• Nuclear Engineering and Technology
• /
• 제17권4호
• /
• pp.302-316
• /
• 1985

TMI와 월성 사고 이후 PORV를 통한 Small LOCA는 원자력 발전소 리스크의 중요한 요소로 부각되었다. 본 논문에서는 이 계통을 통한 Pressurizer Surveillance System의 설제와 그에 따른 영향을 확률론적 리스크 평가(PBA) 방법으로 해석하였다. 마이크로 컴퓨터는 계통의 고장(Malfunction)을 공정 확인 방법(Process Checking Method)으로 진단하고 그 진단에 따른 후속 동작(Backup Action)을 자동으로 수행한다. 이러한 개선에 따라 운전원의 빠르고 정확한 판단이 어려웠던 “Spurious Opening”, “Fail to Reclose” 및 “Small Break LOCA” 등의 진상(Symptom) 이 정확히 진단되고, 후속 동작의 자동화로 인하여 인간 실수 확률이 기계적 실수 확률로 감소하게 되었다. 결국. 이러한 개선은 계통의 신뢰도 증가로 Small LOCA 확률의 감소를 가져다 준다.

• Journal of Biosystems Engineering
• /
• 제30권5호
• /
• pp.306-311
• /
• 2005

In this study, a biosensor was developed to rapidly diagnose the swine sarcoptic mange (Sarcoptes scabies var. suis). The ELISA was modified to reduce the processing time for rapid diagnosis. The biosensor consists of a biological reaction part, and a measurement and control part. The biological reaction part was designed for using micro-pumps and valves for fluid transportation, and the measurement control part composed of a photodiode, a light-emitting diode fur light measurement, and a microcomputer to implement assay A polystyrene covet was used as a reaction chamber. Signal output was read as the rate of change in optical density at 645nm. Eighteen pigs diagnosed with sacroptic mange and 19 control pigs were tested. Fifteen sacbies-infested pigs showed positive results ($83.3\%$ sensitivity). Sixteen control pigs showed negative results ($84.2\%$ specificity). The system could execute a diagnosis cycle in about 45 min. The results suggest that this biosensor is useful for the rapid diagnosis of swine sacroptic mange.

• Journal of Biosystems Engineering
• /
• 제14권3호
• /
• pp.207-214
• /
• 1989

In this study, impact force and angular displacement of the pendulum were measured by the load cell and potentiometer. Mechanical behavior of rough rice under impact loading was able to analyze precisely and efficiently, because measured data were accumulated and handled by the automatic data acquisition system making use of microcomputer system. Impact force and angular displacement were measured with a resolutiln of 1/1500 seconds in time. Mechanical behavior such as force and energy at rupture point of Japonica type and Indica type rough rice were measured with this system. After impact loading, the damage of rough rice was examined with the microphotograph and an allowable impact force was measured. The results obtained in this study are summarized as follows. 1. Machanical behavior of rough rice under impact loading was analyzed precisely and efficiently because measured data were accumulated and handled by this data acquisition system. 2. Rupture force and rupture energy of rough rice were appeared to be the lowest value in the range of 16 to 18 % moisture content, and rupture force and rupture energy of Japonica type were higher than those of Indica type in each level of moisture content. 3. From the result of the damage examined after the impact loading, allowable impact force was the lowest in the range of 16 to 18 % moisture content, and the value of the allowable impact force of Japonica type was higher than that of Indica type in each level of moisture content.

• 대한의용생체공학회:의공학회지
• /
• 제15권2호
• /
• pp.167-174
• /
• 1994

In this paper, a DSP and microcomputer-based EMG controlled functional electrical stimulation (FES) system, for restoring walking of paraplegics at the patients' own command, is presented. The above-lesion EMG is a time-varying nonstationary signal and its autoregressive (AR) parameters are identified by the nonstationary identification algorithm using a DSP chip. The identified AR parameters are used for the cloassification of the function and the control of the movement. The below-lesion response-EMG signal is used as a measure of muscle fatigue. This FES system is designed to measure muscle fatigue and control the stimulation intensity according to the amplitude of the response-EMG signal. While the automatic electrical intensity control is obtained by identifying the movement, the proposed FES system is suitable for the automatic control of paraplegic walking.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.180-182
• /
• 2001

Input Current Correction of Single-Phase Buck Rectifier is studied in the paper. To sinusoidal waveform the input current with a near-unity power factor over a wide variety of operating conditions, the output capacitor is operated with voltage reversibility for the supply by arranging the auxiliary diode and power switching device. Then the output voltage is superposed on the input voltage during on time duration of power switching devices in order to minimize the input current distortion caused by the small input voltage when changing the polarity. The tested setup, using two insulated-gate bipolar transistors(IGBT) and a microcomputer, is implemented and IGBT are switched with 20[kHz], which is out of the audible band. Moreover, a rigorous state-space analysis is introduced to predict the operation of the rectifier. The simulated results confirm that the input current can be sinusoidal waveform with a near-unity power factor and a satisfactory output voltage regulation can be achieved.

• 한국안전학회지
• /
• 제34권2호
• /
• pp.22-27
• /
• 2019

Bikers can be subjected to accidents during their bicycling. Helmets are only good, if any, for their head protection. A wearable airbag can protect the human neck area if it is properly designed. This airbag system is composed of an inflater and an airbag. The inflater contains a pressurized gas cylinder and a piercing device. The airbag is an inflatable fabric surrounding the human neck. When a bicycle accident happens, a sensor captures the motion of the biker and a microcomputer sends a signal to open a valve in the inflator to supply the pressurized gas to the airbag. An important issue of this system is that the airbag should be quickly inflated to protect the human neck. This paper deals with the airbag inflation time simulation and some issues to design a wearable airbag system. Also, a prototype was tested to show its feasibility using a human dummy mounted on a running cart.

