• Journal of the Korean Wood Science and Technology
• /
• v.23 no.3
• /
• pp.28-32
• /
• 1995

The presteamed or prefrozen persimmon blocks of 10cm ${\times}$ 10cm ${\times}$ 15cm were air-dried at room temperature until about 30% moisture content, and then were dried in a MW oven. During drying their internal temperatures were monitored with thermo-couple probes. The presteamed and prefrozen blocks didn't show any improvement in drying rate and moisture gradient when compared with the controls. Checks appeared on the surfaces of most presteamed blocks during air-drying. It has been clearly revealed that the maximum weight, loss must, be less than 2g/min during MW drying to prevent internal checking and that MW drying reduced moisture gradients inside blocks. MW dried the persimmon blocks 440 times faster than conventional kiln.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.11
• /
• pp.6023-6028
• /
• 2013

Recently, biodegradable polymers are gaining more and more attention due to international environmental issues. Succinic acid is synthesised by chemical process of hydrogenation. Succinic acid synthesized has certain amount water content. To remove the water contained in succinic acid is used generally by hot air drying process. But recently, microwave drying process having the advantage of shortening the drying time and uniform drying of product are gaining more attention. In this study, hot air drying and microwave drying efficiency were compared at drying process. In addition, we confirmed commercial applicability in microwave drying process of succinic acid. Microwave drying process has higher efficiency than 70% compared with hot air drying process at thickness of 1cm. Economic efficiency were compared through examination of power consumption for complete drying of succinic acid at microwave and hot air dyring.

• Journal of Biosystems Engineering
• /
• v.43 no.3
• /
• pp.237-246
• /
• 2018

Purpose: This study (a) investigated the effect of microwave power intensity and sample thickness on microwave drying characteristics of radish strips, and (b) determined the best-fit drying model for describing experimental drying data, effective moisture diffusivity ($D_{eff}$), and activation energy ($E_a$) for all drying conditions. Methods: A domestic microwave oven was modified for microwave drying and equipped with a small fan installed on the left upper side for removing water vapor during the drying process. Radishes were cut into two fixed-size strip shapes (6 and 9 mm in thickness). For drying experiments, the applied microwave power intensities ranged from 180 to 630 W at intervals of 90 W. Six drying models were evaluated to delineate the experimental drying curves of both radish strip samples. The effective moisture diffusivity ($D_{eff}$) was determined from Fick's diffusion method, and the Arrhenius equation was applied to calculate the activation energy ($E_a$). Results: The drying time was profoundly decreased as the microwave power intensity was increased regardless of the thickness of the radish strips; however, the drying rate of thicker strips was faster than that of the thinner strips up to a certain moisture content of the strip samples. The majority of the applied drying models were suitable to describe the drying characteristics of the radish strips for all drying conditions. Among the drying models, based on the model indices, the best model was the Page model. The range of estimated $D_{eff}$ for both strip samples was from $2.907{\times}10^{-9}$ to $1.215{\times}10^{-8}m^2/s$. $E_a$ for the 6- and 9-mm strips was 3.537 and 3.179 W/g, respectively. Conclusions: The microwave drying characteristics varied depending on the microwave power intensity and the thickness of the strips. In order to produce high-quality dried radish strips, the microwave power intensity should be lower than 180 W.

• Analytical Science and Technology
• /
• v.10 no.6
• /
• pp.418-426
• /
• 1997

Dewatered digested sewage sludge were heated with microwave and their drying characteristics were investigated on the effect of their surface area, shape, diameter and thickness. The drying characteristics of identical samples in a conventional drying oven were studied. In conventional drying, constant rate period was not found and moisture was evaporated with capillary action. Moisture in the sludge was a bound water and free water was not exist. In microwave drying, the falling rate period was divided into two zones. In falling rate drying period, moisture movement occured by diffusion. The evaporation surface area was a significant variable, the greater heating surface area promoted water removal rate over wide region of water content. Drying rate was slow and constant rate drying period was found in wide moisture content region with increasing diameter. Drying characteristics appeared differently in various shape. In microwave heating, first of all temperature of sludge center was increased and was the highest. Temperature in the constant rate drying period was remained constantly at $80{\sim}100^{\circ}C$.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.27 no.3
• /
• pp.393-398
• /
• 1998

The loss of ascorbic acid in dried red pepper leaves prepare with different drying methods of air-, oven-, microwave oven-, and vacuum drying with blanching or without was determined by a HPLC method. Vacuum drying showed the least loss of ascorbic acid than the other drying methods. Additionally, the feasibility of near infrared reflectance spectroscopy(NIRS) to determine the contents of ascorbic acid in the red pepper leaves was studied. NIRS was found to be an efficient way of determining ascorbic acid contents in red pepper leaves, requiring only 30 seconds of an analytical time.

• Korean Journal of Metals and Materials
• /
• v.47 no.8
• /
• pp.516-521
• /
• 2009

In this study we report a rapid synthesis of nanoporous organo-functional silica (OFS) with unimodal and bimodal pore structures encompassing pores ranging from meso-to macroscale. The problems of tediousness and high production cost in the conventional syntheses are overcome by co-condensation of an inexpensive inorganic precursor, sodium silicate with an organosilane containing trimethyl groups. The insitu covalent anchoring of the non-polar trimethyl groups to the inner pore walls prohibits irreversible shrinkage of the wet-gel during microwave drying at ambient pressure and thus larger size pores (from ca. 20 to ca. 100 nm) can be retained in the dried silica. The drying process of the silylated wet-gels at an ambient pressure can be greatly accelerated upon microwave exposure instead of drying in an oven or furnace. Using this approach, anoporous and superhydrophobic silicas showing a wide variation in texture and morphology can be readily synthesized in roughly two hours. The effects of various sol-gel parameters solely on the textural properties of the organo-functional silica (OFS) have been investigated and discussed.

