• 전기학회논문지
• /
• 제59권9호
• /
• pp.1632-1637
• /
• 2010

A micro-water-nozzle, as one of a cooling means of micro-electronic devices, has been proposed and investigated. The I-V characteristics of the micro-water-nozzle and effect of applied voltage on the meniscus formation and deformation and ejection processes of de-ionized water on the micro-water-nozzle tip have been investigated. The water ejection processes, such as a drop formation, a drop deformation, a dripping, a cone jet, and an atomization, were taken place on the micro-water-nozzle tip by the electrohydrodynamic forces acted by the DC and AC high voltages applied on the meniscus of the micro-water-nozzle tip. The I-V characteristics of the micro-water-nozzle-to-plate electrode system were different from that of the same metal-point electrode system, due to the meniscus formation and water droplet ejection at the nozzle tip. The positive and negative DC and AC high voltages showed the water droplets ejection, the ejection rates of 1.8, 1.5 and 1.2 g/h respectively, which, however, showed that the proposed micro-water-nozzle-to-plate electrode system could be used as one of an effective pumping means.

• 한국기계가공학회지
• /
• 제14권1호
• /
• pp.98-104
• /
• 2015

This experiment was a study of a Vortex nozzle designed to produce micro-bubbles due To investigate air self-suction and the generation of micro-bubble by the Vortex nozzle, the dimensions of air intake region, the nozzle shape, and the nozzle exit diameter ($d_n=5,7,9.2,12.3mm$)werevaried. The air self-suction rate was ~1,000 to 2,000 cc/min at the orifice nozzle (7 mm), and ~100 and ~22 cc/min at the sector nozzles (9.2 and 12.3 mm, respectively). The most bubbles were detected in the orifice nozzle, but bubbles less than $50{\mu}m$ were found in the 12.3-mm sector nozzle. The dissolved oxygen in the tank water was much greater in Case 2 than in Case 1, at both the orifice and sector nozzles. Moreover, the reduction rate of dissolved oxygen was found to be less at the sector nozzles, than at the orifice nozzle.

• 마이크로전자및패키징학회지
• /
• 제10권4호
• /
• pp.53-60
• /
• 2003

CCD(Charge-Coupled Device) wafer와 같이 표면이 polymer 성분의 micro lens로 구성되어있는 경우 passivation 막을 도포하지 않는 것이 보통인데, 이때 particle이 lens 표면에 쉽게 달라붙는 현상이 나타나게 된다. 특히 sawing 하면서 발생하는 particle은 치명적인 불량을 유발한다. 본 연구에서는 sawing에서 발생한 particle을 효과적으로 flushing하기위한 방안으로 측면노즐과 중심노즐의 분사위치, 분사각도, 퍼짐각도를 최적화 하고, 아울러 flushing 노즐을 추가한 새로운 형태의 wafer saw를 도입하였다. 개선된 saw를 적용하여 실험한 결과 particle로 인한 CCD chip의 불량률이 9.l%로부터 0.63%로 현격하게 개선되었음을 확인할 수 있었다.

• 대한기계학회논문집A
• /
• 제36권12호
• /
• pp.1643-1651
• /
• 2012

현재 생활문화 수준의 향상과 소득 증대에 따라 환경오염에 대한 관심이 증가하고 있다. 또한, 수질오염에 대한 규제가 강화되어 수질오염 방지 및 하수처리 효율 향상을 위한 연구가 지속적으로 수행되고 있다. 하수처리 효율을 향상시키는 방법 중 하나는 수처리조 내에서 용존산소량을 늘려주는 것이다. 본 연구에서는 용존산소량을 늘려주고, 산소 발생기에서 발생되는 버블의 크기를 작게 만들 수 있는 설계 방안을 제시한다. 마이크로버블 발생노즐로 유입되는 물과 공기의 유동 형태에 따라 선회 및 충돌을 생성시켜 버블의 크기를 미세하게 만들었다. 본 해석결과에서 충돌 방식의 경우 버블의 크기는 목표치를 만족하지 못하였다. 반면 선회를 이용한 노즐에서는 $0{\sim}50{\mu}m$ 사이의 버블이 79.3%를 차지하고 있는 것으로 나타났다. 본 연구를 통해 개발된 마이크로버블 발생노즐은 하수처리 효율을 증대시킬 수 있을 것이다.

