• 한국정보과학회논문지:시스템및이론
• /
• 제35권6호
• /
• pp.284-292
• /
• 2008

메모리 기술이 발달함에 따라 메모리의 집적도가 증가하게 되었고, 그에 따라 구성요소들의 크기가 작아지게 되고, 고장의 감응성이 증가하게 되어, 테스트는 더욱 복잡하게 된다. 또한, 칩 하나에 포함되어 있는 저장요소가 늘어남에 따라 테스트 시간도 증가하게 된다. SoC 기술의 발달로 대용량의 내장 메모리를 통합할 수 있게 되었지만, 테스트 과정은 복잡하게 되어 외부 테스트 환경에서는 내장 메모리를 테스트하기 어렵게 되었다. 본 논문은 ARM 프로세서 기반의 SoC 환경에서의 임베디드 메모리를 테스트할 수 있는 프로그램 가능한 메모리 내장 자체 테스트를 제안한다.

• International Journal of Aeronautical and Space Sciences
• /
• 제17권2호
• /
• pp.222-231
• /
• 2016

This paper proposes a new method achieving computationally efficient attitude reference system for low cost strapdown sensors and microprocessor platform. The main idea in this method is to define and compare velocity differential vectors, geometrically computed from INS and GPS data with different update rate, for generating attitude error measurements which is further used for filter construction. A quaternion based Kalman filter configuration is applied for the attitude estimation with the adapted measurement model of differential vector comparison. Linearized model for Extended Kalman Filter and low pass filtered characteristics of measurement greatly extend the affordability of the proposed algorithm to the field of simple low cost embedded systems. For performance verification, experiment are done employing a practical low cost MEMS IMU and GPS receiver specification. Performance comparison with a high grade navigation system demonstrated good estimation result.

• 한국산업융합학회 논문집
• /
• 제18권4호
• /
• pp.250-258
• /
• 2015

In this research, we proposed a new approach to implement the real-time motion control of biped robot based on voice command for unmanned FA. Voice is one of convenient methods to communicate between human and robots. To command a lot of robot task by voice, voice of the same number have to be able to be recognition voice is, the higher the time of recognition is. In this paper, a practical voice recognition system which can recognition a lot of task commands is proposed. The proposed system consists of a general purpose microprocessor and a useful voice recognition processor which can recognize a limited number of voice patterns. Given biped robots, each robot task is, classified and organized such that the number of robot tasks under each directory is net more than the maximum recognition number of the voice recognition processor so that robot tasks under each directory can be distinguished by the voice recognition command. By simulation and experiment, it was illustrated the reliability of voice recognition rates for application of the manufacturing process.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2289-2291
• /
• 2002

In maned airport, crews may have risks as they manage passenger control system in IPMS in damage situations such as fire in a airport. So the application of unmanned autonomous system can reduce the number of boarding crews and attribute to safe airplane transportation. PBBC model can be used to obtain control strategy, and airplane and enhance operators' skill by simulating the airport. The paper suggests an intelligent system of the pbbc control using microprocessor in integrated platform management system which can take measures against passenger situation of a airplane excluding unnecessary warnings with undamaged situations. The system here detected the passenger more accurately and adopted more appriate measures according to airplane status compared with conventional systems.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2357-2360
• /
• 2002

For the satisfying performance of a oil lubricator, design of a oil controller for the system which meets the required specifications and its supporting hardware that keep their functioning is important. Among the hardware of a control system, oil system are most vulnerable to malfunction. Thus it is necessary to keep track of accurate and reliable oil readings for good fusion oil lubricator performance. In case of oil lubricator, data loss, ssr trigger error faults, they are detected by examining the data system output values and the major values of the system, and then the faults are recognized by the analysis of symptoms of faults. If necessary electronic-sensor values are synthesized according to the types of faults, and then they are used for the controller instead of the raw data. In this paper, a fast-32bit cpu microprocessor applied to the control of flexible link system with the sensor fault problems in the error modulo for exact positioning to show the applicability. It is shown that the fusion oil lubricator can provide a satisfactory loop performance even when the sensor faults occure.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 하계학술대회 논문집 A
• /
• pp.39-42
• /
• 1994

The application of speed or position control technique in AC drives demands accurate position and velocity feedback information. Generally, resolver and absolute encoders are used as a velocity or position sensor. But they increase cost and when the sampling frequency is faster than sensoer's output frequency we can't Set exact information. In order to solve this problem this thesis proposes a speed and a position observer design for Permanent-Magnet Synchronous Motors(PMSM) specialty in low speed drives. Most literatures on this topic design the observer based on the field_oriented d_q model. But in this thesis, a new approach to machine dynamics is proposed. Since it is difficult to design the observer using the nonlinear model, the machine model is here linearlized at the operating point. The observer designed is implemented by software using Intel's 8097 microprocessor and verifies the proper performance of observer by simulation and experiment.

