• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.2
• /
• pp.6-12
• /
• 1985

In this paper, self tuning control algorithm based on least square method is applied to the speed control of D.C. motor using Z-80 microprocessor as control unit. And the performance of algorithm is analyzed when the correlated noises of variance 20 and 80 are applied respectively. The convergence speed is measured and tracking is verified for the step and staircase wave reference input. Also it is shown that self tuning control algorithm is more attractive to the D.C. Totor speed control system regardless of power supply voltage and friction load changes than linear feedback control method which doesn't estimate parameters.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.22 no.2
• /
• pp.55-59
• /
• 1985

The measurement of the silent period of Masseter muscle is very useful diagnostic method of TMJ syndrome. In this paper, we design a very convenient and very low-priced medical instrument for dental research which does not need gain control to each patient for measuring the silent period and the data processing time is very short. The result of SP measurement using this instrument is 20-30ms in normal subjects and about 60ms in TMJ patient, and the data processing time is 0.5 second.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.13 no.2
• /
• pp.160-170
• /
• 1988

This paper describes the outboard NIU(Network Interface Unit) using microprocessor and the hardware and software of concentrator for constructing star typed LAN(Local Area Network) based on token ring method. The NIU adapter can adapter up to four parallel and serial typed terminals. Because it has PAD function on input output data, any type of terminals can be adapted. Since the concentrator has logical switching circuit which enables data to bypass the faulted NIU adapter, this network prevents communication break. When user transmits and receives data, the concentrator constructs star typed LAN which connct both transmitting and receiving sides. A s result, this network eliminated ring latency time in other NIU exculding transmitting and receiving NIU. So the throughput of this LAN is increased. Because this LAN system consists of several modultes according to it's function, the expansion of function or the modification of method is easy.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.51 no.5
• /
• pp.175-181
• /
• 2002

In this paper, fault tolerant digital governor is designed to realize ceaseless controlling and to improve the reliability of control system. Designed digital governor huts duplex I/O module and triplex CPU module and also 2 out of 3 voting algorithm and self diagnostic ability. The Processor module of the system(SIDG-3000) is developed based on 32 Bit industrial microprocessor, which guaranteed high quality of the module and SRAM for data also SRAM for command are separated. The process module also includes inter process communication function and power back up function (SRAM for back-up). System reliability is estimated by using the model of Markov process. It is shown that the reliability of triplex system in mission time can be dramatically improved compared with a single control system Designed digital governor system is applied after modelling of the steam turbine generator system of Buk-Cheju Thermal Power Plant. Simulation is carried out to prove the effectiveness of the designed digital governor system

• 제어로봇시스템학회:학술대회논문집
• /
• 1988.10a
• /
• pp.353-359
• /
• 1988

In this paper, the design and implementation of a multi-processor based die bonder machine for the semiconductor will be described. This is a final research results carried out for two years from June, 1986 to July, 1988. The mechanical system consists of three subsystems such as bonding head module, wafer feeding module, and lead frame feeding module. The overall control system consists of the following three subsystems each of which employs a 16 bit microprocessor MC 68000 : (i) supervisory control system, (ii) visual recognition / inspection system and (iii) the display system. Specifically, the supervisory control system supervises the whole sequence of die bonder machine, performs a self-diagnostics while it controls the bonding head module according to the prespecified bonding cycle. The vision system recognizes the die to inspect the die quality and deviation / orientation of a die with respect to a reference position, while it controls the wafer feeding module. Finally, the display system performs a character display, image display ans various error messages to communicate with operator. Lead frame feeding module is controlled by this subsystem. It is reported that the proposed control system were applied to an engineering sample and tested in real-time, and the results are sucessful as an engineering sample phase.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.1
• /
• pp.78-87
• /
• 1989

In this paper, a spatio-temporal gradient (STG) method with generalized least square estimation (GLSE) is proposed for the detection of an object motion in an image sequence corrupted by white Gaussian noise. The proposed method is applied to an automatic target tracker using a high speed 16-bit microprocessor in order to track one moving target in real time. Experimental results show that the proposed method has much better performance over the conventional one with least square estimation (LSE).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.11 s.353
• /
• pp.19-25
• /
• 2006

The fast processing ability of an RTOS (Real Time Operating System) is one of important factors in determining the performance of embedded systems. With the development of multimedia and telecommunication technology, the higher level of performance environments is required. Moreover there is some difficulty in improving the performance of an RTOS which is based on a microprocessor. In this paper, we propose a hardware architecture to implement some functions of uC/OS-II as a target RTOS for the purpose of its performance improvement. The proposed architecture for uC/OS-II is implemented and analyzed with the performance comparison.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.06a
• /
• pp.1042-1045
• /
• 2003

In this paper, we present a new method for the monitoring of Electric Control Unit's(ECU) self-diagnostic and the sensor signals of vehicle through Web. In order to measure the ECU's self-diagnostic and sensor signals, the interfaced circuit is designed to communicate ECU and terminal according to the ISO, SAE regulation of communication protocol standard. Microprocessor 80C196KC is used for communicating ECU's self-diagnostic signals and the results are sent to the Embedded Linux System(ELS) through RF module. ELS is developed by SA1110, RF module, Embedded Linux. All commands related in ECU communication are executed through Web. The CGI program composed in web server is executed by user and will return sensor signals from ECU Software on Embedded Linux system is developed to monitor the ECU's sensor signals using the arm compiler tool chain in which RS232 port is programmed by half duplex method. The possibility for remote measurement of ECU sensor signal through Web is verified through the developed systems and algorithms.

• Journal of KSNVE
• /
• v.9 no.1
• /
• pp.121-130
• /
• 1999

Generally, A Dynamic Absorber by using Active viscous Damping is highlighted for effective suspension system, such as improved ride comfort and handling in the market. Lately, this system based on the Sky-Hook damper theory is introduced by the name of "Active Dynamic Absorber" to us. This system has an excellent performance in contrast to Passive. Adaptive Dynamic Absorber, besides having low cost components of system, low energy consumption. light weight of system. In this viewpoint. most of car-maker will adopt this system in the near future. For this reason, we developed Dynamic Absorber by using Active viscous Damping which is equipped with continuously variable Dynamic Absorber and Control logic consisting Filter and Estimator. control apparatus of Dynamic Absorber operated by 16-bit microprocessor of high performance. variable device of viscous Damping. G-sensor so on. In this paper. several important points of development procedure for realizing this system will be described with results in which is obtained from experiment by simulation and Full car test in Proving ground. respectively.pectively.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.2
• /
• pp.57-65
• /
• 2008

Wireless sensor networks achieve environment monitoring and controlling through use of small devices of low cost and low power. Such network is comprised of several sensor nodes, each having a microprocessor, sensor, actuator and wired/wireless transceiver inside a small device. In this paper, we employ the sensor networks in order to design and implement a real-time vehicle safety system. Such system can inform the safe velocity in a specific weather condition to drivers in advance through analyzing the weather data collected from sensor networks. As a result, the drivers can prevent effectively accidents by controlling their car speed.