• 드라이브 ㆍ 컨트롤
• /
• 제16권1호
• /
• pp.1-6
• /
• 2019

The use of micro bubbles in industrial fields has been increasing in the recent years., particularly micro-bubble sterilization and water purification effects. Various methods have been developed for the generation of micro-bubbles. Depending on the method of generating bubbles, the micro-bubbles can be roughly classified into saturation molding, cavitation and rotation flow types. The objective of this study was to use ventilated tube type as a method of generating micro-bubbles in order to purify large amount of water quality such as lakes and reservoirs. This method shows a difference in efficiency in which micro-bubbles are generated depending on the contact ratio of gas to liquid. The study also investigated the optimal gas liquid contact ratio by applying various orifice methods and investigated the optimum condition of micro-bubble generation by gas Based on this, a technology to develop a micro-bubble generator with a venturi type nozzle shape that has a high water purification effect was developed.

• 한국기계가공학회지
• /
• 제15권1호
• /
• pp.8-13
• /
• 2016

The micro drill bit automatic regrinding in-line system is a system that refurbishes drill bits used in a PCB manufacturing process. This system is able to refurbish drill bits with a minimum size of ø0.15-0.075mm that have previously been discarded. Beyond the conventional manual cleaning process using ultrasound, this system adopts a water jet cleaning system, making it capable of cleaning drill bits with a minimum size of ø0.15-0.075mm. This paper analyses various contact pressures applied to the surface of drill bits depending on the shooting pressure of the cleaning device and fluid velocity in order to optimize the nozzle location and to detect structural instability caused by the contact pressures.

• 한국유체기계학회 논문집
• /
• 제18권3호
• /
• pp.60-65
• /
• 2015

This paper deals with performance characteristics and efficiencies of Pelton turbine can be applied as one of ERDs (Energy Recovery Devices) of PRO (Pressure Retarded Osmosis) system for desalination. The objective of this study is experimentally estimating the performance of micro-scale Pelton turbine for PRO pilot plant. Especially the performance characteristics with variations of jet nozzle diameter of Pelton turbine are discussed in detail. In order to do this, lab scale test rig of Pelton turbine was made for performance test, which includes water tank, Pelton wheel with buckets, jet nozzle and torque brake and so on. The parameter effects related on Pelton turbine's efficiency were investigated and discussed on the influence of the variations of load and speed ratio.

• 대한기계학회논문집
• /
• 제16권5호
• /
• pp.933-942
• /
• 1992

본 연구에서는 이상류 동축 노즐의 미립화 기구를 규명하기 위한 기초단계로 20˚의 증류수를 사용하여 이상류 동축노즐의 평균액적 직경에 미치는 공급유량의 영 향을 직접사진 촬영법을 사용하여 규명하고자 한다.

• 한국유체기계학회 논문집
• /
• 제17권5호
• /
• pp.19-26
• /
• 2014

The cross flow turbine attracts more and more attention for its relatively wide operating range and simple structure. In this study, a novel type of micro cross flow turbine is developed for application to a step in an irrigational channel. The head of the turbine is only H=4.3m and the turbine inlet channel is open ducted type, which has barely been studied. The efficiency of the turbine with inlet open duct channel is relatively low. Therefore, a guide nozzle on the turbine inlet is attached to improve the performance of the turbine. The guide nozzle shapes are investigated to find the best shape for the turbine. The guide nozzle plays an important role on directing flow at the runner entry, and it also decreases the negative torque loss by reducing the pressure difference in Region 1. There is 12.5% of efficiency improvement by attaching a well shaped guide nozzle on the turbine inlet.

• 한국추진공학회지
• /
• 제26권2호
• /
• pp.28-39
• /
• 2022

배기플룸 주위에 물을 분사할 경우 배기플룸에서 방출되는 장파장 적외선에 대한 특성을 알기 위하여 실험적인 방법으로 연구를 수행하였다. 배기플룸을 생성하기 위하여 마이크로 제트엔진을 사용하였으며, 배기노즐 주위에 8개의 물 분사노즐을 배치하였다. 물을 배기플룸과 평행하게 분사하여 배기플룸을 감싸거나, 또는 배기플룸 내에 물을 분사하는 두 가지 분사각도를 적용하였다. 장파장 적외선 신호 측정결과 물을 배기플룸과 평행하게 분사할 경우 물 분사유량에 따라 적외선 신호는 감소되었다. 배기플룸 내에 물을 분사할 경우, 적외선 신호는 배기플룸만 분사하는 경우보다 오히려 큰 값을 나타내는 것으로 측정되었다.