• 한국통신학회논문지
• /
• 제10권5호
• /
• pp.209-217
• /
• 1985

본 논문은 리드-뮬러 코드의 인코더 및 디코더의 설계에 관하여 체계화 시켰으며, 이러한 코드는 [J/2]개 이하의 에러를 정정할 수 있다. 리드-뮬러 코드의 해석을 이용하여, (15, 11) 리드-뮬러 코드에 대하여 순환 성질을 이용하여 인코더를 설계하고, 다수 논리 결정자 방법에 의해 디코더를 설계하였다. 또, 이러한 코드에 대해 Weight 분포 및 Performance를 구하였다. 마이크로 컴퓨터의 CPU와 Memory를 이용하기 위해 8255를 이용한 인터페이스 회로와 인코더 및 디코더를 설계, 제작하여 직접 인터페이스 시켜 실험을 하였다. 실험한 결과 한개의 에러를 완벽히 정정하였고, 한개의 정보를 수행하는데 소요되는 시간은 약 70u sec임을 알 수 있었다. 특히 (15, 11), (15, 5) 리드-뮬러 코드는 채널 에러가 $10^{-6}$~$10^{-4}$ 인 곳에 적합함을 보였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1480-1484
• /
• 2003

This paper presents the design and development of network for housing estate security system. The system can cover up to 961 houses which can be up to 1,200 meters long transfer rate of 9,600 bps. This system uses checking and warning the abnormal situation. More over this system has ability to control switch on/off the electrical equipment in the house via AC line control system. The system consists of 4 parts. The first part is a security system of each house using MCS-51 microcontroller as a central processing unit scan 32 sensors and control 8 appliances and send alarm. The MCS-51 microcontroller received control signal via telephone used DTMF circuit. The second part is distributed two levels master/slave network implementing after RS-485 serial communication standard. The protocol its base on the OSI (Open Systems Interconnection) 7 layers protocol model design focus on speed, reliability and security of data that is transferred. The network security using encrypt by DES algorithm, message sequence, time stamp checking and authentication system when user to access and when connect new device to this system. Flow control in system is Poll/Select and Stop-and-Wait method. The third part is central server that using microcomputer which its main function are storing event data into database and can check history event. The final part is internet system which users can access their own homes via the Internet. This web service is based on a combination of SOAP, HTTP and TCP/IP protocols. Messages are exchanged using XML format [6]. In order to save the number of IP address, the system uses 1 IP address for the whole village in which all homes and appliance in this village are addressed using internal identification numbers. This proposed system gives the data transfer accuracy over 99.8% and maximum polling time is 1,120 ms.

• 한국조명전기설비학회지:조명전기설비
• /
• 제7권2호
• /
• pp.41-50
• /
• 1993

본 논문에서는 마이크로 컴퓨터를 이용하여 3상 및 2상 브러시리스 직류전동기의 파라미터를 동정하는 시스템을 개발하였다. 3상 및 2상 브러시리스 직류전동기의 역기전력파형으로부터 역기전력 관계수식을 구하였다. 그리고 직류 서어브 전동기에서 적용된 Pasek의 조건식이 3상 및 2상 브러시리스 직류전동기에 있어서도 성립함을 입증하여 파라미터의 산출이 가능함을 밝혔다. 전기자전역곡선상의 잡음성분으로 인한 오차를 제거하기 위해 디지털 평균법을 적용하였고, 파라미터 산출절차와 알고리즘을 프로그램함으로써 파라미터의 측정을 완전 자동화하였다. 그리고 제안된 방법으로 산출된 파라미터가 참 파라미터인가를 확인하기 위해, 관계식에 대입하여 얻어진 계산된 전류곡선과 디지털 평균된 전류곡선을 비교한 결과, 잘 일치하였다.

• Journal of Biosystems Engineering
• /
• 제16권2호
• /
• pp.124-132
• /
• 1991

This study was carried out to obtain the information needed in the development of forward speed control system and the improvement of combine performance. The effects of variety, grain moisture content and forward speed on the combine load characteristics were investigated through experiments. The results of this study are summarized as follows. 1. A data acquisition system was developed to measure the engine speed and the torques and speeds of the threshing cylinder, dean-grain auger and tailings-return auger. The system consisted of transducers, signal conditioner, interface board and microcomputer. The system accuracy is better than ${\pm}2.3%$ full scale. 2. Linear regression equations were obtained for the torque, speed and power requirement of threshing cylinder for different paddy varieties, grain moisture contents and feed rates. 3. The maximum value of relative frequency for threshing cylinder torque decreased as the increase in feed rate and moisture content. The range of torque fluctuation was 1.2~3.7 and 1.2~1.9 times the average and maximum torque, respectively. The maximum value of power spectrum density (PSD) appeared to be about 11 Hz regardless of paddy variety, grain moisture content and feed rate. 4. The speed of tailings return thrower decreased rapidly at below 900rpm, and it fell to near zero about 3 seconds after that time. When the travelling of combine harvester was stopped immediately after sensing the overload, it took about 7 seconds for a full recovery of the no-load speed of tailings return thrower.