• Journal of Korean Society for Atmospheric Environment
• /
• v.14 no.2
• /
• pp.133-142
• /
• 1998

Gas adsorption on adsorbents depends on temperatures and pressures. When these parameters are fixed, the adsorption capability and selectivity can not be changed. If the gas adsorption is controlled by another factor like electromagnetic field, the adsorption and desorption can be managed by much intentional way. The microwave has characteristics to excite particular components such as water without destroying it. In this study, microwave was irradiated to the adsorbent of an NaY zeolite which is almost transparent to microwave. As vapor of 1, 1, 2- trichloro-1, 2, 2-trifluoroethane (CFC-113) and water flowed simultaneously on the zeolite packed in a column at room temperature, only water was adsorbed. The . adsorbed water was removed from the zeolite and then replaced by CFC-113, since the microwave was irradiated. Greater the power of microwave was, more CFC-113 was adsorbed. The water adsorption took place again after a latent period by stopping the microwave irradiation.

• Bulletin of the Korean Chemical Society
• /
• v.24 no.2
• /
• pp.253-255
• /
• 2003

• The Journal of Korean Academy of Prosthodontics
• /
• v.28 no.2
• /
• pp.109-124
• /
• 1990

The purpose of this study was to investigate the physical propertise and determine whether three were any differences in the amount of porosity of the denture base resins cured by microwave irradiation and conventional water bath heating. The resins used in this study were K-33 resin and Acron MC resin. The properties selected were transverse strength, Knoop hardness, and density. A ten-power eyepiece and scanning electron microscope(Magnification of ${\times}$ 30and ${\times}$150)were used to examine the specimens for porosity. Through analyses of the data from this study, the following conclusions were obtained. 1. Microwave energy can be effectively use dtopolymerize poly(methylmethacrylate) denture base resins. 2. In the transverse strength, K-33 resin cured by microwave irradiation was the first highest, water bath cured K-33 resin the second, microwave cured Acron MC resin the third, water bath cured Acron MC resin the fourth. 3. In the Knoop hardness, K-33 resin cured by microwave irradiation was the first hardest, water bath cured K-33 resin the second, water bath cured Acron MC resin the third, microwave cured Acron MC resin the the fourth. 4. No significant difference was found between the density of resin denture bases polymerized by either method. 5. K-33 resin showed the most porosity for the microwave curing. But there was no significant difference in the Acron MC resin and other curing method.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.5
• /
• pp.1155-1158
• /
• 2010

Microwave-assisted Michael reaction between EMME and various amines such as diphenylamine, 4-methyl-N-phenylbenzenamine, N-phenylnaphthalen-1-amine, dihexylamine, diisopropylamine, and 4-nitrobenzenamine were described. Solvent-free conditions on alumina as solid support in the presence of $K_2CO_3$ catalysts gave moderate to good yields (55 - 93%) of diethylmalonate analogues having enamine moieties under focused microwave irradiation.

• Journal of the Korean Chemical Society
• /
• v.55 no.6
• /
• pp.936-939
• /
• 2011

Thiamine hydrochloride (VB1) has been used as an acid catalyst in organic synthesis. One pot three component Biginelli condensation of dimedone, urea/thiourea and substituted aromatic aldehydes catalyzed by 10 mol % of thiamine hydrochloride (VB1) in solvent free condition under microwave irradiation in good to excellent yields has been investigated. Utilization of microwave irradiation, simple reaction conditions, short reaction time, ease of product isolation, and purification makes this manipulation very interesting from an economic and environmental perspective.

• Korean Journal of Pharmacognosy
• /
• v.21 no.4
• /
• pp.284-289
• /
• 1990

Crude Aconiti Tubers were irradiated with microwave for 5 or 10 min with or without $NaHCO_3$. Ten min-irradiation reduced the contents of aconitine and mesaconitine to the level of those of commercially available processed Aconiti tuber power which is prepared with the high pressure-high temperature technique. The contents of benzoylaconine of the 10 min-irradiated Aconiti tubers were also comparable to those of commerciallized processed Aconiti tuber powder. However, irradiation with 1% $NaHCO_3$ soln. resulted in the drastic reduction of all the three above alkaloids.

• Macromolecular Research
• /
• v.17 no.11
• /
• pp.901-906
• /
• 2009

Several aromatic optically active polyamides (PA)s were synthesized from 5-(2-phthalimidiylpropanoylamino)isophthalic acid with various aromatic diamines via direct polycondensation with triphenyl phosphite and pyridine in the presence of calcium chloride and N-methyl-2-pyrrolidone under microwave irradiation and conventional heating conditions. Under the optimized conditions, the reaction mixture was irradiated for 2 min. with a 100% irradiation power (900 W). The resulting polymers were obtained in high yield and moderate inherent viscosity ranging from 0.35 to 0.60 dL/g. All synthesized polymers showed excellent solubility in amide-type solvents. Thermogravimetric analysis revealed a 10% weight loss temperature and char yield at $600^{\circ}C$ in a nitrogen atmosphere of > $350^{\circ}C$ and > 58%, respectively, which suggests that the resulting PAs have good thermal stability.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.11
• /
• pp.4001-4004
• /
• 2011

Various 5-substituted 1H-tetrazole derivatives were synthesized in a simple and environmentally benign method from the reaction of aryl and benzyl nitriles with sodium azide in solvent-free media using montmorillonite K-10 clay as solid recyclable heterogeneous acidic catalyst and microwave irradiation in good yields and short reaction times.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.788-791
• /
• 2008

ZnO nanoparticle was successfully prepared by microwave irradiation method in various oxygen/nitrogen ratio atmospheres. The product prepared in a low oxygen ratio atmosphere showed tetra pod shape with high aspect ratio, c/a. PL spectra of the products showed higher UV emission intensity than the others when it was prepared in the atmosphere oxygen/nitrogen=40/60.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.2918-2920
• /
• 2009

Various indan-1,3-dione derivatives were synthesized from the reaction of different phthalic anhydrides with diethylmalonate using montmorillonite KSF clay as a recyclable heterogeneous acidic catalyst and microwave irradiation in good yields and short reaction times.