• 분석과학
• /
• 제18권4호
• /
• pp.355-361
• /
• 2005

본 연구는 인산의 전처리에 의한 두 종류의 활성탄소섬유의 특성 변화와 여기에 칼륨을 처리하여 표면 특성을 비교하고자 하였다. X-선 회절 패턴은 인산을 전처리함에 따라 칼륨종을 포함하는 활성탄소섬유에 대한 금속과 금속염의 존재에 대한 좋은 결과를 나타내었다. 인산을 처리한 후에 표면특성과 비표면적 변화에 차이의 원인을 나타내기 위하여, 동공구조와 표면 모폴로지를 흡착분석과 SEM에 의하여 연구하였다. 인산을 가지고 전처리한 활성탄소섬유의 칼륨 처리효과에 대한 화학적 구성에 대한 원소분석을 위하여 EDX를 사용하였다. 최종적으로, 산소를 포함하는 기능기의 형태와 정성분석은 Boehm에 의하여 제안된 방법으로 부터 결정하였다.

• 분석과학
• /
• 제8권4호
• /
• pp.887-894
• /
• 1995

Toward the development of universal, sensitive, and convenient method of DNA (or RNA) detection, two kinds of electrochemically active DNA ligands. acridine - viologen and oligonucleotide - ferrocene conjugate, were prepared. Thermodynamic and electrochemical study revealed that these probes bound strongly to DNA, and showed a typical cyclic voltammograms, indicating a potential for use as a reversible electrochemical labelling agent for DNA. Especially, using the electrochemically active oligonucleotide, we have been able to demonstrate the detection of DNA at femtomole levels by HPLC equipped with ordinary electrochemical detector (ECD). These results lead to the conclusion that the redox-active probes are very useful for the microanalysis of nucleic acid due to the stabilily of the complexes, high detection sensitivity, and wide applicability to the target structures (single- and double strands) and sequences.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2005년도 춘계 학술대회
• /
• pp.432-432
• /
• 2005

사용후핵연료시료 중에 함유된 요오드(I-127 및 129)를 정량하기 위하여 화학적 방법으로 분리 회수하고 중성자방사화분석법을 이용하였다. 사전실험으로 모의사용후핵연료를 이용하여 회수율을 측정하였다. 모의 및 실제사용후핵연료시료를 $90^{\circ}C$에서 8 M $HNO_3$ 용액으로 용해하고 용해 후 용해용액 중의 잔류 요오드, 응축 및 휘발된 요오드 각각을 정량하였다. 응축 요오드는 핵연료 용해 후 재증류하여 회수하였다. 잔류 및 응축 요오드는 시료의 산화상태를 조절한 후 용매추출로 요오드를 회수한 다음 이온교환 또는 침전법으로 방사화학적으로 분리한 후 중성자방사화분석(RNAA)으로 정량하였다. 제작한 이온교환분리관 및 여과키트에 요오드를 흡착 또는 침전시켜 분리한 다음 중성자조사를 위한 삽입체(Insert)로 이용하였다. 휘발 요오드는 제조한 흡착체(Ag-silica gel)를 담은 흡착관에 포집하고 홉착체를 구간별 균질시료로 만든 다음 비파괴중성자 방사화분석(INAA)으로 정량하였다. 침전 및 흡착 요오드의 화학적 특성을 EPMA(electron probe microanalysis) 분석으로 조사하였다. 요오드 정량결과를 다른 방법으로 비교분석하기 위하여 음이온교환수지상에서 요오드를 정제 및 회수하기 위한 용리거동을 조사하였다.

• 열처리공학회지
• /
• 제12권3호
• /
• pp.199-205
• /
• 1999

The quaternary Ti-Al-V-N films have been grown on glass substrates by reactive dc and rf magnetron sputter deposition from a Ti-6Al-4V target in mixed Ar-$N_2$ discharges. The Ti-Al-V-N films were investigated by means of X-ray diffraction(XRD), electron probe microanalysis(EPMA) and scratch tester. Both XRD and EPMA results indicated that the Ti-Al-V-N films were of single B1 NaCl phase having columnar structure with the (111) preferred orientation. Scratch tester results showed that the adhesion strength of Ti-Al-V-N films which treated with substrate heating and vacuum annealing was superior to that of as-deposited film. The good adhesion strength was also achieved in the double-layer structure of Ti-Al-V-N/Ti-Al-V/Glass.

• 한국표면공학회지
• /
• 제39권5호
• /
• pp.215-222
• /
• 2006

The passivity behavior of copper anode containing impurities in copper sulfate solution for electrorefining process was studied at several different levels of impurities such as As, Sb, Bi and Pb. The passivity behavior was investigated by electrochemical techniques (galvanostatic, potentiodynamic and cyclic voltammetry tests) and surface analysis (optical microscopy, electron probe microanalysis, scanning electron microscopy). The results were that arsenic, antimony inhibited passivation and bismuth accelerated it and lead containing anode showed different passivity behavior from above anodes. The improved passivity characteristics could be explained by decrease in oxygen content in passivity film which resulted from a reaction among the impurities, oxygen and copper in the anode. The SEM image revealed that arsenic or antimony containing anode exhibited a porous passivity film and bismuth containing anode showed the compact passivity film and lead containing anode had loose passivity film on anode.