• Journal of Magnetics
• /
• 제19권2호
• /
• pp.197-204
• /
• 2014

A transcranial magnetic stimulation device is a complicated appliance that employs a switching power device designed for discharging and charging a capacitor to more than 1 kV. For a simple transcranial magnetic stimulation device, this study used commercial power and controlled the firing angle using a Triac power device. AC 220V 60 Hz, the power device was used directly on the tanscranial magnetic stimulation device. The power supply device does not require a current limiting resistance in the rectifying device, energy storage capacitor or discharge circuit. To control the output power of the tanscranial magnetic stimulation device, the pulse repetition rate was regulated at 60 Hz. The change trigger of the Triac gate could be varied from $45^{\circ}$ to $135^{\circ}$. The AVR 182 (Zero Cross Detector) Chip and AVR one chip microprocessor could control the gate signal of the Triac precisely. The stimulation frequency of 50 Hz could be implemented when the initial charging voltage Vi was 1,000 V. The amplitude, pulse duration, frequency stimulation, train duration and power consumption was 0.1-2.2T, $250{\sim}300{\mu}s$, 0.1-60 Hz, 1-100 Sec and < 1 kW, respectively. Based on the results of this study, TMS can be an effective method of treating dysfunction and improving function of brain cells in brain damage caused by ischemia.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.822-828
• /
• 2018

AC-DC conversion is a necessary for the systems that require DC source. This conversion has been done via rectifiers based on controlled or uncontrolled semiconductor switches. Advances in the power electronics and microprocessor technologies allowed the use of Pulse Width Modulation (PWM) rectifiers. In this paper, dq-axis current and DC link voltage of three-phase PWM rectifier are controlled by using type-2 fuzzy neural network (T2FNN) controller. For this aim, a simulation model is built by MATLAB/Simulink software. The model is tested under three different operating conditions. The parameters of T2FNN is updated online by using back-propagation algorithm. The results obtained from both T2FNN and Proportional + Integral + Derivate (PID) controller are given for three operating conditions. The results show that three-phase PWM rectifier using T2FNN provides a superior performance under all operating conditions when compared with PID controller.

• 한국산업정보학회:학술대회논문집
• /
• 한국산업정보학회 2006년도 춘계 국제학술대회 논문집
• /
• pp.119-123
• /
• 2006

본 논문에서는 마이크로프로세서의 기능을 수행하는 데 필수적이며 사용빈도가 높은 총 64개의 명령어를 정의한 후 이를 처리할 데이터패스를 구성해 스테이트 머쉰으로 제어하는 방식으로 실용적 8비트 마이크로프로세서를 VHDL로 설계를 하고 FPGA로 구현했다. 통상 마이크로프로세서 관련 논문에서는 기능적 시뮬레이션까지만 했거나, 인터럽트 기능이 없든지, 하드웨어로 구현을 하지 않았거나, 또는 개발 관련 내용이 자세히 제시되지 않았었다. 본 논문에서는 데이터 이동, 논리, 가산 연산뿐만 아니라 분기, 점프 연산도 실행할 수 있도록 해 연산 및 제어용도에 적합하도록 하였고, 스택, 외부 인터럽트 기능까지도 지원하도록 해 그 자체로서 완전한 실용적 마이크로프로세서가 되도록 하였다. 또한 프로그램 ROM까지도 칩 안에 넣어 전체 마이크로프로세서를 단일 칩으로 구현하였다. 타이밍 시뮬레이션으로 검증 후 제작 과정을 통해, 설계된 마이크로프로세서가 정상적으로 동작함을 확인하였다. Altera MAX+.PLUS II 통합개발환경 하에서 EP1K50TC144-3 FPGA 칩으로 구현을 하였고 최대 동작주파수는 9.39MHz까지 가능했고 사용한 로직 엘리먼트의 개수는 2813개로서 논리 사용률은 97%이었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.421-426
• /
• 2004

Analyzing adaptive possibilities of agents in multi-agents system, we have discovered new aspects of ambient intelligence in distributed modular systems using intelligent building blocks (I-BLOCKS) [1]. This paper describes early scientific researches related to technical design, applicable experiments and evaluation of adaptive processing and information interaction among I-BLOCKS allowing users to easily develop ambient intelligence applications. The processing technology presented in this paper is embedded inside each DUPLO1 brick by microprocessor as well as selected sensors and actuators in addition. Behaviors of an I-BLOCKS modular structure are defined by the internal processing functionality of each I-Blocks in such structure and communication capacities between I-BLOCKS. Users of the I-BLOCKS system can do 'programming by building' and thereby create specific functionalities of a modular structure of intelligent artefacts without the need to learn and use traditional programming language. From investigating different effects of modem artificial intelligence, I-BLOCKS we have developed might possibly contain potential possibilities for developing applications in ambient intelligence (AmI) environments. To illustrate these possibilities, the paper presents a range of different experimental scenarios in which I-BLOCKS have been used to set-up reconfigurable modular systems. The paper also reports briefly about earlier experiments of I-BLOCKS in different research fields, allowing users to construct AmI applications by a just defined concept of modular artefacts [3].