• 제목/요약/키워드: Micro-mobility

검색결과 161건 처리시간 0.025초

반응성 액상 소결법으로 제조한 다공성 Mg3Sb2계 화합물의 열전물성 (Thermoelectric Properties of Porous Mg3Sb2 Based Compounds Fabricated by Reactive Liquid Phase Sintering)

  • 장경욱;김인기;김일호
    • 한국재료학회지
    • /
    • 제25권2호
    • /
    • pp.68-74
    • /
    • 2015
  • The porous $Mg_3Sb_2$ based compounds with 60~70% of relative density were prepared by powder compaction at room temperature and reactive liquid phase sintering at 1023 K for 4hrs. The stoichiometric $Mg_3Sb_2$ compounds were synthesized from elemental Sb and Mg powder in the mixing range of 61~63 at% Mg. The increased scattering effect due to the micro-pores reduced the mobility of the charge carrier and the phonon, which caused the electrical conductivity and the thermal conductivity to decrease, respectively. But the scattering effect was greater for the electrical conductivity than for the thermal conductivity. Excess Mg alloyed in the $Mg_3Sb_2$ compounds decreased the electrical conductivity, but had no effect on the thermal conductivity. On the other hand, the large increase of the Seebeck coefficient was the result of a decrease in the charge carrier density due to the excess Mg. Dimensionless figure of merit of the porous $Mg_3Sb_2$ compound reached a maximum value of 0.28 at 61 at% Mg. The obtained value was similar to that of $Mg_3Sb_2$ compounds having little pores.

EPD(Electrophoretic Deposition)를 이용한 Ni-$Al_2O_3$ 경사기능재료(FGM) 코팅에 관한 연구

  • 김형섭;양승규;이선영
    • 한국재료학회:학술대회논문집
    • /
    • 한국재료학회 2012년도 춘계학술발표대회
    • /
    • pp.104.2-104.2
    • /
    • 2012
  • 이종 재료의 접합에 대한 연구는 단일 재료에서 얻을 수 없는 물리적/기계적 특성과 이종 재료의 우수한 특성을 얻을 수 있다는 장점이 있어 국내외 적으로 연구가 활발히 진행되고 있다. 이러한 이종 접합 기술은 구조재료와 에너지 변환분야에 가장 많이 사용되고 있으며, 그 외 광촉매와 Thin film, 경량구조재료 등에도 사용되고 있다. 그 중 FGM(Functional Graded Materials)는 조성의 점진적인 변화를 통하여 접합하는 방법으로 이종 재료 접합 시 발생하는 내부 응력을 해소해줌으로써 적합한 방법이라고 할 수 있다. FGM 제작에 사용되는 방법으로 널리 알려진 것들로는 plasma spraying, 원심주조, 분말 야금법, PVD, CVD 그리고 EPD(electrophoretic deposition) 등이 있다. 이중에서 EPD는 수용액이나 유기용매와 같은 분산매체 중에 콜로이드 입자의 표면에 대전되는 전하를 이용하여, 외부에서 전장을 걸어서 입자의 움직임을 제어하는 기술이다 EPD는 코팅 속도가 상대적으로 빠르고 두꺼운 코팅 층 제작이 가능하다. 또한 바인더, 윤활제 또는 가소제를 사용하지 않고 다양한 종류와 모양의 기판 위에 균일한 코팅이 가능하다는 장점이 있다. 본 연구에서는 Ni substrate를 이용하여 그 위에 Ni과 $Al_2O_3$의 조성을 점진적으로 변화시켜 FGM을 EPD 방법으로 코팅하였다. 여기서 사용된 Ni은 높은 녹는점과 좋은 연성으로 인해 성형이 용이하여 구조재료로 적합하며, $Al_2O_3$는 고내열성과 내부식성을 가지며 경도가 높다는 장점이 있다. 본 연구에서는 EPD 방식을 이용하여 Ni/$Al_2O_3$ FGM을 코팅하였으며, 코팅 후 발생하는 substrate와의 접착력 문제를 해결하기 위해서 건조 방식과 substrate의 표면 상태를 최적화하여 다층의 Ni/$Al_2O_3$ FGM을 코팅 및 소결하였다. Zeta-potential 측정을 통해 electrophoretic mobility와 suspension의 분산 안정도를 평가 할 수 있었으며, X-ray 회절 분석(XRD)을 통하여 Ni 의 환원 여부를 확인하였다. 또한 Scanning electron microscopy(SEM) 분석을 통하여 미세구조 분석을 하였고, 최종적으로 Electron Probe Micro Analyzer (EPMA) 를 이용하여 다층 구조의 조성변화를 확인함으로 Ni/$Al_2O_3$의 FGM 코팅이 이루어졌음을 확인하였다.

