• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.998-1009
• /
• 1999

In this paper, a microstrip aperture-patch antenna and a microstrip ring antenna, which have single microstrip line feeding systems for the circular polarization, are designed, and experimental results are presented at X-band. The microstrip aperture-patch antenna is characterized by its wide operating frequency range, and the microstrip ring antenna is suitable for a basic radiator in the large array antenna due to its small size. Several design parameters for these antennas are considered and analyzed to improve antenna characteristics such as VSWR bandwidth and axial ratio. Initially, the sizes of the aperture and ring radiator are determined on a basis of the cavity model, then shapes of the patch within the aperture and the inner stub of the ring are optimized using Ensemble software. Measurement results show that the aperture-patch antenna has 25% of VSWR bandwidth and 1.2dB of axial ratio at the boresight, and the ring antenna has 6.7% of VSWR bandwidth and 1.6dB of axial ratio at the boresight.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.12
• /
• pp.1176-1179
• /
• 2011

In this paper, design of series-fed microstrip antennas with sum and difference patterns is presented for millimeter-wave applications. The antenna was designed to exhibit high-gain and low side-lobe level(SLL) below -20 dB. A conventional transmission-line model, Taylor and Bayliss distributions were employed to determine current distribution for sum and difference patterns. Moreover, connecting lines between microstrip patches were tuned to achieve an optimized design. The measurement was also performed to validate the designed antennas.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.8
• /
• pp.1796-1803
• /
• 2013

In this paper, a novel particle swarm optimization method based on IE3D is used to design a mobile communication microstrip patch antenna. The aim of the paper is to design and fabricate an inset fed rectangular microstrip antenna and study the effect of antenna dimensions length (L), width (W) and substrate parameters relative dielectric constant (${\varepsilon}r$), substrate thickness on radiation parameters of band width. PSO algorism was applied to IE3D, low resistance against, band width and advantage, were improved.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.187-190
• /
• 2001

In this paper we designed a dual-frequency circular sector microstrip antenna fed microstrip line with orthogonal polarization. The operating frequencies and polarization characteristics of the proposed antenna is calculated by using a cavity model. The antenna operating at about 1.87 GHz and 2.42 GHz is fabricated and its S-parameters and radiation patterns are measured.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.8
• /
• pp.1740-1746
• /
• 1997

In this paper, a waveguide-fed slot-coupled microstrip antenna is proposed as enhanced feeding structure of microstrip antenna and an analysis is presented. The presence of dielectric substrate between a stripand a slot is explicitly taken into account in this analysis. The evaluation of the antenna characteristics is carried out using the method of mements and the spectral domain approach in terms of the electric current distribution on the strip and the magnetic current distribution on the slot. From the results, we can conclude that the proposed structure is adequate for array antennas, due to ease of mass porduction and enhanced anteena performance.

• ETRI Journal
• /
• v.31 no.3
• /
• pp.271-281
• /
• 2009

This paper presents a novel multiband microstrip-fed right angle slot antenna design technique for multiple independent frequency bands. The new technique uses various slot sizes at various appropriate positions. We first propose a tri-band slot antenna consisting of three right angle slots. Then, a quad-band slot antenna is developed with four right angle slots which achieves slant ${\pm}45^{\circ}$ linear polarization, omnidirectional pattern coverage, good antenna gain, and acceptable impedance bandwidths over all the operating frequency range. Moreover, an open-circuited tuning stub is introduced to achieve good impedance matching. Both proposed antennas are designed on a ground plane of RT/duroid 5880 substrate with a thickness of 1.575 mm. The real measurable results show that the desired frequencies used in wireless communication systems, namely, WLAN and WiMax, are efficiently achieved.

• Journal of electromagnetic engineering and science
• /
• v.1 no.1
• /
• pp.67-72
• /
• 2001

In this paper, the plano-convex lens antenna fed by a single patch is studied for a microwave remote-traffic monitoring sensor with constraints of small size and low cost. Measurement of an AUT (Antenna Under Test) involves the considerations of a triangular groove for matched layer and metallic shielding effects. A formulation for extracting the parameters of a piano-convex lens antenna, based on geometrical optics, is introduced using Fermat`s principle of the equi-phased ray condition. Teflon ($\varepsilon_{{\gamma}}$/ =2.0) is chosen as a material of a plano-convex lens antenna for adjustment of aberrations on the lens surfaces automatically. A fabricated plano-convex lens shows 3-dB beamwidth of 7.5 degree and side-lobe level of -29 dB with an aperture distribution of the parabolic-squared taper on pedestal. This lens supports easier integration with the planar microwave circuits by using a microstrip single patch as a primary feeder of the lens antenna.feeder of the lens antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.4
• /
• pp.636-644
• /
• 1999

Experimental and simulation results are presented on the Aperture-Coupled microstrip patch antennal with U-shaped slot. Experiment and simulation results include impedance bandwidth, copolar and crosspolar-pattern characteristics and gain measurements. Simulation results show the advantages of U-slotted patch antenna comparing with the normal patch antenna. More than 35% impedance bandwidth is obtained with reasonably restricted cross-polar radiation pattern. The U-slotted radiation element fed by aperture-coupling method can be more easily extended to array structure, compared with that fed by coaxial cable.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.662-664
• /
• 2010

In this paper, it is studied that the design method for the planar quasi-Yagi antenna suitable for the operation over 5-10GHz band. Yagi antenna is fed by a short-ended microstrip line and matched by a Balun circuit embedded within the antenna. The results for the characteristics of the Yagi antenna fabricated on the FR4 substrate (${\epsilon}_r$= 4.4, h=0.8mm) agreed well with those predicted by computer simulations.

• Journal of Advanced Navigation Technology
• /
• v.20 no.5
• /
• pp.490-495
• /
• 2016

In the present study, a microstrip-fed monopole antenna is proposed for wireless local area network (WLAN) operations which cover dual band of 2.4 GHz (2.4 ~ 2.484 GHz) and 5 GHz (5.15 ~ 5.825 GHz). In order to obtain its compact structure and good omnidirectional radiation patterns, a modified inverted L-shaped slot separated from ground for impedance matching in 5 GHz band is etched on 2.4 GHz printed monopole antenna. The proposed antenna is designed and fabricated on a FR4 substrate with dielectric constant 4.3, thickness of 1.6 mm, and size of $30{\times}45mm^2$. The measured impedance bandwidths (${\mid}S_{11}{\mid}{\leq}-10dB$) of fabricated antenna are 270 MHz (2.22 ~ 2.48 GHz) in 2.4 GHz band and 890 MHz (5.08 ~ 5.97 GHz) in 5 GHz band respectively. In particular, high gain of more than about 4 dBi and good omnidirectional radiation patterns have been observed over the entire frequency band of interest.