• Journal of Forest and Environmental Science
• /
• v.13 no.1
• /
• pp.81-89
• /
• 1997

Urban river needs continuous observation for the river conservation because river surrounding environment sensitivly is changed by human activity. In order to grasp the effect of human activity against Taebaek river in Chunchon city, this research analysed the channel shape change, fluctuation volume and bias degree over five times, for June, 1993 to June, 1996. The results were as follows : 1. The change of channel shape on each surveying time mainly occurred in June, 1996 and maximum deposition. $1,247m^3$ occurred on 19~20 section, maximum scouring, $340m^3$ occurred on 6~7 section, 2. When comparing with June, 1993, increased deposition volume of channelbed was about $4,600m^3$ in June, 1996, 3. The bias degree of channel mainly occurred in June, 1996 of surveying times and at 6, 7, 15, 16, 17, 18, 19, 20 line of surveying lines.

• The Journal of Korean Academy of Prosthodontics
• /
• v.45 no.6
• /
• pp.795-804
• /
• 2007

Statement of problem. Nano-scale calcium-phosphate coating on the anodizing titanium surface using ion beam-assisted deposition (IBAD) has been recently introduced to improve the early osseointegration. However, not much is known about their surface characteristics that have influence on tissue-implant interaction. Purpose. This study was aimed to investigate microtopography, surface roughness, surface composition, and wettability of the titanium surface modified by the anodic oxidation and calcium phosphate coating using IBAD. Material and methods. Commercially pure titanium disks were used as substrates. The experiment was composed of four groups. Group MA surfaces represented machined surface. Group AN was anodized surface. Group CaP/AN was anodic oxidized and calcium phosphate coated surfaces. Group SLA surfaces were sandblasted and acid etched surfaces. The prepared titanium discs were examined as follows. The surface morphology of the discs was examined using SEM. The surface roughness was measured by a confocal laser scanning microscope. Phase components were analyzed using thin-film x-ray diffraction. Wettability analyses were performed by contact angle measurement with distilled water, formamide, bromonaphtalene and surface free energy calculation. Results. (1) The four groups showed specific microtopography respectively. Anodized and calcium phosphate coated specimens showed multiple micropores and tiny homogeneously distributed crystalline particles. (2) The order of surface roughness values were, from the lowest to the highest, machined group, anodized group, anodized and calcium phosphate deposited group, and sandblasted and acid etched group. (3) Anodized and calcium phosphate deposited group was found to have titanium and titanium anatase oxides and exhibited calcium phosphorous crystalline structures. (4) Surface wettability was increased in the order of calcium phosphate deposited group, machined group, anodized group, sandblasted and acid etched group. Conclusion. After ion beam-assisted deposition on anodized titanium, the microporous structure remained on the surface and many small calcium phosphorous crystals were formed on the porous surface. Nanoscale calcium phosphorous deposition induced roughness on the microporous surface but hydrophobicity was increased.

• Ocean Systems Engineering
• /
• v.1 no.3
• /
• pp.195-205
• /
• 2011

A method for calibrating a laser profiling system for seafloor micro-topography measurements is described. The system consists of a digital camera and an arrangement of six red lasers that are mounted as a unit on a remotely operated vehicle (ROV). The lasers project as parallel planes onto the seafloor, creating profiles of the local topography that are interpreted from the digital camera image. The goal of the calibration was to determine the plane equations for the six lasers relative to the camera. This was accomplished in two stages. First, distortions in the digital image were corrected using an interpolation method based on a virtual pinhole camera model. Then, the laser planes were determined according to their intersections with a calibration target. The position and orientation of the target were obtained by a registration process. The selection of the target shape and size was found to be critical to a successful calibration at sea, due to the limitations in the manoeuvrability of the ROV.

