• 전기학회논문지
• /
• 제56권1호
• /
• pp.161-166
• /
• 2007

In this paper, two 4$\times$4 rectangular patch array antennas operating at 20 GHz are implemented for the satellite communication. The sixteen patch antennas and microstrip feeding line are printed on a single-layered substrate. The design goal is to achieve high directivity and gain by optimizing design parameters through permutations in element spacing. The spacing between the array elements is chosen to be 0.736$\lambda$. Numerical simulation results indicate that the HPBW(Half-Power Beam Width) of the 4$\times$4 patch array antenna is 18.78 degrees in the E-plane and 18.48 degrees in the H-plane with a gain of 17.18 dBi. Numerical simulations of a 4$\times$4 recessed patch array antenna yield a HPBW of 18.71 degrees in the E-plane and 17.82 degrees in the H-plane with a gain of 19.43 dBi.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2003년도 종합학술발표회 논문집 Vol.13 No.1
• /
• pp.473-477
• /
• 2003

In this paper, a integrated structure of a two-element microstrip patch antenna with two feeds for GPS/PCS dual-band operation is proposed. The radiating element for PCS operation is a novel broad band low-profile cylindrical monopole top-loaded with a shorted meander patch, which gives linearly polarized conical radiation pattern and size reduction of patch due to meander line. The radiating element for GPS operation is a novel square-ring microstrip patch with truncated corners and slits. which provide circularly polarized broadside radiation patterns and size reduction due to slots. using dielectric substrate in GPS antenna of proposed antenna provide to improve isolation between two feeds and reduce size of patch. The proposed antenna achieves the bandwidth and polarization requirements of GPS and PCS systems.

• 한국통신학회논문지
• /
• 제21권5호
• /
• pp.1294-1303
• /
• 1996

In this paper, the microstrip anntenna with broad bandwidth is designed using parasitic element. In the designed cofiguration, parasitic element of the same resonating length but different width which is coupled to the nonradiating edge of a rectangular patch antenna. The driven element aloe is fed and the other part is operated as parasitic element. So the different patchs are resonating at differnt frequencies and this multiple resonance increase the bandwidth. The overall size of the antenna is not increased by adding parasitic element to a driven patch. Compared to the available wideband microstrip antennas, the designed antenna structure is bery compact. A theoretical explanation of the rectangular patch antenna coupled with prarsitic is analyzed by extending the theory of coupled microstrip lines. The theoretical and experimental results for a patch coupled with a single parasitic are presented.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.350-353
• /
• 2000

In this paper, we designed the microstrip patch antenna with L-shaped aperture, which greatly enhances its bandwidth. We optimized to get a maximum bandwidth. The microstrip patch antenna with L-shaped aperture has the widest bandwidth of the conventional aperture coupled microstrip patch antenna. This antenna also has the low-cross polarization level. The effects of changing several key design parameters of the antenna are investigated. We calculated the VSWR, input impedance, and radiation pattern.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.293-296
• /
• 2002

In this paper, we proposed a beam tilting microstrip patch array antenna for the reception of satellite signals by using low cost copper etched polyester films and foams. The configuration and coupling mechanism of the proposed antenna are similar to the dipole Yagi-Uda antenna. It is composed of 3 layers of polyester films and three layers of foam. In order to prevent unwanted radiation and coupling loss by microstrip feeding networks and parasitic patches, a stacked layer with rectangular slots above the driver patch array is inserted. The 16${\times}$8 element microstrip Patch way antenna is Presented by experimental results. Its beam patterns are affected by many parameters such as sizes of the patches, gap between the patches. characteristics of the substrates, feeding method, etc. Owing to its complexities of various design parameters, both simulation and experiment were performed. The fabricated antenna received DBS signal from KOREASAT 3 by doing nothing but adjusting azimuth direction.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2002년도 종합학술발표회 논문집 Vol.12 No.1
• /
• pp.285-289
• /
• 2002

본 논문에서는 중심주파수가 5.8㎓에서 동작하는 마이크로스트립 라인-프로브 급전구조를 갖는 마이크로스트립 패치 배열 안테나를 설계 및 제작하였다. 마이크로스트립 라인-프로브 급전구조는 안테나의 광대역 특성과 배열 구조를 가능하게 하여 이득을 향상시킬 수 있다. 그 결과, 대역폭은 17.6%(VSWR<2)이며, 안테나 이득은 8㏈i 를 얻었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 하계종합학술대회 논문집 I
• /
• pp.625-628
• /
• 2003

In this paper, a wideband two-layer H-shaped microstrip antenna for WLAN is designed and studied experimentally. To increase the bandwidth of microstrip patch antenna, a configuration of stacked type using parastic element is used, Furthermore, to reduce the size of microstrip patch antenna, the first technique is H-shaped patch type. the second technique is that the main radiator and parastic patch are shorted to the ground plane using ten shorting posts. The antenna bandwidth and radiation characteristics are calculated by ENSEMBLE ver. 5.0 simulation software, and compared with the experimental results, Experimental results show that the return loss is less than -10dB over the band of 5.086GHz to 5.832GHz, which is quite good agreement with the calculations.

• 한국컴퓨터산업학회논문지
• /
• 제10권3호
• /
• pp.67-72
• /
• 2009

본 연구에서는 중심주파수 2.64GHz로 중앙 대각선에 슬롯을 갖는 마이크로스트립 패치 안테나를 패치의 크기, 슬롯의 길이 및 폭 등의 파라미터를 변환하며 시뮬레이션을 한 후, 각각의 파라미터에 따른 영향을 연구하고 최적화된 형태의 안테나를 특성을 연구하였다. 설계된 마이크로스트립 패치 안테나의 특성을 설계 분석하기 위해 Ansoft사의 HFSS(High Frequency Structural Simulator)을 사용하여 설계된 안테나의 특성을 검토 및 분석하였다.

• 한국정보통신학회논문지
• /
• 제3권3호
• /
• pp.533-540
• /
• 1999

본 논문에서는 구형 패치를 이용하여 GPS용 마이크로스트립 안테나를 설계하였으며 안테나의 특성을 확인하기 위하여 시뮬레이션을 통해 단일 구형 마이크로스트립 패치 안테나의 폭과 급전선을 변화 시켰다. 그리고 축비를 이용하여 우선회 원형편파 특성을 확인하였고, 결과를 통해 유한차분 시간영역법은 마이크로스트립 안테나를 설계하기 위한 효과적인 방법임을 확인하였다. 시뮬레이션을 통한 GPS위성으로부터 수신된 주파수의 공진점을 확인하였고, 측정치와 비교적 잘 일치하였다.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 추계종합학술대회
• /
• pp.913-916
• /
• 2005

일반적인 단층형 마이크로스트립 패치 안테나 위에 새로운 패치를 두어 그 패치 위에 빗살무늬를 가진 슬롯을 추가하였다. 이러한 구조의 시뮬레이션 결과로 빗살무늬 패치에 의해 마이크로스트림 안테나의 고이득 특성과 광대역의 입력 임피이던스 특성을 얻을 수 있다.