has no significant difference in accordance with their health condition. 4. Children's movement speed non-significantly differs in accordance with their health condition. 5. Children's movement stability has a significant difference in accordance with their health conditions such as history of mild disease(p<0.05) and physical work capacity(p<0.05). 6. Children's attention power has no significant difference in accordance with their health condition. 7. Children's characteristic activities show a significant difference in accordance with their health history of mild disease(p<0.05). mental health(p<0.05). eating habits(p<0.05) and others (i.e. auditory abnormality and skin desease)(p<0.05). 8. General assessment of the APP test has no significant difference in accordance with their health condition. 9. The health conditions are a significant difference in the history of mild disease in accordance with sex(p<0.05) and whole family members(p<0.001). Also there are shown significant differences. in accordance with sex(p<0.05). in physical work capacity(p<0.05). Eye sight, blood circulation and skin condition show significant differences in accordance with residence(p<0.05) and whole family members(p<0.01). and the condition of eating habits appeared significant in accordance with age(p<0.05). Also, sleeping habits and physically weak conditions shows significant differences in accordance with age(p<0.001) and housing pattern(p<0.01), and others (i.e. auditory abnormality and skin desease) show significant differences in accordance with residence (p<0.001).

• 한국재료학회지
• /
• 제22권11호
• /
• pp.591-597
• /
• 2012

For heat exchanger applications, 2-ply clad materials were fabricated by rolling of aluminum (Al) and mild steel sheets. Effects of annealing temperature on interface properties, especially on inter-layer formation and softening of strain hardened mild-steel, for Al/mild steel clad materials, were investigated. To obtain optimum annealing conditions for the Al/mild steel clad materials, annealing temperature was varied from room temperature to $600^{\circ}C$. At the annealing temperature about $450^{\circ}C$, an inter-layer was formed in an island-shape at the interface of the Al/mild steel clad materials; this island expanded along the interface at higher temperature. By analyzing the X-ray diffraction (XRD) peaks and the energy dispersive X-ray spectroscopy (EDX) results, it was determined that the exact chemical stoichiometry for the inter-layer was that of $Fe_2Al_5$. In some samples, an X-layer was formed between the Al and the inter-layer of $Fe_2Al_5$ at high annealing temperature of around $550^{\circ}C$. The existence of an X-layer enhanced the growth of the inter-layer, which resulted in the delamination of the Al/mild-steel clad materials. Hardness tests were also performed to examine the influence of the annealing temperature on the cold deformability, which is a very important property for the deep drawing process of clad materials. The hardness value of mild steel gradually decreased with increasing annealing temperature. Especially, the value of hardness sharply decreased in the temperature range between $525^{\circ}C$ and $550^{\circ}C$. From these results, we can conclude that the optimum annealing temperature is around $550^{\circ}C$ under condition of there being no X-layer creation.

• 한국해안해양공학회지
• /
• 제14권1호
• /
• pp.76-85
• /
• 2002

부유식 방파제는 고정식 방파제에 비하여 항 내·외 해수교환성은 우수한 반면, 항내 정은도가 다소 저하되는 특징이 있다. 따라서, 설계초기단계에서 부유식 방파제의 여러 평면배치 대안에 대하여 항내 정온도를 적절히 평가할 필요가 있다. 본 연구에서는 기존의 시간의존완경사 방정식을 부유식 방파제 설치안에 대해서도 적용할 수 있도록 하기 위하여 부유식 방파제의 반사와 투과를 동시에 반영할 수 있는 일종의 반사-투과 경계조건을 정식화하였다. 본 경계조건의 성능을 검토하기 위하여 이차원 및 삼차원 해석을 수행한 결과, 수치해석에 입력된 반사 및 투과율이 수치적으로 잘 구현됨을 확인하였다. 마지막으로 본 반사-투과 경계조건을 부유식 방파제가 설치되어 있는 가상적 항만에 적용하였으며, 본 수치해석이 부유식 방파제의 실해역 설치를 위한 실무에서도 충분히 효과적으로 이용될 수 있음을 예시하였다.