• Journal of the Semiconductor & Display Technology
• /
• v.14 no.3
• /
• pp.23-26
• /
• 2015

A seam carving based micro-crack detection method is proposed which aims at detecting the micro-crack regions in heterogeneously textured surface of polycrystalline solar cells. By calculating the seam which is a connected path of low energy pixels in the image, the micro-crack regions can be detected. Experimental results show that the proposed seam carving based micro-crack detection method has superior efficiency in detecting the micro-crack without background noise pixels and the algorithm's computation time is less than the conventional algorithm.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.179-182
• /
• 1997

In a training simulator for power plant, operator's action in the MCR(Main Control Room) are given to plant process and computer system model as an inputs, and the same response as in real power plant is provided in real time. Inter-process communication and synchronization are especially important among various inputs. In the plant simulator, to simulate the digital control system such as FOXBORO SPEC-200 Micro control system, modification and adaptation of control card(CCC) and its continuous display station(CDS) is necessary. This paper describes the modeling and simulation of FOXBORO SPEC-200 Micro control system applied to Younggwang nuclear power plant unit #3 & 4, and its integration process to the full-scope replica type training simulator. In a simulator, display station like CDS of FOXBORO SPEC-200 Micro control system is classified as ITI(Intelligent Type Instrument), which has a micro processor inside to process information and the corresponding alphanumeric display, and the stimulation of ITI limits the important functions in a training simulator such as backtrack, replay, freeze and IC reset. Therefore, to achieve the better performance of the simulator, modification of CDS and special firmware is developed to simulate the FOXBORO SPEC-200 Micro control system. Each control function inside control card is modeled and simulated in generic approach to accept the plant data and control parameter conveniently, and debugging algorithms are applied for massive coding developed in short period.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.1
• /
• pp.50-55
• /
• 2022

Due to the wavelength shift problem of micro LED caused by the change of current density, the active matrix driving pixel circuit that is used in OLED cannot be applied to micro LED displays. Therefore, we need a gray scale method based on modulation of duration time of light emission. In this study, we propose the PWM-controlled micro LED pixel circuit based on CMOS thin film transistors (TFTs). By adopting CMOS inverter structure, we can reduce the number of storage capacitors from the circuit and make the operating speed of the circuit faster. Most of all, our circuit is designed to make operating speed of PWM circuit faster by adopting feedback effect through double gate TFT structure. As a result, it takes about 4.7ns to turn on the LED and about 5.6ns to turn it off. This operating time is short enough to avoid the color distortion and help the precise control of the gray scale.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.69-74
• /
• 2004

System-on-glass technology made with low temperature poly-Si TFT has been rapidly advancing in recent years. We have developed a low-power, narrow edged frame, 1.9inch system-on-glass LCD which fully integrates a 16-bit RGB interface driver and all power circuits required for driving the LCD. In this paper, the latest poly-Si TFT circuit technologies used in the newly developed LCD are discussed. The development trends are also reviewed.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2006.08a
• /
• pp.21-23
• /
• 2006

A newly designed micro-plasma device using SU-8 photoresist as a barrier rib has been successfully fabricated and characterized. Operating in neon gas at pressures from 300 to 800 Torr and having hexagonal structure, $5{\times}5$ arrays of micro-plasma device have been investigated. The driving voltage is lower than 250 V.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.400-401
• /
• 2009

In this paper we report a micro projector including of RGB sources, a $3{\times}1$ Fiber Optic Color Synthesizer (FOCS), and a two dimensional micro mechanical scanning mirror. We further report a modifier micro collimator which can enhance the resolution of the screened image.

• Electronics and Telecommunications Trends
• /
• v.34 no.2
• /
• pp.10-18
• /
• 2019

Since the introduction of CRT(Cathode Ray Tube) in the 1950s, display technologies have been developed continuously. Flat panel displays such as PDP(Plasma Display Panel) and LCD(Liquid Crystal Display) were commercialized in the late 1990s, and OLED(Organic Light Emitting Diodes) and Micro-LED(Micro-Light Emitting Diodes) are now being developed and are becoming widespread. In the future, we expect to develop ultra-realistic, flexible, embedded sensor displays. Ultra-realistic display can be applied to AR/VR(Augmented Reality/Virtual Reality) devices and spatial light modulators for holography. The sensor-embedded display can be applied to robots; electronic skin; and security devices, including iris recognition sensors, fingerprint recognition sensors, and tactile sensors. AR/VR technology must be developed to meet technical requirements such as viewing angle, resolution, and refresh rate. Holography requires optical modulation technology that can significantly improve resolution, viewing angle, and modulation method to enable wide-view and high-quality hologram stereoscopic images. For electronic skin, stable mass production technology, large-area arrays, and system integration technologies should be developed.

• Journal of the Semiconductor & Display Technology
• /
• v.3 no.2
• /
• pp.27-33
• /
• 2004

This paper is concerned with development of a micro tensile testing machine for optical functional materials such as single or poly crystal silicon and nickel film. Two micro tensile testers have been developed for various types of materials and dimensions. One of the testers is actuated by a PZT and the other is actuated by a servo motor for a precise displacement control. The specifications of PZT actuated micro tensile tester developed are as follows: the volumetric size of tester is desktop sized of 710$\times$200$\times$270 $mm^3$; the minimum load capacity and the load resolution in the load cell of 1N are 3 mN and 0.1 mN respectively; the full stroke and the stoke resolution of piezoelectric actuator are 1 mm and 10nm respectively. A special automatic specimen installing equipment is applied in order to prevent unexpected deformation and misalignment of specimens during handling of specimen for testing.

• Journal of the Semiconductor & Display Technology
• /
• v.13 no.3
• /
• pp.61-67
• /
• 2014

Micro-cracks in crystalline silicon wafer often result in wafer breakage in solar wafer manufacturing, and also their existence may lead to electrical failure in post fabrication inspection. Therefore, the reliable detection of micro-cracks is of importance in the photovoltaic industry. In this paper, an experimental method to select optimal parameters in anisotropic diffusion filter is proposed. It can reliably detect micro-cracks by the distinct extension of boundary as well as noise reduction in near-infrared image patterns of micro-cracks. Its performance is verified by experiments of several type cracks machined.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2009.10a
• /
• pp.1527-1530
• /
• 2009

A LCoS micro-display using polymer dispersed liquid crystals (PDLCs) for light switching layer was fabricated. The Si backplane of SVGA ($800{\times}600$) with a pixel size of $14{\times}14mm^2$ was prepared by a $0.35{\mu}m$ 18V CMOS process. PDLCs were filled in the gap between backplane and ITO glass by conventional vacuum filling method. The prepared panels were driven by a field sequential color (FSC) scheme at the frequency of 180Hz and were successful in modulating LED lights to show projection images. The preparation and performance of PDLC-LCoS are presented.