• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.123-125
• /
• 2004

The importance for Internet security has being increased and the Internet Protocol Security (IPSec) standard, which incorporates cryptographic algorithms, has been developed as one solution to this problem. IPSec provides security services in IP-Layer using IP Authentication Header (AH) and IP Encapsulation Security Payload (ESP). In this paper, we propose IPSec cryptographic processor design based AMBA architecture. Our design which is comprised Rijndael cryptographic algorithm and HAMC-SHA-1 authentication algorithm supports the cryptographic requirements of IP AH, IP ESP, and any combination of these two protocols. Also, our IPSec cryptographic processor operates as AMBA AHB Slave. We designed IPSec cryptographic processor using Xilinx ISE 5.2i and VHDL, and implemented our design using Xilinx's FPGA Vertex XCV600E.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.568-570
• /
• 2004

This paper presents a study of a position finding system using PSD Sensor and Pan/Tilt. The position of PSD(Position Sensitive Detector) sensor is calculated by the degree of pan-tilt and the difference in height between pan-tilt and PSD. For that, the DSP which control pan-tilt is used for precise operation. The PIC microcontroller process PSD sensor data that indicate light incident position. A user using computer can acquire the conditions of pan-tilt and PSD and issue an order.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.849-852
• /
• 2001

본 눈문에서는 뒤틀림, 응력, 압력[1], 토크, 가속도 등의 물리적인 동적 현상을 측정하여 수집된 데이터를 처리하기 위한 신호처리(Signal Processins) 기능이 결합되어 넓은 용도로 활용할 수 있는 센서 신호 수집 시스템을 구현하였다. 구현된 시스템은 data acquisition board 의 하드웨어와 소프트웨어로 나누어 볼 수 있다. 하드웨어의 구성은 아날로그부, 디지털부, 그리고 시스템 인터페이스 처리부로 되어 있다. 아날로그부에서는 센서신호를 받아서, PGA (Programmable Gain Amplifier)[2]와 Op-Amp를 사용하여 signal conditioning 처리하여 8차 Lowpass Filter 로 보낸다. Filtering 된 신호는 ADC (Analog to Digital Converter) 가 내장되어 있는 PIC(3) microcontroller로 보내져 AD변환과 디지털 신호 처리를 한다. 처리된 신호는 RS232 인터페이스를 통해 호스트 컴퓨터로 보내 사용자가 분석할 수 있도록 한다. 또한 LCD display 실시간으로 확인, 분석할 수 있으며 동시에analog output에서 센서신호의 특징을 분석 할 수 있도록 한다.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.600-602
• /
• 1996

The purpose of this paper is to develop a new maximum power point tracking(MPPT) using fuzzy set theory for air conditioning system. Fuzzy algorithm based on linguistic rules describing the operator's control strategy is applied to control step-up chopper for MPPT. Fuzzy algorithm is applied to control boost MPPT converter by temperature compensation effect with 8 bit single chip 8051 microcontroller. In this paper, temperature compensation(Becom Transducer : pf-T type) range is $-40^{\circ}C{\sim}+100^{\circ}C$.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.8 no.5
• /
• pp.30-35
• /
• 1999

Since LPG has a higher octane number and a lower maximum combustion temperature than gasoline it is getting more popular for reducing emissions from the vehicle This paper when an LPG engine works in the range of idle analyzed the operating range preciously an provides reducing method of emissions for the LPG engine. An electronic control unit(ECU) for the LPG engine using a feedback mixer is presented. The ECU is built by using a microcontroller MC68HC05. A PI-controller is imple-mented in the ECU in order to handle to handle Air/Fuel ration control. The experimental results exhibit that the required engine performance are satisfied at idle.

• Journal of Sensor Science and Technology
• /
• v.18 no.1
• /
• pp.22-27
• /
• 2009

The GPS(global positioning system) made up of 28 artificial satellites going round around the earth at a height of 20,000.Km is a system to determine the receiver's location by measuring the distance between the satellite and receivers using an electronic wave. Recently it's been widely used in various applications, such as a navigator, a surveying system, etc. In this paper, we propose a new algorithm to transform coordinates from GPS signals corresponding to various sizes of maps, and the application using this algorithm is also introduced. The algorithm is programmed by MFC on the WinCE 5.0 operating system, and the GPS receiver with a 20 channel high sensitivity and GPS microcontroller chip manufactured by SiRF Technology was used.

• New & Renewable Energy
• /
• v.3 no.4
• /
• pp.69-76
• /
• 2007

In this paper, a PV multi-string PCS with a grid-connection is proposed. An improved MPPT algorithm for the PV multi-string PCS is suggested. Each PV string has its own MPP tracker and the proposed MPPT algorithm prevents LMPP tracking due to power ripple. In the PV PCS with single-phase inverter has a large current ripple at twice the grid frequency. The current ripple reduction algorithm without external component is suggested. Also, this paper proposes a simple control method to achieve sharing of the PV string voltage and current among the interleaved parallel boost converters. All algorithms and controllers are implemented on a single-chip microcontroller. Experimental results obtained on a 3kW prototype show high performance of the proposed PV multi-string PCS.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2001.10a
• /
• pp.286-290
• /
• 2001

This paper presents a full-digital low-level controller for a robotic material transfer system which has been developed for a computer-integrated manufacturing model plant. Compared to conventional analog or hybrid type controllers in current industrial environments, this controller system has some advantages such as strong noise-immunity, easy control algorithm implementation, etc The servo-controller consists of two modules, a position controller and a DC servo motor driver. The position controller operates position feedback routines by receiving position encoder data and sending control outputs to the driver. The position controller is implemented in a full-digital way using a recently introduced microcontroller. The DC servomotor driver controls speeds and torques. The driver consists of a micro-controller and insulated-gate-bipolar-transistors (IGBT). The micro-controller provides control signals, and the IGBT's amplifies the control signals and sends them to the motor.

• Journal of electromagnetic engineering and science
• /
• v.16 no.4
• /
• pp.214-218
• /
• 2016

In this paper, we present an ambient light backscatter communication design that enables Internet of Things (IoT) devices to communicate through the backscattering ambient light emitted from lighting infrastructure or sunlight. The device can selectively modulate ambient light by switching a liquid crystal display (LCD) shutter located on its surface, so that a nearby smart device, which includes a photodiode or a camera, can demodulate this backscattered light information. To verify the practicality of the proposed concept, we design an IoT device equipped with a commercial LCD shutter and a microcontroller. Our device produces ambient light backscattered data at a speed of 100 bps, and these data are successfully decoded by a commercial photodiode module 10 cm away from the IoT device. We believe that our ambient light backscatter communication design is appropriate for implementation in various IoT applications.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.10 no.5
• /
• pp.637-644
• /
• 2015

Bicycles share the road where high speed cars run and driving license is essential to bicyclist. After sunset, accidents can be occurred due to changing one line to another line in a road inadequately and bicycle driving route changing without an alarm. In this paper, we apply the same system as an automatic signal lights system to prevent the accidents for bicyclist safety. Then, we verify it using proteus VSM simulation.