• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.456-456
• /
• 2000

The back projection histogram method has been proposed as the method to construct an image from waves reflected from a buried object for subsurface radar. This method is compose of two phases, i.e., a back projection image construction process and a back projection image superposition process. A simulation analysis of this method has been studied. In this paper, an experimental study is demonstrated in air as the homogeneous Held using three cylinders as buried objects.

• Korean Chemical Engineering Research
• /
• 제55권5호
• /
• pp.718-722
• /
• 2017

마이크로파 공정으로 제조된 순수한 $LaCoO_3$와 금속이온이 첨가된 $LaCoO_3$ 페롭스카이트 산화물에서 메틸오렌지의 광촉매 분해반응의 활성을 조사하였다. 순수한 $LaCoO_3$와 세슘 이온이 첨가된 $LaCoO_3$ 산화물들은 제조법과 무관하게 페롭스카이트 구조를 보여주었다. UV-Vis DRS 결과에 의하면 모든 촉매들은 가시광 영역에서 흡수스펙트럼을 나타내었다. 화학흡착된 산소종은 메틸오렌지의 광촉매 분해반응에서 중요한 역할을 하였으며, 화학흡착된 산소의 비율이 높을수록 더 높은 광촉매 활성을 보여주었다.

• 전자공학회논문지A
• /
• 제32A권3호
• /
• pp.68-77
• /
• 1995

Characteristics of electron cyclotron resonance (ECR) plasma thermal oxide grown at low-temperature have been investigated. The effects of several process parameters such as substrate temperature, microwave power, gas flow rate, and process pressure on the growth rate of the oxide have been also investigated. It was found that the plasma density, reactive ion species, is strongly related to the growth rate of ECR plasma oxied. It was also found that the plasma density increases with microwave power while it decreases with decreasing O2 flow rate. The oxidation time dependence of the oxide thichness showed parabolic characteristics. Considering ECR plasma thermal oxidation at low-temperature, the linear as well as parabolic rate constants calculated from fitting data by using the Deal-Grove model was very large in comparison with conventional thermal oxidation. The ECR plasma oxide grown on (100) crystalline-Si wafer exhibited good electrical characteristics which are comparable to those of thermal oxide: fixed oxide charge(N$_{ff}$)= 7${\times}10^{10}cm^{-2}$, interface state density(N$_{it}$)=4${\times}10^[10}cm^{-2}eV^{-1}$, and breakdown field > 8MV/cm.

• Journal of electromagnetic engineering and science
• /
• 제16권1호
• /
• pp.44-51
• /
• 2016

A commercial $0.25{\mu}m$ GaN process is used to implement 6-18 GHz wideband power amplifier (PA) monolithic microwave integrated circuits (MMICs). GaN HEMTs are advantageous for enhancing RF power due to high breakdown voltages. However, the large-signal models provided by the foundry service cannot guarantee model accuracy up to frequencies close to their maximum oscillation frequency ($F_{max}$). Generally, the optimum output load point of a PA varies severely according to frequency, which creates difficulties in generating watt-level output power through the octave bandwidth. This study overcomes these issues by the development of in-house large-signal models that include a thermal model and by applying distributed L-C output load matching to reactive matched amplifiers. The proposed GaN PAs have successfully accomplished output power over 5 W through the octave bandwidth.

• 대한전자공학회논문지SD
• /
• 제43권12호
• /
• pp.40-46
• /
• 2006

본 연구에서는 GaAs/AlGaAs 구조의 수직 구조 레이저 - 완전 공핍 광 싸이리스터를 제작하여, 광 논리 및 광 스위칭 시스템에 응용할 수 있는, 광 AND- 와 OR- 게이트를 구현하였고, 그 특성을 측정, 분석하였다. 제작된 단일 소자 타입의 광 싸이리스터는 하나의 소자에서 간단한 기준 스위칭 전압의 변화만으로 광 AND 와 OR 게기트를 모두 구현할 수 있다는 장점을 갖는다. 활성층 위, 아래에 1/4 파장 거울층 구조를 채택하고, 선택적 산화공법을 이용하여 0.65 mA의 낮은 문턱전류 값을 얻었고, 50dB 이상의 높은 온/오프 대비를 보였으며, 높은 광 출력 효율과 입력 광 신호에 대한 높은 선택도를 얻을 수 있었다. 제작된 광 싸이리스터는 실험적으로 S자형의 전류-전압 특성곡선을 얻었고, 빛의 세기가 증가함에 따라 스위칭 전압이 5.20V에서 1.90V로 현저히 줄어드는 것을 확인하였다

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.158-166
• /
• 2004

원자력 발전소에서 발생하는 방사성 폐기물인 이온교환수지, 제올라이트, 활성탄 및 슬러지에 포함된 핵종 분석을 위한 최적의 산분해 조건을 확립하였다. 방사성 폐기물의 분해에는 혼합산을 이용한 밀폐형 극초단파 산분해법을 사용하였으며, 제안한 방법에 따른 산분해 후의 용액은 맑고 색이 없는 투명한 상태임을 확인할 수 있었다. 또한, 산분해 과정을 거친 각각의 용액 시료는 ICP-AES와 AAS를 사용하여 분석하였고, 모의 방사성 폐기물에 첨가한 5종의 금속 원소들은 94% 이상의 높은 회수율을 보여주었다. 화학적 특성을 고려하여 제안된 산분해 조건은 핵종 분석을 위한 효과적인 전처리 방법으로써, 향후 원전의 유형별 방사성 폐기물에 대해 보편적으로 적용될 수 있을 것으로 판단된다.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제12권2호
• /
• pp.65-71
• /
• 2007

