• ETRI Journal
• /
• v.31 no.3
• /
• pp.324-326
• /
• 2009

We present the design of a compact microstrip lowpass filter with a wide stopband which is up to ten times the cutoff frequency. The filter is based on a coupled-line configuration and shunt open stubs. The open stubs create additional transmission zeros, which are used to extend the stopband of the filter without any additional components or cascaded units. A prototype lowpass filter with a 3 dB cutoff frequency of 0.428 GHz and a 15 dB stopband extended up to 4.77 GHz is fabricated to validate the theoretical predictions.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.1
• /
• pp.36-43
• /
• 2004

In this paper, we proposed a novel compact microstrip lowpass filter with an ultra-wide stopband and prominent cutoff sharpness using slot on the ground plane and microstrip shunt open stub. The microstrip shunt open stub and slot exhibit the different stopband response. The combined characteristics of these structures gives the ultra-wide stopband characteristics and the coupling effect between slots on the ground plane makes the prominent cutoff sharpness. The fabricated microstrip lowpass filter with the size of 20.1 mm ${\times}$ 18.7 mm has -3 ㏈ cutoff frequency at 1.187 ㎓ and -20 ㏈ stopband from 1.33 ㎓ to over 20 ㎓ and the insertion loss in the passband is less than -0.4 ㏈ form DC to 1 ㎓.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.7
• /
• pp.644-652
• /
• 2004

In this paper, we designed a cascaded microstrip lowpass filter using the lowpass filters previously proposed. The previously proposed lowpass filters have a ultra-wide stopband and prominent cutoff sharpness using the combined characteristics of slot and microstrip open stub, respectively, and they are catagorized into 2 types by the method that determining their passband characteristics. The first type is determined its passband characteristics by open stub characteristics and the second is by slot characteristics. By cascading these structures with impedance adjustment of each element, the deeper out-of-band rejection and the sharper skirt response were achieved. The fabricated cascaded lowpass filters have -3㏈ cutoff frequencies at 1.035㎓ and 1.286㎓ respectively and -20㏈ stopband is over 20㎓ for both structures.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.538-541
• /
• 2013

A compact microstrip lowpass filter (LPF) with an elliptic function response is proposed. A high equivalent capacitance and inductance between the structures of the resonator result in the sharp transition band of 0.04 GHz from 4 GHz to 4.04 GHz with an attenuation level of -3 dB and -20 dB, respectively. To improve the LPF rejection band, multiple open stubs are connected to the proposed resonator. A filter with a 3-dB cut-off frequency at 4 GHz is designed, fabricated, and measured, and agreement between the measured and simulated results is achieved. The results show that a stopband bandwidth of 131% with a suppression level better than -20 dB is obtained while achieving a compact size with a wide stopband.

• Journal of electromagnetic engineering and science
• /
• v.11 no.4
• /
• pp.257-261
• /
• 2011

A highly efficient 2.4 GHz rectenna is designed using a harmonic rejection bandpass filter. The rectenna is printed on Rogers Duroid 5880 substrate with ${\varepsilon}_r$=2.2 and a thickness of 1.6 mm. The rectenna consists of a microstrip antenna and high order harmonic rejection bandpass filter, microstrip lowpass filter, and Schottky barrier diode (HSMS2820). The use of a $2^{nd}$ and $3^{rd}$ harmonic rejection microstrip bandpass filter in the rectenna results in high conversion efficiency. The proposed rectenna achieves a RF to DC conversion efficiency of 72.17 % when the received RF power is 63.09 mW.

• ETRI Journal
• /
• v.19 no.2
• /
• pp.48-58
• /
• 1997

Using high quality high-$T_c$ superconducting (HTS) YBCO thin films, we designed and fabricated 3-pole, 5-pole, and 7-pole lowpass filters consisting of microstrip transmission lines and open-stub lines. We measured the microwave response of the filters in the temperature range of T=85 K to 27 K. AtT=30 K, the observed inband insertion loss was 0.14dB and 0.02dB for the 5-pole and 7-pole filters, respectively. The cut-off frequency was 4.7 GHz for the 5-pole filter and 7.9GHz for the 7-pole filter. To the authors' knowledge, the measured inband insertion losses are the best values reported so far for the open-stub line type HTS multipole lowpass filters. The skirt property of the 5-pole filter showed a large improvement over that of the 3-pole filter as predicted from the simulation. We found that, to obtain a stable performance, the HTS multipole lowpass filters should be operated at the temperatures between 60% and 70% of $T_c$.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.985-988
• /
• 2011

A novel application of a dual-transmission line is proposed to design a lowpass filter (LPF). The proposed structure uses only transmission line elements to produce an equiripple LPF response with sharp roll-off. Design equations are derived using a lossless transmission line model. Controlling the electrical lengths, three transmission-zeros are realized in the stopband to obtain a sharp roll-off rate and wide stopband bandwidth. A single unit microstrip LPF with a 3-dB cut-off frequency at 1.0 GHz having a roll-off of 135 dB/GHz along with a stopband bandwidth of 69.5% is designed for validation.

• ETRI Journal
• /
• v.33 no.6
• /
• pp.981-984
• /
• 2011

A novel lowpass filter with a very sharp transition band and wide stopband is proposed. The proposed filter is based on T-shaped patches which are etched in symmetrical structures and folded open stub. To obtain a wide stopband, we have used stub loaded semi-circle stepped-impedance structures. By designing the resonator with high inductance and capacitance, a very sharp transition band is achieved. The proposed filter has a 3-dB cutoff frequency at 2.37 GHz and a 40-dB rejection at 2.44 GHz. The stopband with an attenuation level better than -13.2 dB is up from 2.4 GHz to 16 GHz, and consequently we have reached the high and wide rejection in stopband with compact size. Good agreements between the simulated and the measured results are presented.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.3
• /
• pp.25-31
• /
• 2003

In this paper, we proposed a novel compact microstrip lowpass filter with an ultra-wide stopband and a sharp cutoff frequency response. To improve the cutoff response of the conventional filter, the coupling effect between two open stubs is used. The slot on the ground with conventional shunt open stubs plays an important role of increasing the stopband at a high frequency. The combination of these structures gives the filter the characteristics of an ultra-wide stopband with a prominent cutoff sharpness. The fabricated microstrip lowpass filter with the size of 19.2 mm $\times$ 14.9 mm has -3 dB cutoff frequency at 1.1 GHz and -20 dB stopband from 1.5 GHz to over 30 GHz. The insertion loss is less than -0.15 dB in the passband.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.331-334
• /
• 2006

In this paper, we designed and fabricated the lowpass filter with the wide stopband characteristics using microp- strip line. Adding the $\lambda_g/4$ open stub at the input and output ports, we developed the L-C ladder type lowpass filter using the open stub which has wide stopband characteristics. In order to reduce the entire size qf this filter, the high impedance microstrip lines were made with the meander structure. The lowpass filter was fabricated with the cutoff frequency 2.3 GHz and its measured frequency responses agree well with the simulation results.