• Journal of Korean society of Dental Hygiene
• /
• v.12 no.3
• /
• pp.641-646
• /
• 2012

Objectives : The purpose of this study is to analyze the sterilizing effects of toothbrushes by administering bacteria into toothbrushes and reproducing the antibacterial effects using a microwave oven. Methods : The heads of four-row mid-strength toothbrushes were cut, put in a bacterial solution ($3{\times}10^9cells/ml$) for vortexing, and sterilized with microwaves for 0, 30, and 60 seconds. They were then moved into four tubes containing DW 10 ml and suspended in a vortex mixer for two minutes to separate bacteria from them. DW 9ml was added by 1ml of bacteria for dilution of $10{\sim}10^6$ times. It was then administered to the BHI agar plate by 0.1ml and cultured at $37^{\circ}C$ for 24 hours. Total number of bacteria adhered to a toothbrush was obtained by multiplying the number of colonies by the dilution factor. The experiment was done in the first, second, and third step, being repeated in a normal temperature drier ($23^{\circ}C$) after 5, 9 and 24 hours. Results : The results of the experiment revealed that the sterilizing effects were 95% or over. When toothbrushes were sterilized for 60 seconds, the number of colonies is about 11 after drying for 5 hours, 7 after drying for 9 hours and 2 after drying for 24 hours. The sterilizing effects reached 98% when the bacteria-administered toothbrush was sterilized for 1 minute after drying for 24 hours. Conclusions : The results demonstrated that toothbrush sterilizing by using microwave is a suitable way to prevent cross-contamination of toothbrushes by oral bacterial infection and thus easy to use at home. However, this study suggests that toothbrush sterilizing by using microwave should be limited within two times a week because the physical properties of toothbrush might be changed.

• Korean Journal of Food Science and Technology
• /
• v.15 no.2
• /
• pp.155-159
• /
• 1983

Alpha-barley were prepared by means of soaking, heating, and drying treatment. The degree of gelatinization ${\alpha}-barley$ were determined. The yield of ${\alpha}-barley$ prepared by microwave heating, steaming, and autoclaving were in the range of 95-98%, whereas by boiling, only 74-89% of ${\alpha}-barley$ were obtained. The degree of gelatinization of ${\alpha}-barley$ prepared by 5 min microwave heating and 10 min and 20 min steaming were around 90%. Alpha-barley prepared by boiling, autoclaving and 30 min steaming showed above 95% of degree of gelatinization.

• Preventive Nutrition and Food Science
• /
• v.1 no.2
• /
• pp.196-202
• /
• 1996

The effect of cooking(boiling, steaming and baking0and drying on the cholesterol content and formation of oxidized cholesterols in quid(Japanese flying squid, Todarodes pacificus) was studied. Cholesterol content of live squid meat varied with the portion sampled, and results from spectrophotometric assay ranged from 263.2mg/1..g(mantle) to 315.8mg/100g(tentacle). The cholesterol levels analyzed by gas chromatography(GC) for squid samples were lower by 7% of total cholesterol for live squid meat and 24% for processed meat than those results by spectrophotometric assay. Cooking resulted in the decrease of the initial total cholesterol content of raw meat from 10%(boiling for 5min.) to 25%(steaming for 5min.) The amounts of cholesterol remaining after baking were 68% for microwave oven samples and 64% for convection oven samples. Drying of raw tissue caused the greater reduction in cholesterol content than cooking but showed no significant difference in samples stored for 6 weeks at 4$^{\circ}C$ and 2$0^{\circ}C$. Raw squid meats contained essentially no oxidized cholesterols, while the 22-hydroxychoesterol was detected in frozen meats. The additional oxidized cholesterols as cholestane-triol was indentified with 22-hydroxycholesterols in cooked samples. Sun dried meat stored at 4一 and 2$0^{\circ}C$ for 6 weeks had the three kinds of oxidized cholesterols such as 22-hydroxycholesterol, cholesta-3,5-dien-7-one and cholestane-triol.

• Korean Journal of Food Science and Technology
• /
• v.33 no.1
• /
• pp.55-59
• /
• 2001

Pressure-puffing system or extruder has been used to puff rice kernel or rice flour. Most of the study on rice puffing were the effect of process conditions such as moisture content and heating temperature on physical and chemical characteristics of popped rice. The study on mechanism and development of instant puffed rice like popcorn has been limited. Extruded waxy rice pellets were puffed in a microwave oven after drying and conditioning. Extruded pellets were formed with extrusion conditions of $20{\sim}27%$ moisture content, 2.76 MPa $CO_2$ gas injection pressure and 200 rpm screw speed. Under these conditions, puffed waxy rice pellets in microwave oven had low density and soft texture. Density and texture of puffed waxy rice pellet could be optimized by control of moisture content, $CO_2$ gas injection pressure and screw speed that affect significantly when puffing extruded waxy rice pellet.