토양복원의 기술로 마이크로파를 이용할 시 휘발성물질((PAH)s 등)) 및 준휘발성((PCB)s 등) 물질 등을 처리하는데 효과적인 것으로 알려져 있다. 본 연구에서는 휘발성 물질인 BTEX를 마이크로파를 이용하여 수분변화 및 전력변화에 따른 제거특성을 연구하였다. 10%, 20%, 30%, 50%의 함수율 변화에 따른 BTEX 제거율은 20%일 때가 제거율이 가장 높음을 제거상수를 통해 도출할 수 있었으며, 전력의 변화에 따른 BTEX 제거율 및 제거율에 도달하는 시간은 비슷한 것으로 나타났다. 각각 다른 함수율이 마이크로파 처리 시 한계함수율에 도달하는 시간을 측정한 결과, 한계함수율에 도달하는 시간은 함수율이 10%, 20%, 30%일 때는 2 kW와 4 kW는 큰 차이가 없음을 알 수 있었고, 함수율이 50%일 경우는 한계함수율에 도달하는 시간이 4kW가 더 빠른 것으로 나타났다. 수분함수율에 따른 최적전력을 도출하면 수분함량이 $10{\sim}30%$ 시 2 kW가 경제적으로 나타났으며, 함수율이 50% 일 경우는 전력이 4 kW일 때 경제적인 것으로 나타났다.

• 한국재료학회지
• /
• 제17권12호
• /
• pp.669-675
• /
• 2007

Hydroxyapatite (HAp) and biphasic calcium phosphate (BCP) nano powders were synthesized using the microwave-assisted synthesis process dependent on pH and microwave irradiation time. The average size of a powder was less than 100 nm in diameter. Through in-vitro cytotoxicity tests by an extract dilution method, the HAp and BCP nano powders have shown to be cytocompatible for L-929 fibroblast cells, osteoblastlike MG-63 cells and osteoclast-like Raw 264.7 cells. The activation of osteoblast was estimated by alkaline phosphatase (ALP) activity. When the HAp and BCP were treated to MG-63 cells, alkaline phosphatase activities increased on day 3, compared with those of the untreated cells. Also, the collagen fibers increased when the HAp and BCP powders suspension were treated to MG-63 cells, compared to those of the untreated cells. Quantitative alizarin red S mineralization assays showed a trend toward increasing mineralization in osteoblast cultured with powder suspension. In conclusion, hydroxyapatite and biphasic calcium phosphate appeared to be a bone graft substitute material with optimal biocompatibility and could be further applied to clinical use as an artificial bone graft substitute.

• Journal of Electrical Engineering and Technology
• /
• 제6권2호
• /
• pp.263-269
• /
• 2011

In this study, the compositions for the microwave dielectric materials were investigated to obtain the improved dielectric properties, the high temperature stability, and the sintering temperature of less than $900^{\circ}C$, which was necessary for cofiring with the internal conductor of silver. In addition, the dielectric sheets were prepared by the tape casting technique, after which the sheets were laminated and sintered. In this process, the optimum ratio of powder and binder, laminating pressure, temperature, and possibility for cofiring with the internal conductor were studied. Finally, multilayer chip treplexer filter for the 800-2,000 MHz range were fabricated, and the frequency characteristics of the triplexer filter were investigated. When the $0.6TiTe_3O_8-0.4MgTiO_3+3wt%SnO+7wt%H_3BO_3$ ceramics were sintered at $820^{\circ}C$ for 0.3 hours, the microwave dielectric properties of the dielectric constant of 29.91, quality factor of 33,000 GHz, and temperature coefficient of resonant frequency of -2.76 ppm/$^{\circ}C$ were obtained. Using the Advanced Design System (ADS) and High Frequency Structure Simulator (HFSS), the multilayer chip triplexer filter acting at the range of 800-2,000 MHz were simulated and manufactured. The manufactured triplexer filter had the excellent frequency properties in the CDAM800, GPS and PCS frequency regions, respectively.

• Journal of Biosystems Engineering
• /
• 제40권3호
• /
• pp.224-231
• /
• 2015

Purpose: Corn is a major commercial crop targeted for genetic modification owing to its high consumer demand as a foodstuff for humans and livestock, as well as its other industrial applications. However, the safety of genetically modified (GM) crops is controversial. Indeed, several countries have banned the importation of GM seeds that can germinate. Therefore, development of effective, convenient, and nondestructive methods to inhibit seed germination is required. Methods: This study aimed to examine the efficacy of microwave heat treatment for inhibition of germination of corn kernels and for optimization of power and exposure time required for effective aging treatment. Artificial inhibition was induced in corn kernels using microwave heat treatment. Seven power levels were examined (400, 500, 600, 700, 800, 900, and 1000 W) at each of the four exposure times (0.5, 1.0, 1.5, and 2.0 min). Results: Corn kernels could be aged effectively after heating for 0.5~1.0 min at powers greater than 800 W, with increasing efficacy observed at higher powers. Further analysis showed that the most effective inhibition of germination was observed at 1000 W for 40 s. This setting did not cause any physical damage to the corn kernels. Conclusions: Optimal inhibition of corn kernel germination was achieved using higher power for shorter times, which may be useful for industrial corn seed treatment.