  • PDF

HMIPv6환경에서 새로운 동적 페이징 기법 (A New Dynamic Paging Mechanism for HMIPv6 Networks)

  • 정유진;최종원
    • 한국정보과학회논문지:정보통신
    • /
    • 제32권6호
    • /
    • pp.687-695
    • /
    • 2005
  • 최근 무선 접속망의 급속한 발전으로 이동 통신 환경에서 인터넷 서비스 제공에 대한 요구가 늘어남에 따라, IP기반의 이동성 지원과 마이크로 이동성에 따른 위치관리 트래픽을 줄일 수 있도록 해주는 HMIPv6 프로토콜이 제안되었다. HMIPv6에 페이징을 적용함으로써 MN의 위치등록에 필요한 시그널링 및 위치정보 데이타베이스의 갱신을 위한 처리를 줄일 수 있다. 본 논문에서는 각기 다른 특성을 갖는 이동 노드들에 하나의 동일한 페이징 영역이 정적으로 적용되는 것이 아닌, 각 이동 노드의 특성를 고려하여 각각의 이동 노드에 적합한 최적의 페이징 영역이 설정되는 HMIPv6 환경에서의 새로운 동적 페이징 기법(DP-HMIPv6)을 제안한다. 수학적 성능 분석을 통해 정적 페이징 기법보다 제안 기법인 동적 페이징 기법을 이용하였을 때 비용이 절감되었음을 확인 할 수 있었다. 또한 네트워크 상에 이동 노드의 수가 많아질수록 동적 페이징 기법을 통한 비용 절감은 더욱더 효과적임을 알 수 있다.

모듈레이티드 펄스 스퍼터링으로 상온 증착한 Indium-Tin-Oxide (ITO) 나노 박막 (Indium Tin Oxide (ITO) Nano Thin Films Deposited by a Modulated Pulse Sputtering at Room Temperature)

  • 유영군;정진용;주정훈
    • 한국표면공학회지
    • /
    • 제47권3호
    • /
    • pp.109-115
    • /
    • 2014
  • High power impulse magnetron sputtering (HIPIMS), also known as the technology is called peak power density in a short period, you can get high, so high ionization sputtering rate can make. Higher ionization of sputtered species to a variety of coating materials conventional in the field of improving the characteristics and self-assisted ion thin film deposition process, which contributes to a superior being. HIPIMS at the same power, but the deposition speed is slow in comparison with DC disadvantages. Since recently as a replacement for HIPIMS modulated pulse power (MPP) has been developed. This ionization rate of the sputtered species can increase the deposition rate is lowered and at the same time to overcome the problems to be reported. The differences between the MPP and the HIPIMS is a simple single pulse with a HIPIMS whereas, MPP is 3 ms in pulse length is adjustable, with the full set of multi-pulses within the pulse period and the pulse is applied can be micro advantages. In this experiment, $In_2O_3$ : $SnO_2$ composition ratio of 9 : 1 wt% target was used, Ar : $O_2$ flow rate ratio is 4.8 to 13.0% of the rate of deposition was carried out at room temperature. Ar 40 sccm and the flow rate of $O_2$ and then fixed 2 ~ 6 sccm was compared against that. The thickness of the thin film deposition is fixed at 60 nm, when the partial pressure of oxygen at 9.1%, the specific resistance value of $4.565{\times}10^{-4}{\Omega}cm$, transmittance 86.6%, mobility $32.29cm^2/Vs$ to obtain the value.

고에너지 볼 밀링이 Skutterudite계 CoSb3의 열전 및 전하 전송 특성에 미치는 영향 (Effect of High-Energy Ball Milling on Thermoelectric Transport Properties in CoSb3 Skutterudite)

  • 남우현;맹은지;임영수;이순일;서원선;이정용
    • 한국전기전자재료학회논문지
    • /
    • 제28권12호
    • /
    • pp.852-856
    • /
    • 2015
  • In this study, we investigate the effect of high-energy ball milling on thermoelectric transport properties in double-filled $CoSb_3$ skutterudite ($In_{0.2}Yb_{0.1}Co_4Sb_{12}$). $In_{0.2}Yb_{0.1}Co_4Sb_{12}$ powders are milled using high-energy ball milling for different periods of time (0, 5, 10, and 20 min), and the milled powders are consolidated into bulk samples by spark plasma sintering. Microstructure analysis shows that the high-energy ball milled bulk samples are composed of nano- and micro-grains. Because the filling fractions are reduced in the bulk samples due to the kinetic energy of the high-energy ball milling, the carrier concentration of the bulk samples decreases with the ball milling time. Furthermore, the mobility of the bulk samples also decreases with the ball milling time due to enhanced grain boundary scattering of electrons. Reduction of electrical conductivity by ball milling has a decisive effect on thermoelectric transport in the bulk samples, power factor decreases with the ball milling time.