• 한국주조공학회지
• /
• 제30권5호
• /
• pp.179-186
• /
• 2010

To elucidate the effects of alloying elements on the characteristics of microstructure and high temperature oxidation of cast austenitic stainless steel, a thermodynamic calculation, a cyclic oxidation test, a X-ray diffraction, a scanning electron microscopy-back scattered electron, a electron probe microanalysis were conducted. The thermodynamic calculation for the effect of vanadium (V) addition on the formation of various precipitates leads to a decrease of chromium (Cr)-rich $M_{23}C_6$ carbides due to the formation of M (C, N) carbo-nitrides containing V and / or niobium (Nb). The V added alloy increased the resistance to high temperature oxidation due to a decrease of Cr-depleted zone deteriorating the oxidation resistance and due to the V-enriched oxide layer formed in inner oxide layer blocking the outward transport of cations.

• 전기화학회지
• /
• 제7권4호
• /
• pp.201-205
• /
• 2004

본 연구에서는 Pt-Ru 촉매를 $H_2PtCI_6$ 및 $RuCl_3$ 용액을 화학적 환원에 의해 전도성 고분자인 폴리피롤을 중합시킨 Nafion 막위에 직접 침적시켰다 EDS 분석 결과 Pt 및 Ru 촉매는 Ppy/Nafion 표면에 주로 분포하는 것을 알 수 있었다. 또한 폴리피롤이 중합된 Nanon 위에 침적시킨 Pt-Ru 촉매의 메탄올에 대한 전기화학적 산화특성을 CV로 평가하였다. 메탄을 산화 개시 전위는 Ru촉매에 사용이 증가함에 따라 음전위 방향으로 전이되었다. 따라서 폴리피롤이 중합된 Nafion표면에 Pt-Ru촉매를 직접 함침할 수 있었고. 메탄올 산화 특성을 나타내는 전극을 제작할 수 있었다.

• Carbon letters
• /
• 제7권1호
• /
• pp.34-41
• /
• 2006

The objective of this paper is to compare the variation of surface properties by hydrochloric acid pre-treatment and of metallic potassium and their salts loading effect for activated carbon after surfaces transformation by acid. From the results of nitrogen adsorption, each isotherm shows a distinct knee band, which is closely related to the characteristic of microporous carbons with capillary condensation in micropores. In order to present the causes of the differences in surface properties and $S_{BET}$ after the samples were treated with hydrochloric acid, pore structure and surface morphology are investigated by adsorption analysis. X-ray diffraction (XRD) patterns indicate that activated carbons show better performance for metallic potassium and potassium salts by pre-treatment with hydrochloric acid. Scanning electron microscopy (SEM) pictures of potassium/activated carbon particles provide information about the homogeneous distribution of metal or metal complex on the surface. For the chemical composition microanalysis for potassium treatment of the activated carbon pre-treated with hydrochloric acid, samples were analyzed by energy disperse X-ray (EDX). Finally, the type and quality of oxygen groups are determined from the method proposed by Boehm. A positive influence of the acidic groups on the carbon surface by acid treatment is also demonstrated by an increase in the contents of potassium salts with increasing of acidic groups calculated from Boehm titration.

• Bulletin of the Korean Chemical Society
• /
• 제30권7호
• /
• pp.1607-1610
• /
• 2009

The carbon-coated Si/Cu powder has been prepared by mechanical ball milling and hydrocarbon gas decomposition methods. The phase of Si/Cu powder was analyzed using X-ray diffraction (XRD), dispersive Raman spectroscopy, electron probe microanalysis (EPMA) and transmission electron microscope (TEM). The carbon-coated Si/Cu powders were used as anode active material for lithium-ion batteries. Their electrochemical properties were investigated by charge/discharge test using commercial LiCo$O_2$ cathode and lithium foil electrode, respectively. The surface phase of Si/Cu powders consisted of carbon phase like the carbon nanotubes (CNTs) with a spacing layer of 0.35 nm. The carbon-coated Si/Cu/graphite composite anode exhibited a higher capacity than commercial graphite anode. However, the cyclic efficiency and the capacity retention of the composite anode were lower compared with graphite anode as cycling proceeds. This effect may be attributed to some mass limitations in LiCo$O_2$ cathode materials during the cycling.

• 동아시아경상학회지
• /
• 제4권2호
• /
• pp.1-11
• /
• 2016

This study investigated commercial power theory of traditional market through the analysis of literature review. Consumers' store selection models are made up a theory based on normative hypothesis, theory of mutual reaction, utility function estimation model, and cognitive-behavioral model. Detailed models are as follows. Normative hypothesis based theory is divided into Reilly's retail gratification theory and Converse's revised retail g ratification theory. Interaction theory is composed of Huff's probability gratification theory, MCI model and Multi-nominal Logit Model (MNL model). There are four models in retail organization position theory such as central place theories, single store position theory, multi store position - assign model, and retail growth potential model. In case of single store position theory, theoretical and empirical techniques have developed for a decision to optimum single store position. Those are like these, a check list, the most simple and systematic method, analogy, and microanalysis technique. Aforementioned models are theoretical and mathematical commercial power measurement and/or model. The study has rather limitations because the variation factors included in formula are only a part of actual commercial power. Therefore, further study shall be made continuously to commercial power areas and variables.