• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.960-968
• /
• 2003

The objective of this study is to investigate the effect of AE activities in the crack opening and closure during the fatigue test. The laboratory experiments for various materials and test conditions were carrie out to identify AE characteristics of fatigue crack propagation. Compact tension specimens of SWS 490B and Al 7075-T6 alloy were prepared for fatigue test. AE activities were analyzed based on the phase of the loading cycle. In case of SWS 490B, the most of AE was generated when the crack began opening and the crack closed fully, whereas a few in the full opening of the crack. On the other hand, in case of Al 7075-T6, a distinct AE activity was observed during crack opening process. AE activity in the peak loading of cycle was different with each specimen. However, in the same material, AE activity was not affected by the change of cyclic frequency (0.1, 0.2, 1.0 ㎐). It was found that AE activities during crack opening and closure depend on material properties such as micro-structure, yield strength and elongation.

• 한국공작기계학회논문집
• /
• 제10권1호
• /
• pp.133-140
• /
• 2001

Recently, to assure the integrity of a structural components such as piping pressure vessels and thinning structure, Lamb wave inspection technique has been used in material evaluation. It is very important to select the optimal Lamb wave mode and to analyze the signal accurately because of its unique dispersion properties grnerating several modes within the speci-men. It this study, the feasibility of material evaluation applications using wavelet analysis of Lamb wave has been veir-fied experimentally. These results show as follows; 1)dispersion characteristic of each mode in dispersion curve is demon-strated that A0 mode propagating material surface is useful mode having the lest energy loss and not sensitive to surface condition. 2) it can be detected even the micro defect ($1\times2mm$) fabricated in ultrasonic probe flaw distance (290mm) to axis direction. 3) the wavelet transform which is called "time-frequency analysis" shows the Lamb wave propagation due to the change of materials characterization can be evaluated at each frequency and experimental group velocity of Lamb wave agrees quite well with that of simulated dispersion curve.ion curve.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
• /
• pp.190-193
• /
• 2005

The air filter in engine intake system filters the dirt in the breathing air but also it attenuates the noise although the phenomenon has been regarded negligible. For the analysis of the acoustical performance of air filter, an acoustical model is suggested in this paper. The air filter consists of a porous filter element, which catches the particulate dirt, and a plastic filter box, which supports the filter element. Fibrous structure of the filter element is modeled as a micro-perforated panel using the flow resistivity and porosity. The pleated geometry of the filter element is modeled as two coupled ducts and a mathematical model is developed for the analysis of sound propagation. The filter box Is modeled as a rigid rectangular box. By combining two models, a 4-pole transfer matrix for the air filter is derived. The transmission loss calculated using the transfer matrix of the suggested model is compared with the measured data. Reasonably good agreement is observed. The result can be improved by considering the visco-thermal effect in modeling, in particular at a frequency range near the troughs of TL curve.

• 비파괴검사학회지
• /
• 제13권4호
• /
• pp.32-41
• /
• 1994

탄성파에 의한 미소 동적 변위를 측정하기 위하여 안정화 회로가 부착된 Michelson 간섭계를 개발하였다. 안정화 회로는 외부 진동신호에 따른 광로차의 교란을 보상하기 위하여 압전구동기가 부착된 기준거울을 사용하였다. 안정화 회로를 사용함으로써, 간섭계는 외부 진동신호의 영향을 줄일 수 있었고, 항상 직각조건(quadrature condition)을 만족하여 광검출기의 출력신호가 최대의 감도와 선형성을 유지할 수 있었다. 검출가능한 최소 변위는 10MHz 대역에서 0.3nm 이었다. 개발된 간섭계를 사용하여 유리관 파괴 및 강철구 충격에 의한 진앙점에서의 변위를 검출하여 이론적으로 계산된 값과 비교하였다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2004년도 춘계 학술발표대회 개요집
• /
• pp.324-326
• /
• 2004

l2wt%Cr Steel has been applied on turbine bucket and nozzle partition material of power plant. Turbine bucket and nozzle get damaged by solid particle within steam, therefore they are protected by surface treatments such as ion nitriding, boriding and chrome carbide HVOF spray coating. In this study, solid particle erosion(SPE) characteristics after these surface treatments are examined at operating temperature 540$^{\circ}C$ and 590$^{\circ}C$ of fossil power plant and the mechanism of damage was studied. Erosion of 12wt%Cr steel is originated by micro cutting and that of boriding and chrome carbide HVOF spray is originated by these mechanism - repeating collision, crack initiation and propagation. As the results of SPE test at 540$^{\circ}C$ and 30$^{\circ}$ impact angle that is the most commonly occurred in power plant, Boriding had the best SPE -resistance property, Cr$_2$C$_3$-25(Ni20Cr) HVOF spayed and ion nitrided samples were also better than bare metals(l2wt%Cr Steels). At 590$^{\circ}C$ and 30$^{\circ}$ impact angle, Boriding had also the most superior characteristic and HVOF spay sample was better than bare metal.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.211-216
• /
• 2001