Mathematical Models of Competitive Adsorption of Inorganic Anions in Soils

  • Lee, Kyo Suk;Lee, Dong Sung;Lee, Jae Bong;Joo, Rhee Na;Lee, Myong Yun;Chung, Doug Young
    • 한국토양비료학회지
    • /
    • 제48권6호
    • /
    • pp.666-670
    • /
    • 2015
  • Competition among anion species in solution for same sorption sites and soil surface can be of major significance in determining the effective mobility of any potentially adsorbing species. Major soil anion species include $OH^-$, $F^-$, $Cl^-$, $HCO_3{^-}$, $CO_3{^-}$, $NO_3{^-}$, $SO_4{^{2-}}$, and $PO_4{^{3-}}$. And some micro nutrients such as boron and molybdenum exist as $H_2BO_3{^-}$ and $MoO_4{^{2-}}$, as do some heavy metals such as chrome and arsenic as $CrO_4{^{2-}}$ and $HAsO_4{^{2-}}$. Pesticides such as 2,4,5-T and 2,4-D also exist as anions. Many anion species are retained by more complex mechanisms than the simple electrostatic attractions involved in most cation adsorption reactions. In binary system composed of two anions, the adsorption of one anion is influenced by the other anion due to the competition for the available and limited binding sites in soil constituents. The specifically adsorbed anions may compete more effectively for sorption sites than that of nonspecifically adsorbed anion. In this study, we aim to evaluate the mathematical models to determine the magnitude of concentration variations in adsorption due to competitive interactions between anions introduced to a system in binary mixtures.

Expression of the Floral Repressor miRNA156 is Positively Regulated by the AGAMOUS-like Proteins AGL15 and AGL18

  • Serivichyaswat, Phanu;Ryu, Hak-Seung;Kim, Wanhui;Kim, Soonkap;Chung, Kyung Sook;Kim, Jae Joon;Ahn, Ji Hoon
    • Molecules and Cells
    • /
    • 제38권3호
    • /
    • pp.259-266
    • /
    • 2015
  • The regulation of flowering time has crucial implications for plant fitness. MicroRNA156 (miR156) represses the floral transition in Arabidopsis thaliana, but the mechanisms regulating its transcription remain unclear. Here, we show that two AGAMOUS-like proteins, AGL15 and AGL18, act as positive regulators of the expression of MIR156. Small RNA northern blot analysis revealed a significant decrease in the levels of mature miR156 in agl15 agl18 double mutants, but not in the single mutants, suggesting that AGL15 and AGL18 co-regulate miR156 expression. Histochemical analysis further indicated that the double mutants showed a reduction in MIR156 promoter strength. The double mutants also showed reduced abundance of pri-miR156a and pri-miR156c, two of the primary transcripts from MIR156 genes. Electrophoretic mobility shift assays demonstrated that AGL15 directly associated with the CArG motifs in the MIR156a/c promoters. AGL18 did not show binding affinity to the CArG motifs, but pull-down and yeast two-hybrid assays showed that AGL18 forms a heterodimer with AGL15. GFP reporter assays and bimolecular fluorescence complementation (BiFC) showed that AGL15 and AGL18 co-localize in the nucleus and confirmed their in vivo interaction. Overexpression of miR156 did not affect the levels of AGL15 and AGL18 transcripts. Taking these data together, we present a model for the transcriptional regulation of MIR156. In this model, AGL15 and AGL18 may form a complex along with other proteins, and bind to the CArG motifs of the promoters of MIR156 to activate the MIR156 expression.

Synthesis of High-Quality Monolayer Graphene on Copper foil by Chemical Vapor Deposition

