• Journal of Microbiology and Biotechnology
• /
• v.9 no.3
• /
• pp.340-345
• /
• 1999

A novel simultaneous saccharification and fermentation (SSF) process from the microcrystalline cellulose to ethanol was developed by using $\delta$-integrated recombinant cellulolytic Saccharomyces cerevisiae L2612$L2612\deltaGC$, which can utilize cellulose as carbon and energy sources. The optimum amount of enzymes needed for the efficient conversion of cellulose to ethanol at $30^{\circ}C$ was determined with commercial cellulolytic enzymes. By fed-batch cultivation, the heterologous cellulolytic enzymes were accumulated up to 42.67% of the total cellulase and 29% of the $\beta$-glucosidase needed for the efficient SSF process. When this $\delta$-integrated recombinant yeast was applied to the successive SSF step for ethanol production, 20.35 g/l of ethanol was produced after 12 h from 50 g/l of microcrystalline cellulose. By using this novel SSF process, a considerable amount of commercial enzymes was reduced.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.3
• /
• pp.300-305
• /
• 1997

Effect of a nonionic surfactant, Tween 20 on the adsorption and kinetic mechanism for the hydrolysis of a microcrystalline cellulose, Avicel PH 101, by endoglucanase Ⅰ (Endo Ⅰ) and exoglucanase Ⅱ (Exo Ⅱ) isolated from Trichoderma viride were studied. The Langmuir isotherm parameters, amount of maximum adsorption (Amax) and adsorption equilibrium constant (Kad) for the adsorption, were obtained in the presence and the absence of nonionic surfactant. On the addition of Tween 20, the Kad and Amax values of Exo Ⅱ were decreased, while those of Endo Ⅰ were not affected. These indicate that the adsorption affinity of Exo Ⅱ on the cellulose is weakened by nonionic surfactant, and the surfactant enhanced desorption of Exo Ⅱ from insoluble substrate. The enzymatic hydrolysis of the cellulose can be described by two parallel pseudo-first order reactions using the percentages of easily (Ca) and hardly (Cb) hydrolyzable cellulose in Avicel PH 101 and associated rate constants (ka and kb). The Ca value was increased by adding Tween 20 for all enzyme samples (Exo Ⅱ, Endo Ⅰ and their 1:1 mixture) implying that the low-ordered crystalline fraction in the cellulose may be partly dispersed by surfactant. The ka value was not affect by adding Tween 20 for all enzyme samples (Exo Ⅱ, Endo Ⅰ and their 1:1 mixture). The kb value of Exo Ⅱ was increased by adding Tween 20, while that of Endo Ⅰ was not affected. This suggests that the surfactant helps the Exo Ⅱ desorb from microcrystalline cellulose, and increase the hydrolysis rate. These results were show that the increase of hydrolysis of cellulose by the nonionic surfactant is due to both the activation of Exo Ⅱ and partial defibrillation of the cellulose.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.3
• /
• pp.157-162
• /
• 2008

The aim of the study was to formulate the stable amlodipine maleate tablet by selecting and combining of suitable ingredients. Amlodipine tablets were designed by using different manufacturing methods or formulations. Dissolution rate at 30 min of newly formulated tablets was over 98% in 0.1 M HCl medium. After 4 months storage under accelerated condition, the changes of appearance, loss on drying, content and total impurity were investigated. For long-term stability tests, two formulations of K017 (direct compressed tablets consisting of microcrystalline cellulose and pregelatinized starch) and K018 (wet granulated tablets by OpadryAMB) were stored under $25^{\circ}C$, 60% RH for 24 months. Under the accelerated condition, moisture content in K017 formulation was increased as 5.96% for 4 months, while other formulations with anhydrous monobasic phosphoric potassium or by wet granulation showed higher increase in moisture content compared to K017. In addition, K017 formulation showed a low decrease in contents and total relative substance as 0.8% and 0.7%, respectively. Similar stability of amlodipine in K017 was obtained under the long-term stability test. These results indicate that the K017 combined with microcrystalline cellulose and pregelatinized starch as ingredients is very stable formulation to protect active substance from moisture contact and sustain stability. Therefore, suitable combination of ingredients such as microcrystalline cellulose and pregelatinized starch could attribute to enhance the stability of moisture-labile drug such as amlodipine maleate.