• The Journal of Korean Academy of Prosthodontics
• /
• v.42 no.3
• /
• pp.307-326
• /
• 2004

Statement of problem. The long-term success of implants is the development of a stable direct connection between bone and implant surface, which must be structural and functional. To improve a direct implant fixation to the bone, various strategies have been developed focusing on the surface of materials. Among them, altering the surface properties can modify cellular responses such as cell adhesion, cell motility and bone deposition. Purpose. This study was to evaluate the cellular behaviors on the surface-modified titanium by morphological observation, cellular proliferation and differentiation. Material and methods. Specimens were divided into five groups, depending on their surface treatment: electropolishing(EP) anoclizing(AN), machining(MA), blasting with hydroxyapatite particle(RBM) and electrical discharge machining(EDM). Physicochemical properties and microstructures of the specimens were examined and the responses of osteoblast-like cells were investigated. The microtopography of specimens was observed by scanning electron microscopy(SEM). Surface roughness was measured by a three-dimensional roughness measuring system. The microstructure was analyzed by X-ray diffractometer(XRD) and scanning auger electron microscopy(AES). To evaluate cellular responses to modified titanium surfaces, osteoblasts isolated from neonatal rat were cultured. The cellular morphology and total protein amounts of osteoblast-like cell were taken as the marker for cellular proliferation, while the expression of alkaline phosphatase was used as the early differentiation marker for osteoblast. In addition, the type I collagen production was determined to be a reliable indicator of bone matrix synthesis. Results. 1. Each prepared specimen showed specific microtopography at SEM examination. The RBM group had a rough and irregular pattern with reticulated appearance. The EDM-treated surface had evident cracks and was heterogeneous consisting of broad sheet or plate with smooth edges and clusters of small grains, deep pores or craters. 2. Surface roughness values were, from the lowest to the highest, electropolished group, anodized group, machined group, RBM group and EDM group. 3. All groups showed amorphous structures. Especially anodized group was found to have increased surface oxide thickness and EDM group had titaniumcarbide(TiC) structure. 4. Cells on electropolished, anodized and machined surfaces developed flattened cell shape and cells on RBM appeared spherical and EDM showed both. After 14 days, the cells cultured from all groups were formed to be confluent and exhibited multilayer proliferation, often overlapped or stratified. 5. Total protein amounts were formed to be quite similar among all the group at 48 hours. At 14 days, the electropolished group and the anodized group induced more total protein amount than the RBM group(P<.05). 6. There was no significant difference among five groups for alkaline phosphatase(ALP) activity at 48 hours. The AN group showed significantly higher ALP activity than any other groups at 14 days(P<.05). 7. All the groups showed similar collagen synthesis except the EDM group. The amount of collagen on the electropolished and anodized surfaces were higher than that on the EDM surface(P<.05).

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.6
• /
• pp.699-713
• /
• 2003

Statement of problem. Titanium is the most important material for biomedical and dental implants because of their high corrosion resistance and good biocompatibility. These beneficial properties are due to a protective passive oxide film that spontaneously forms on the surface. Purpose. The purpose of this study was to evaluate the responses of osteoblast-like cells on different surface treatments on Ti discs. Material and Methods. Group 1 represented the machined surface with no treatment. Group 2 surfaces were sandblasted with $50{\mu}m\;Al_2O_3$ under $5kgf/cm^2$ of pressure. Groups 3 and 4 were sandblasted under the same conditions. The samples were treated on a titanium oxide surface with reactive sputter depositioning and thermal oxidation at $600^{\circ}C$ (Group 3) and $800^{\circ}C$ (Group 4) for one hour in an oxygen environment. The chemical composition and microtopography were analyzed by XRD, XPS, SEM and optical interferometer. The stability of $TiO_2$ layer was studied by petentiodynamic curve. To evaluate cell response, osteoblast extracted from femoral bone marrow of young adult rat were cultured for cell attachment, proliferation and morphology on each titanium discs. Results and Conclusion. The results were as follows : 1. Surface roughness values were, from the lowest to the highest, machined group, $800^{\circ}C$ thermal oxidation group, $600^{\circ}C$ thermal oxidation group and blasted group. The Ra value of blasted group was significantly higher than that of $800^{\circ}C$ thermal oxidation group (P=0.003), which was not different from that of $600^{\circ}C$ thermal oxidation group (P<0.05). 2. The degree of cell attachment was highest in the $600^{\circ}C$ thermal oxidation group after four and eight hours (P<0.05), but after 24 hours, there was no difference among the groups (P>0.05). 3. The level of cell proliferation showed no difference among the groups after one day, three days, and seven days (P>0.05). 4. The morphology and arrangement of the cells varied with surface roughness of the discs.