The components with the circular cross section have the symmetric combination parts for rotating balance and the crack emanates from the symmetric combination parts. The symmetric cracks from symmetric combination parts make a decrease in the component fatigue life more than single crack. In this study, to estimate the behavior of symmetric cracks, the fatigue test was performed using rotary bending tester on the specimen with a symmetric defects in circular cross section. The material used in this study is Ni-Cr-Mo steel alloy. Under the same stress, the result from the rotary bending fatigue test turned out that the symmetric cracks made a decrease in the fatigue life by 35% more than single crack and the relation between log a and cycle ratio $N/N_f$ obtained linearly.

• 한국약용작물학회지
• /
• 제21권2호
• /
• pp.142-147
• /
• 2013

Gastrodia elata has been cultivated as an important medicinal resources to treat various human diseases. One of the major problems associated with its field production is the degeneration of seed tubers, which is mainly caused by soil-borne pathogens. This study was conducted to produce disease-free seed tubers by the development of in vitro micropropagation method. First, tubers of G. elata were treated with $HgCl_2$ prior to culturing in vitro. Among various culture medium tested, water agar (WA) and WPM medium were the most effective on the induction and growth of vegetative stems. NAA ($0.1mg/{\ell}$) or TDZ ($1.0mg/{\ell}$) in WA medium showed better growth of vegetative stems compared to other plant hormones. Finally the induction and growth of vegetative stems were better in the dark compared to the light condition. In this study, we established an in vitro micropropagation system of G. elata, which might be an efficient way to increase the yield and quality of G. elata tubers in the field production.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1991년도 추계학술대회
• /
• pp.142-144
• /
• 1991

In this study, we have developed 64 channel computerized cardiac mapping system using micro-computer for basic research of electrophysiology and electrical propagation in cardiac arrhythmias. The significant problems of this study are the simultaneous acquisition of large amount data at 64 sites, the need of accurate and rapid analysis, and the effective display of the analyzed data. To solve these problems, we made 64 channel signal pre-processing board in order to amplify and filter the raw signals. And the software for cardiac isochronous mapping which were presented immediately via computer-generated graphics has been developed. This system is expected to enable us to study pathophysiology of cardiac arrhythmia and to improve the results of diagnosis and surgical treatment for cardiac arrhythmia.

• The Plant Pathology Journal
• /
• 제18권5호
• /
• pp.237-243
• /
• 2002

A survey of virus infection in garlic plants cultivated in Korea was conducted for three years. Most virus-infected garlic plants (Allium sativum) showed typical symptoms on the leaves such as yellow mosaic, stripes, and distortion. Through immunosorbent electron micro-scopy and RT-PCR analysis, the complex mixtures of viruses including garlic viruses of the genus Allerivirus, gaylic strain of Leek yellow stripe virus of the genus Potyvirus, and Garlic latent virus of the genus Carlavirus were identified in the virus-infected garlic plants. Among these viruses, Allexivirus was the most frequently detect-ed in the regions surveyed. Using sets of differential primers for Allexivirus genomes, two members of the genus were amplified and sequenced from the purified viruses. The deduced amino acid sequences for the coat proteins and the nucleic acid binding proteins of two viruses showed high homologies to Garlic virus A (CarV-A) and Garlic virus D (GarV-D) of Allekivirus. This is the first report of GarV-A and GarV-D in Korea. This suggests that Allexivirus in gavlic plants in Korea was mixed and varied. Phylogenetic analyses showed that the genus Allexivirus was diversi(ied by the processes of accumulation and evolution of viruses in garlic plants due to the long period of repeated vegetative propagation.

• 한국구조물진단유지관리공학회 논문집
• /
• 제3권4호
• /
• pp.215-220
• /
• 1999

Concrete micro-cracks that are grown while the structures are under construction or in service, propagate gradually or rapidly by external forces and environmental effects. As described above, almost concrete structures generally have cracks, so for the safety and durability of structures, studies to detect cracks using nondestructive tests have been treated in great deal. The purpose of this study is to evaluate characteristics of AE signals detected from notched concrete beams bending test with different loading using one of nondestructive test, Acoustic Emission (AE) method. Furthermore this study predicts the location of initial crack and measures direction of crack propagation for on-line monitoring before the crack really grows in structures by using two-dimensional AE source location based on rectangular method with three-point bending test. This will allow efficient maintenance of concrete structures through monitoring of internal cracking based on acoustic emission method.