  • 이수일;김유석;송우석;조주미;김성환;박종윤
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제41회 하계 정기 학술대회 초록집
    • /
    • pp.351-352
    • /
    • 2011
  • 그래핀(Graphene)은 2차원 평면구조의 $sp^2$ 탄소 결합으로 이루어진 물질이다. 일반적으로 그래핀은 탄소 원자 한층 정도의 얇은 두께를 가지면서 강철의 100배 이상 높은 강도, 다이아몬드보다 2배 이상 뛰어난 열 전도성, 그리고 규소보다 100배 이상 빠른 전자이동도 등의 매우 우수한 특성을 지닌다. 그래핀을 합성하거나 얻는 방법에는, 기계적 박리법(Micro mechanical exfoliation), 산화흑연(graphite oxide)을 이용한 reduced graphene oxide(RGO)방법과 탄화 규소(SiC)를 이용한 epitaxial growth 방법 등이 있지만, 대 면적화가 어렵거나 구조적 결함이 큰 문제점이 있다. 반면, 탄화수소(hydrocarbon)를 탄소 공급원으로 하는 열화학 기상 증착법(Thermal chemical vapor deposition, TCVD)은 구조적 결함이 상대적으로 적으면서 대 면적화가 가능하다는 이점 때문에 최근 가장 많이 이용되고 있는 방법이다. TCVD를 이용, 니켈, 몰리브덴, 금, 코발트 등의 금속에서 그래핀 합성연구가 보고되었지만, 대부분 수 층(fewlayer)의 그래핀이 합성되었다. 하지만, 구리 촉매를 이용하는 것이 단층 그래핀 합성에 매우 효율적이라는 연구결과가 보고되었다. 구리의 경우, 낮은 탄소융해도(solubility of carbon) 때문에 표면에서 self limiting 과정을 통하여 단층 그래핀이 합성된다. 그러나 단층 그래핀 일지라도 면저항(sheet resistance)이 매우 높고, 이론적 계산값에 비해 전자이동도(electron mobility)가 낮게 측정된다. 이러한 원인은 구조적 결함에서 기인된 것으로써 산업으로의 응용을 어렵게 만들기 때문에 양질의 단층 그래핀 합성연구는 필수적이다[1,2]. 본 연구에서는 TCVD를 이용하여 구리 포일(25 ${\mu}m$, Alfa Aeser) 위에 메탄가스를 탄소공급원으로 하여 수소를 함께 주입하고, 메탄가스의 양과 합성시간, 열처리 시간을 조절하면서 균일한 단층 그래핀을 합성하였다. 합성된 그래핀을 $SiO_2$ (300 nm)기판위에 전사(transfer)후 라만 분광법(raman spectroscopy)과 광학 현미경(optical microscope)을 통하여 분석하였다. 그 결과, 열처리 시간이 증가할수록 촉매로 사용된 구리 포일의 grain size가 커짐을 확인하였으며, 구리 포일 위에 합성된 그래핀의 grain size는, 구리 포일의 grain size에 의존하여 커짐을 확인하였다. 또한 동일한 grain 내의 그래핀은 균일한 층으로 합성되었다. 이는 기계적 박리법, RGO 방법, epitaxial growth 방법으로 얻은 그래핀과 비교하여 매우 뛰어난 결정성을 지님이 확인되었다. 본 연구를 통하여 면적이 넓으면서도 결정성이 매우 뛰어난 양질의 단층 그래핀 합성 방법을 확립하였다.

  • PDF

연변 조선족사회의 최근 변화: 사회인구학적 접근 (Recent Changes of the Ethnic Korean Population in Yanbian Autonomous Prefecture: A Socio-demographic Approach)

  • 김두섭
    • 한국인구학
    • /
    • 제26권2호
    • /
    • pp.111-145
    • /
    • 2003
  • 이 연구는 개혁개방정책 이후 중국 내 조선족이 보인 사회인구학적 행태의 변화를 설명하기 위한 것이다. 시장경제체제의 도입과 한중 국교수립 이후 조선족사회는 출산력수준의 급격한 저하와 인구구조의 고령화로 매우 급격한 변화를 겪고 있다. 조선족의 인구행태와 인구구조의 이러한 변화는 한족에 비해 두드러지게 나타난다. 중국 내 조선족인구가 가장 밀집되어 거주하고 있는 연변지역의 조선족사회는 최근 절대인구규모의 감소추세를 보이고 있다. 아울러 시장경제의 도입 이후 이동성향이 높아지고 통혼권과 거주지역이 확산되며. 조선족학교를 통한 민족교육이 급격히 위축되는 추세를 보인다. 그리고 이에 따라 조선족사회의 사회적 통합과 문화정체성이 약화되고 중국 내 소수민족사회로서의 위상도 점차 약화되는 과정에 있다. 연변 조선족사회의 사회인구학적 변화와 위기상황에 대한 설명을 위해 이 연구는 연변조선족자치주의 1990년과 2000년 인구센서스 자료와 각종 통계자료를 활용하였다. 또한, 이 연구에서는 인구센서스를 통하여 드러난 조선족인구의 연령구조가 매우 불규칙적이라는 점을 감안하여 1990년과 2000년 인구센서스 자료의 신뢰성과 정확도를 재검토하는 작업도 이루어졌다.

