• 제목/요약/키워드: Microstructural differentiation

검색결과 4건 처리시간 0.018초

북방전복 Haliotis discus hannai 정자의 미세구조적 분화 (Microstructural Differentiation of Sperm in the Abalone Haliotis discus hannai (Gastropoda: Haliotidae))

  • 김혜진;김현진;신소령;백은란;이정식
    • 한국해양생명과학회지
    • /
    • 제6권1호
    • /
    • pp.23-30
    • /
    • 2021
  • 북방전복 Haliotis discus hannai 웅성생식세포의 분화과정과 정자의 형태를 미세구조적으로 기재하였다. 정자의 분화과정은 정원세포기, 정모세포기, 정세포기 및 정자기의 4단계로 구분하였다. 정원세포기에서 정모세포기로의 분화과정은 형태학적 변화가 크지 않았다. 그러나 정자변태과정 동안 염색질 응축, 핵의 형태 변화, 첨체와 중편 및 편모 형성 등의 급격한 형태학적 변화를 나타냈다. 북방전복의 정자는 두부, 중편 및 미부로 구성되며, 두부의 길이는 약 5.3 ㎛로 전자밀도가 높은 핵과 총알형의 첨체로 이루어져 있었다. 중편은 기저체와 미토콘드리아로 구성되어 있었으며, 기저체를 중심으로 5개의 미토콘드리아가 한 층으로 배열되어 있었다. 미부의 횡단면은 "9+2"의 미세소관 구조를 보였다. 이러한 형태 및 구조적 특징은 북방전복의 정자는 원시형(primitive type) 정자임을 보여주는 결과이다.

광릉늑대거미 (Arctosa kwangreungensis) 배후발생과정의 조직 미세구조 분석 (Histologic and Microstructural Analyses on Postembryonic Development in the Wolf Spider Arctosa kwangreungensis (Araneae: Lycosidae))

  • 양성찬;문명진
    • Applied Microscopy
    • /
    • 제42권1호
    • /
    • pp.17-26
    • /
    • 2012
  • 배회성거미류의 배후발생과정에서 형태적 분화가 행동학적 특성으로 발현되는 기전을 규명하기 위하여 광릉늑대거미(Arctosa kwangreungensis) 후기배아와 각 발생 단계의 유충을 실험재료로 그 조직학적 및 미세구조적 변화를 광학 및 주사전자현미경으로 분석하였다. 난황주머니를 가진 후기배아는 부속지의 근육조직과 신경절의 미분화로 비활성상태를 유지하며, 시각기의 신경절과 신경의 발달도 미약하였다. 제1령 유충의 두흉부에서는 미분화된 세포집단이 관찰되고 체색의 발현과 복부신경절의 분화가 현저하였다. 먹이 활동을 시작하는 제2령 유충의 중추신경계에는 신경섬유가 급격히 증가되었고, 성체와 유사한 부속지의 분절구조와 시각기의 조직학적 체제가 확립되었다. 제3령 이후의 유충들은 탈피를 거듭하여 두흉부에서 중추신경계가 차지하는 영역이 축소되었고 독선과 근육조직, 그리고 결합조직등의 활발한 분화가 진행되었다. 먹이활동을 시작하는 제2령 유충 단계에서 부속지와 시각기의 조직학적 발생과 이를 통제하는 신경계의 분화가 완료되는 것으로 미루어, 섭식환경이 배후발생과정을 조절할 수 있으며, 특히 시각과 부속지에 의존하여 먹이를 포획하는 배회성거미류의 행동 습성이 형태조직학적 분화와 연관되어 있음을 확인할 수 있었다.

북방전복(Haliotis discus hannai) 난모세포의 미세구조적 분화 (Microstructural Differentiation of the Oocyte in the Abalone Haliotis discus hannai)

  • 김혜진;김현진;김영숙;이정식
    • 한국수산과학회지
    • /
    • 제53권1호
    • /
    • pp.90-97
    • /
    • 2020
  • The purpose of this study was to provide basic information on sexual maturity and reproductive biology for the management of biological resources in abalone Haliotis discus hannai. The nucleus of the oogonium occupied about 42% of the cytoplasm, and had a distinctive basophilic chromatin. The cytoplasm of previtellogenic oocytes was homogeneous and the size of nuclear pores increased. Fine granular and vacuolar yolk granules were observed in the cytoplasm of the initial vitellogenic oocyte. In this stage, the egg stalk and jelly membrane began to develop. The nucleus of the active vitellogenic oocyte was located near the animal pole. Yolk granules were strongly acidophilic. Lampbrush chromosomes were observed in the nucleus and rough endoplasmic reticulum. Annulate lamellae developed in the cytoplasm. The shape of the ripe oocyte was rounded polygonal. The size of ripe oocytes was 202.9±21.40×142.1±18.82 ㎛ and the thickness of the jelly membrane was 10.1±1.52 ㎛. These results show that yolk accumulation in H. discus hannai is based on two methods: exogenous accumulation, through the egg stalk, and endogenous accumulation, through intracellular organelles. Management of biological resources will be necessary when oocytes predominate after the active vitellogenic stage.

Micro-CT - a digital 3D microstructural voyage into scaffolds: a systematic review of the reported methods and results

  • Cengiz, Ibrahim Fatih;Oliveira, Joaquim Miguel;Reis, Rui L.
    • 생체재료학회지
    • /
    • 제22권4호
    • /
    • pp.279-289
    • /
    • 2018
  • Background: Cell behavior is the key to tissue regeneration. Given the fact that most of the cells used in tissue engineering are anchorage-dependent, their behavior including adhesion, growth, migration, matrix synthesis, and differentiation is related to the design of the scaffolds. Thus, characterization of the scaffolds is highly required. Micro-computed tomography (micro-CT) provides a powerful platform to analyze, visualize, and explore any portion of interest in the scaffold in a 3D fashion without cutting or destroying it with the benefit of almost no sample preparation need. Main body: This review highlights the relationship between the scaffold microstructure and cell behavior, and provides the basics of the micro-CT method. In this work, we also analyzed the original papers that were published in 2016 through a systematic search to address the need for specific improvements in the methods section of the papers including the amount of provided information from the obtained results. Conclusion: Micro-CT offers a unique microstructural analysis of biomaterials, notwithstanding the associated challenges and limitations. Future studies that will include micro-CT characterization of scaffolds should report the important details of the method, and the derived quantitative and qualitative information can be maximized.