• YAKHAK HOEJI
• /
• v.18 no.4
• /
• pp.236-242
• /
• 1974

Extrusion-spheronization processing combination was used to produce spherical granules with experimental formulations which contain microcrystalline cellulose as a diluent. The produced granules were compared on the basis of the following physical properties ; (a) bulk density, (e) porosity, (f) friabillity and (g) dissolution rate. With the specific experimental formulations used in this study, the increased plate rotational speeds of Marumerizer (400-1200rpm) produced continually more spherical material and also the obtained data indicated that the particle size distribution and dissolution rate depend upon the amount of microcrystalline cellulose used. As a result, the spherical granule preparation with microcrystalline cellulose has good properties in flow rate, packing propertyu and friability and offers a suitable method of granule preparation in pharmaceutical industry.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.1
• /
• pp.1-8
• /
• 2008

Planetary ball mill was used to decrease and control the particle size of excipients. The effects of the weight of sample and the revolution number of mill, and grinding time on the particle size of the ground sample were analyzed by response surface methodology. The optimum conditions for the milling of microcrystalline cellulose were 38.82 g of the weight of sample and 259 rpm of the revolution number of mill, and 45 minutes of grinding time. The predicted value of the particle size at the these conditions was $19.02{\mu}m$, of which the experimental value at the similar conditions was $18.68{\mu}m$. The tensile strength of tablets of single-component powders, such as microcrystalline cellulose, hydroxypropylmethyl cellulose and starch, binary mixtures and ground binary mixtures of these powder were measured at various relative densities. It was found that the logarithm of the tensile strength of the tablets was proportional to the relative density. A simple model, based upon Ryshkewitch-Duckworth equation that was originally proposed for porous materials, has been developed in order to predict the relationship between the tensile strength and relative density of ground binary tablets based on the properties of the constituent single-component powders. The validity of the model has been verified with experimental results for ground binary mixtures. It has demonstrated that this model can well predict the tensile strength of ground binary mixtures based upon the properties of single-component powders, such as true density, and the compositions. When the tensile strength of the mixture of microcrystalline cellulose hydroxypropylmethyl cellulose (90:10) and the ground mixture of them were compared, the tensile strength of the ground mixture decreased widely from 45.3 to 5.6% compared to the mixture in case the relative density of tablets was in the range of $0.7{\sim}0.9$. When the tensile strength of the mixture of microcrystalline cellulose starch (80:20) and the ground mixture of them were compared, the tensile strength of the ground mixture decreased widely from 31.0 to 11.6% compared to the mixture in case the relative density of tablets was in the range of $0.7{\sim}0.9$.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.5
• /
• pp.800-805
• /
• 2007

Two endoglucanases with processive cellulase activities, produced from Fomitopsis palustris grown on 2% microcrystalline cellulose(Avicel), were purified to homogeneity by anion-exchange and gel filtration column chromatography systems. SDS-PAGE analysis indicated that the molecular masses of the purified enzymes were 47 kDa and 35 kDa, respectively. The amino acid sequence analysis of the 47-kDa protein(EG47) showed a sequence similarity with fungal glycoside hydrolase family 5 endoglucanase from the white-rot fungus Phanerochaete chrysosporium. N-terminal and internal amino acid sequences of the 35-kDa protein(EG35), however, had no homology with any other glycosylhydrolases, although the enzyme had high specific activity against carboxymethyl cellulose, which is a typical substrate for endoglucanases. The initial rate of Avicel hydrolysis by EG35 was relatively fast for 48 h, and the amount of soluble reducing sugar released after 96 h was $100{\mu}g/ml$. Although EG47 also hydrolyzed Avicel, the hydrolysis rate was lower than that of EG35. Thin layer chromatography analysis of the hydrolysis products released from Avicel indicated that the main product was cellobiose, suggesting that the brown-rot fungus possesses processive EGs capable of degrading crystalline cellulose.