혈청단백질분획(血淸蛋白質分劃)에 대한 연구(硏究) (I, II) (Studies on Bovine Serum Protein Fractions (I, II))

  • 임봉호
    • 대한수의학회지
    • /
    • 제5권1호
    • /
    • pp.1-16
    • /
    • 1965
  • I. A Comparison of Sodium Sulfate Precipitation and Zone(Paper, Agar) Electrophoresis; Many kinds of techniques have been used for fractionating serum proteins. In the present study, using bovine serum, the fractions obtained with sodium sulfate were compared with those determined by zone electrophoresis. 1. Fibrinogen was precipitated with 4 to 10 percent of sodium sulfate. 2. ${\gamma}$-globulin required 10 to 16 percent of the salt for precipitation. 3. ${\beta}$-globulin began to precipitate at 12 percent sodium sulfate, and completed precipitation at approximately 26 percent in paper electrophoresis, while at 22 percent in agar electrophoresis. 4. ${\alpha}$-globulin completed precipitation at 13 to 28 percent sodium sulfate in paper electrophoresis and at 22 percent in agar electrophoresis. 5. Albumin began to precipitate at 14 percent of the salt, and was free from the mixture of globulins approximately at 28 percent in paper electrophoresis, while at 22 percent in agar electrophoresis. The results of comparing fractions by the two methods were as follows: 1. Euglobulin (15%) was equal to the sum of the most ${\gamma}$-globulin and a small quantity of the ${\alpha}$-, and ${\beta}$-globulins. 2. Pseudoglobulin I (15-17.5%) corresponded to the most ${\alpha}$-, ${\beta}$-globulins and a small quantity of albumin. 3. Pseudoglobulin II(18-22%) was a mixture of the ${\alpha}$-, ${\beta}$-globulins and albumin fraction. 4. Albumin (above 22%) contained the most albumin fraction separated by zone electrophoresis and a small quantity of the ${\alpha}$-, and ${\beta}$-globulins. As mentioned above the fractions obtained with sodium sulfate were a mixture of the various proportion of the fractions determined by zone electrophoresis. The solubility of serum fractions to sodium sulfate coincided with the mobility of those by zone electrophoresis. (By percent of sodium sulfate we mean gram of sodium sulfate contained in $100m{\ell}$ of solution). II. Immunological Studies on Serum Protein Fractions with Sodium Sulfate; In the previous report the fractions of bovine serum protein with sodium sulfate compared with those obtained by zone electrophoresis, and the findings were that the former contained various proportion components of the latter. In this study the author studied whether or not the fractions with sodium sulfate are simple component antigenically by immunoelectrophoresis and micro double diffusion test (Immuno-precipitation), using rabbit antiserum to bovine serum. In immunoelectrophoresis, normal bovine serum developed with rabbit antibovine serum showed about ten distinct precipitin arcs. The distribution of these arcs was as follows: 1 albumin, 2 ${\alpha}_1$-, 3 ${\alpha}_2$-, 2 ${\beta}_1$-, ${\beta}_2$-, and 1 ${\gamma}$-globulin (Fig. 7, 9). In micro double diffusion test, five to six precipitation bands could be seen between antigens and antibody, the order of the precipitation bands location is albumin, ${\alpha}$-, ${\beta}$-, and ${\gamma}$-globulin from the side of antiserum well (Fig.19). Frequently the ${\alpha}$-, and ${\beta}$-precipitation bands were separated into two or three precipitation bands, which indicated that these globuline are not a pure component antigenically as shown in immuno-electrophoresis. In both Immunological methods, the two ${\alpha}$-, ${\beta}$-precipitin arcs and bands appeared clear and strong, indicating that the two globulins reacted as strong antigens. The precipitate reaction of ${\gamma}$-globulin was shown at 12 to 16 percent sodium sulfate; ${\beta}$-globulin at 12 to 20 percent; ${\alpha}$-globulin at 12 to 22 percent (immuno-electrophoresis), at 12 to 26 percent (Diffusion); and albumin at above 22 percent. Antigenically euglobulin contained ${\gamma}$-, ${\beta}$-, and ${\alpha}$-globulins, Pseudoglobulin I and Pseudoglobulin II were composed of ${\alpha}$-, and ${\beta}$-globulins, and albumin was a mixture of ${\alpha}$-globulin and albumin determined by zone electrophoresis. The results indicated that the fractions of serum protein obtained by either method were constituents of various proteins antigenically except ${\gamma}$-globulin and albumin by Zone electrophoresis.

  • PDF