• The Journal of Korean Academy of Prosthodontics
• /
• v.41 no.3
• /
• pp.300-318
• /
• 2003

Statement of problem: The success of implants depends on intimate and direct contact of implant material on bone tissue and on functional relationship with soft tissue contact. Creation and maintenance of osseointegration depend on the understanding of the tissue's healing, repairing, and remodeling capacity and these capacities rely on cellular behavior. Altering the surface properties can modify cellular responses such as cell adhesion, cell motility, bone deposition, Therefore, various implant surface treatment methods are being developed for the improved bone cell responses. Purpose: The purpose of this study was to evaluate the responses of osteoblast-like cells to surface-modified titanium. Materials and Methods: The experiment was composed of four groups. Group 1 represented the electropolished surface. Group 2 surfaces were machined surface. Group 3 and Group 4 were anodized surfaces. Group 3 had low roughness and Group 4 had high roughness. Physicochemical properties and microstructures of the discs were examined and the responses of osteoblast-like cells to the discs were investigated. The microtopography was observed by SEM. The roughness was measured by three-dimension roughness measuring system. The microstructure was analyzed by XRD, AES. To evaluate cell responses to modified titanium surfaces, osteoblasts isolated from calvaria of neonatal rat were cultured. Cell count, morphology, total protein measurement and alkaline phosphatase activities of the cultures were examined. Results and Conclusion: The results were as follows 1. The four groups showed specific microtopography respectively. Anodized group showed grain structure with micropores. 2. Surface roughness values were, from the lowest to the highest, electropolished group, machined group, low roughness anodized group, and high roughness anodized group. 3. Highly roughened anodized group was found to have increased surface oxide thickness and surface crystallinity. 4. The morphology of cells, flattened or spherical, were different from each other. In the electropolished group and machined group, the cells were almost flattened. In two anodized groups, some cells were spherical and other cells were flattened. And the 14 day culture cells of all of the groups were nearly flattened due to confluency. 5. The number of attached cells was highest in low roughness anodized group. And the machined group had significantly lower cell count than any other groups(P<.05). 6. Total protein contents showed no difference among groups. 7. The level of alkaline phosphatase activities was higher in the anodized groups than electropolished and machined groups(P<.05).

• Journal of Ecology and Environment
• /
• v.30 no.4
• /
• pp.347-356
• /
• 2007

The structure and dynamics of Korean red pine stands established in the riparian zone were studied in the Tsang stream in Mt. Seorak National Park, in east-central Korea. Pine stands were classified into four successional stages, the initial, establishing, competitive, and stabilizing stages, based on the age distribution of a dominant tree, Pinus densiflora, the vegetation stratification, and the microtopography of the riverine environment. The stages usually corresponded to disturbance frequencies, depending on the horizontal and vertical distances from the watercourse. Stands of the initial and establishing stages lacked tree or subtree layers, or both. As stands progressed through the developmental stages, soil particle size became finer and moisture retention capacity was improved. The stand ordination reflected the developmental stage, and the species ordination differentiated species specializing in relatively dry and wet habitats. The results of the analysis of vegetation dynamics provided ecological information which will be useful for understanding the developmental processes of vegetation established in riparian zones. Species diversity indices usually increased across developmental stages, following the typical pattern for successional processes. We discuss the importance and necessity of riparian vegetation in Korea, where most riparian forests have disappeared due to excessive human land use.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.1
• /
• pp.129-137
• /
• 2000