• Journal of Life Science
• /
• v.33 no.3
• /
• pp.268-276
• /
• 2023

This study was conducted to optimize the formulation conditions of the immediate-release layer of carvedilol in the development of a two-layer tablet formulation for carvedilol and ivabradine. Using a 2⁴+3 full-factorial design of experiments, excipients (microcrystalline cellulose, citric acid, and crospovidone) of the carvedilol immediate-release layer (wet granulation part) and process parameters for the tablet compression process (main compression) were optimized, and seven types of each dependent variable (assay, content uniformity, hardness, friability, disintegration, and dissolution [pH 1.2 and 6.8]) were evaluated using design expert software. The analysis of variance results confirmed that the main compression has a significant effect on hardness, friability, and disintegration time and that microcrystalline cellulose has a major effect on friability and dissolution. In addition, it was confirmed that citric acid has a significant effect on friability. Crospovidone affects friability and dissolution. According to the design space from the design of the experiment results, the optimized range is microcrystalline cellulose (~18.0-32.0 mg), citric acid (~0.5-12 mg), and main compression (~615-837 kgf). Consequently, this study confirmed the availability of manufacturing the carvedilol immediate-release layer in which all risk factors evaluated in the initial risk assessment are removed.

• Journal of Pharmaceutical Investigation
• /
• v.14 no.4
• /
• pp.161-169
• /
• 1984

The tests of dissolution and bioavailability of six formulas of lorazepam tablet under various binders were performed. Lorazepam can be seperated in pharmaceutical preparation and biological plasma by high performance liquid chromatograph. Dissolution process of lorazepam tablet was largely influenced by binder and the dissolution rate was increased by sodium starch glycolate and microcrystalline cellulose, the slower dissolution rate in starch. Bioavailability of lorazepam tablet got relationship with dissolution rate, because tablets containing sodium starch glycolate and microcrystalline cellulose as binder maintained higher plasma level than other binders.

• Journal of the Korean Applied Science and Technology
• /
• v.25 no.4
• /
• pp.459-468
• /
• 2008

Methyl methacrylate(MMA) was grafted onto microcrystalline cellulose(MCC) with ceric ammonium nitrate(CAN) as a redox initiator at the various conditions. The cellulose triacetate(CTA) composite films added MCC and MMA-grafted MCC powders were prepared on a glass plate. The graft yield(GY) and graft efficiency(GE) of the grafted MCC were calculated with the simple equations by the weight balance method. The double bond of C=O on the grafted MCC surfaces was confirmed by the fourier transform infrared spectroscopy with attenuated total reflection(FT-IT ATR) spectrophotometer. After grafting, the degree of crystallinity of cellulose powders was decresed by judging from x-ray diffraction(XRD) data. Scanning electron microscope(SEM) photos showed the only solvent and CAN solution could change the roughness of MCC powders and the effect of powder dispersions in composite matrix. The tensile strength of MCC/CTA composite films was decreased with increase of MCC powder contents. When 5% grafted MCC was added, the tensile strength of grafted MCC/CTA composite films was increased from 82.3 MPa to 97.2 MPa. The thermal property of powders was also analyzed by the thermogravimetric analysis(TGA).

• Elastomers and Composites
• /
• v.45 no.1
• /
• pp.51-57
• /
• 2010

Cellulose nanowhiskers (CNW) gamered increasing interest for their remarkable reinforcement of polymer composites. In this work, we were to produce cellulose whiskers from commercially available microcrystalline cellulose (MCC) by acid hydrolysis with sulfuric and hydrochloric acids. Electron microscopy found that each acid produced sililar cellulose crystals of diameters ranging from 20 to 30 nm and lengths ranging from 200 to 300 nm. Moreover, all samples showed remarkable flow birefringence through crossed polarization filters. Conductometric titration of CNW suspensions revealed that the sulfuric acid treated sample had a surface charge of between 140.00 mmol/kg and 197.78 mmol/kg due to sulfate groups, while that of the hydrochloric acid treated sample was undetectable. Thermogravimetric analysis showed that the thermal decomposition temperature and apparent activation energy (evaluated by Broido's method at different stages of thermal decomposition.) of H1-CNW - prepared by hydrolysis with hydrochloric acid - was higher than those of S1-CNW and S2-CNW - prepared by hydrolyzing MCC with sulfuric acid.