• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.5
• /
• pp.238-242
• /
• 2001

In this paper, we extracted design parameters for re-entrant mode microstrip directional coupler using FE(finite element) calculations. The microstrip directional coupler suffers from a poor directivity due to effect of the inhomogeneous dielectric including both dielectric substrate and air in microstrip transmission lines. Thus, the phase velocity of even mode is not equal to that of odd mode. In order to improve the directivity of microstrip directional coupler, a novel re-entrant mode microstrip directional coupler was employed. In microstrip configuration, the high directivity can be reached by matching the even- and odd-mode effective phase velocities. Through the values of capacitance obtained from 2-dimensional FE calculations, the phase velocities for each mode and the design parameter were extracted for the proposed parallel coupled-line configuration. Based on the extracted design parameter with phase matching condition, we designed and fabricated a 30dB directional coupler at 0.85GHz. Experimental results show good performance with excellent, isolation and directivity.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.11C no.4
• /
• pp.150-154
• /
• 2001

In this paper, we presented a novel structure of microstrip directional coupler for realizing the high directivity characteristic and tight coupling. The achievement of the high directivity with microstrip configuration was carried out by matching the even and odd mode effective phase velocities. By using 2-dimensional finite element (FE) calculations, the phase velocity for each mode and design parameters were extracted for given dimensions. Based on the extracted design parameter with phase-matched condition, we designed and fabricated 3dB and 4.7dB directional coupler at 2.0GHz. Experimental results of microstrip coupler show good performance with excellent isolation characteristics.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.2
• /
• pp.13-18
• /
• 1998

In this paper, a new type microstrip directional coupler has been designed and a 3dB coupler has been fabricated and measured. The measured and analysed results are agree well each other except difference of 1 dB insertion loss. There are two eigenmodes, e.g. even and odd mode in coupled microstrip lines. By using the difference between these two eigenmodes phase constants, the directional coupler can be designed by adjusting coupling length, which has a desired coupler has a disdvantage that its coupling length is longer than conventional oe, but it may be used as a useful coupler in millimeter wave range. And it has the merit of less discontinuity effects, becuase it is simpler than the other couplers in structure.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.9
• /
• pp.55-59
• /
• 2008

In this paper, the linearity of Doherty amplifier has been improved by applying a compact slow-wave microstrip branch-line coupler on the output of Doherty amplifier. The proposed branch coupler has four microstrip high-low impedance resonant cells periodically placed inside the branch-line coupler to result in high slow-wave effect. The new coupler not only effectively reduces the occupied area to 30% of the conventional branch-line coupler at 1.8GHz, but also has high second harmonic suppression performance. We obtained the 3rd-order intermodulation distortion ($IMD_3$) of -31.16 dBc for CDMA applications with that of maintaining the constant power added efficiency (PAE). The IMD3 performance is improved as much as -7 dBc compared with a Doherty amplifier.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.4C no.6
• /
• pp.276-281
• /
• 2004

In this paper, the optimal design of a novel microstrip directional coupler with a grooved housing for high directivity characteristic is presented. It will be shown that the high directivity of the microstrip coupler can be achieved simply by attaching an optimized housing structure. over the microstrip, which is much easier to fabricate than other conventional types. The dimensions of the proposed structure are maximized by using (1+1) evolution strategy (ES) combined with the deterministic algorithm. To improve the effectiveness of the results, efficient optimization procedures suitable for the model are proposed. From these results, it is determined that the proposed structure indicates an improved directivity. The optimized results are verified by full wave analysis at the center frequency of 850MHz.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.658-663
• /
• 2013

In this paper, a microstrip line implementation using via transition and its application of multilayer compact ring hybrid coupler are presented. This transition is the sandwich structure with via hole to connect two microstrip lines in different layer. For designing a compact RF/Microwave passive circuit, the microstrip line using via-hole transition is proposed to reduce a size of microwave circuit with long transmission line. For the validation of the microstrip line with via-hole transition, the multilayer ring hybrid coupler is implemented at center frequency of 2 GHz. The measured performances are in good agreement with simulation results and about 50% size reduction compare to conventional ring hybrid coupler.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.11
• /
• pp.1164-1171
• /
• 2014

Bulk Current Injection(BCI) test is a method of injecting current into Integrated Circuit(IC) using a current injection probe to qualify the standards of Electromagnetic Compatibility(EMC). This paper, we propose a microstrip coupler structure that can replace the BCI current injection probe that is used to inject a RF noise in standard IEC 62132-part 3 documented by International Electrotechnical Commission. Conventional high cost BCI probe has mostly been used in testing automotive ICs that use high supply voltage. We propose a compact microstrip coupler which is suitable for immunity testing of low power ICs. We tested its validity to replace the BCI injection probe from 100 MHz to 1,000 MHz. We compared the power[dBm] that is needed to generate the same level of noise between current injection probe and microstrip coupler by sweeping the frequency. Results show that microstrip coupler can inject the same level of noise into ICs for immunity test with less power.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.17 no.1
• /
• pp.10-16
• /
• 2024

Microstrip directional couplers using microstrip lines do not have good directivity characteristics because the dielectric constant of the substrate is different from that of air. To solve this problem, a compensation capacitor is sometimes attached between the coupling lines to improve directivity. This paper proposes a directional coupler with high directivity using interdigital capacitors implemented with transmission lines instead of lumped capacitors. The directional coupler designed and fabricated using the proposed method showed a coupling factor of 20 dB and a directivity of higher than 30 dB at 2.14 GHz. This directional coupler can be used as two directional couplers because it has two coupling ports and two isolated ports.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.2
• /
• pp.286-291
• /
• 2011

Directional couplers are widely used in RF and microwave applications to distribute or monitor signals. This paper presented a new structure of microstrip branch line directional coupler with coupled lines. The loose couplings of microstrip branch line directional couplers are impractical for the high characteristic impedance values required for the shunt branches. To overcome this limitation, the parallel coupled lines with the shorts were used for the high characteristic impedance. The results of the simulations and measurements were presented for the proposed branch line directional coupler. Measurement of the 10 dB branch line directional coupler shows that the return loss is higher than 30 dB over 10 % bandwidth and the isolation is 35 dB or better over 8 % bandwidth.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.48 no.6
• /
• pp.489-493
• /
• 1999

In this paper, an analysis of microstrip-slotline transition is performed using a 3D vector Finite Element Method(FEM). Artificial anistropic absorber technique is employed to implement an matching boundary condition in FEM. On the base of the analysis, power divider/combiner is designed. The structure of the power combiner already developed are Branch-line coupler, Rat-race coupler, Wilkinson coupler, Lange coupler, etc. Which are all planar, If the frequency goes up, the coupling efficiency of these planar couplers is decreased on account of skin loss. Especially, in millimeter-wave band, the efficiency of more than two ways combiner is radically reduced, so that application in power amplifier circuit is almost impossible, Microstrip-slotline transition structure is a power combining technique integrated into wave-guide, so that the loss is small and the efficiency is high. Theoretically, we can mount several transistors into the power-combiner. This makes it possible to develop a high power amplifier. The numerically calculated performances of the device that is, we believe, the best are compared to the experimental results in Ka-Band(26.5GHz-40GHz).