In this paper, a new method of noncontact measurement has been developed for a 3 dimensional topography in semiconductor wafer, implementing a new optical probe based on the precision defocus measurement. The developed technique consists of the new optical probe, precision stages, and the measurement/control system. The basic principle of the technique is to use the reflected slit beam from the specimen surface, and to measure the deviation of the specimen surface. The defocusing distance can be measured by the reflected slit beam, where the defocused image is measured by the proposed optical probe, giving very high resolution. The distance measuring formula has been proposed for the developed probe, using the laws of geometric optics. The precision calibration technique has been applied, giving about 10 nanometer resolution and 72 nanometer of four sigma uncertainty. In order to quantitize the micro pattern in the specimen surface, some efficient analysis algorithms have been developed to analyse the 3D topography pattern and some parameters of the surface. The developed system has been successfully applied to measure the wafer surface, demonstrating the line scanning feature and excellent 3 dimensional measurement capability.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.174-174
• /
• 2021

지표면에서 소규모의 요철로 이루어진 미세지형 (Micro Topography)은 자연 지형의 일반적인 특징이다. 지표면에서의 흐름해석 시 이러한 미세지형에 의한 효과를 정확히 고려하기 위해서는 고해상도의 지형격자를 사용하여야 하나, 대부분의 지표유출모델은 미세지형이 존재하지 않는 저해상도의 거친 표면으로 간주함으로써 바닥 마찰 효과를 증가시켜 미세지형에 의한 영향을 대략적으로만 반영한다. 본 연구에서는 보다 정확한 강우-유출 및 유사-유출 해석을 목적으로 고해상도의 지형격자를 사용하여 미세지형을 포함한 건조 및 반건조 지대에서의 흐름을 수치적으로 모의하였다. 미세지형의 형태는 마루와 골 사이가 직선으로 이루어진 파동의 형태로 이상화 하였으며, 파동의 진폭과 파장을 조절하여 다양한 형태의 미세지형을 고려하였다. 수치모형은 흐름의 움직임에 대한 Saint-Venant 방정식과 침식 및 유사이송에 대한 Hairsine-Rose 방정식을 함께 계산하는 통합모형인 tRIBS-FEaST를 사용하였다. 수치 모의 결과에서 나타난 미세지형의 핵심 영향은 최대 유량 및 유사량 도달시간의 지연, 유사 입자 크기별 유사-유출량 증감, 그리고 하천 유출(stream flow)의 생성이었다. 또한, 미세지형의 형태에 따라 미세지형과 강우-유출 및 유사-유출 사이에 비례 혹은 반비례 관계가 성립함을 보였다. 수치 모의 결과를 종합적으로 검토하여 미세지형이 강우-유출과 유사-유출에 미치는 영향에 대해 논의하였으며, 기존 Manning 거칠기 계수를 통한 해석 방법의 적부를 판단하였다.

• The Korean Journal of Ecology
• /
• v.24 no.1
• /
• pp.27-34
• /
• 2001

We described the vegetation of a disturbed lagoon wetland in relation to water and soil environments in Kungae lagoon reclaimed 30 years ago. Water depth and soil organic matter showed a great spatial heterogeneity in Kungae wetland which was changed into a freshwater marsh by the dike construction. Detrended canonical correspondence analysis suggested that differences in vegetation structure were primarily the result of variation in water depth or microtopography and soil organic matter Various emergent vegetations were developed in the wetland: species such as Phragmites australis, Calamagrostis epigeios, Carex dispalata and Lythrum anceps in a wide area, hydrophyes such as Typha angustifolia and Scirpus tabernaemontani at the low elevation with deep water, ruderals such as Bidens frondosa and Persicaria perfoliata near upland with much soil organic matter and sand-dune vegetation such as Carex kobomugi, Diodia tens, Pinus thunbergii and Potentilla egedei var. groenlandica at the high elevation. These results suggest that development of a prototype for wetland restoration from vegetation analysis of other natural lagoons and restoration of natural water tables and hydrologic connections between the diked wetland and the sea are important in the disturbed Kungae wetland.