• Journal of Biomedical Engineering Research
• /
• v.16 no.1
• /
• pp.101-106
• /
• 1995

In this paper, the patient monitor consisting of ECG/Respiration Amplification, Front end CPU, Main CPU, Main Controller, Video Amplifier, Display Controller, Waveform Generator, Bus & Power Supply, 8097 Processor was developed. This patient monitor measures the patient's states in the hospital such as elecctro-cardiography, respiration, blood pressurae and temperature. The control and processing methods based on micro-processor employ the flexibility, extensibility over other conventional system. The followings are incorporated in this system. First, ECG/RESP measures the respiration by impedence pneumography. Second, FECPU utilizes an Intel 8031 microcontroller. Third, Controller function originate from a LSI CRT controller.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.123-126
• /
• 2000

본 논문에서는 음성 신호 처리 IC를 제어하는 임베디드 시스템을 Micro-controller를 이용하여 설계하고 제어 프로그램을 구성/제작하여 기능을 분석한다. 선택한 음성처리용 IC 중에서 ISD2560은 내장된 EEPROM에, T6668은 외부에 D-RAM을 연결하여 음성 메시지를 저장하고 있다. PIC16F84는 음성데이터의 입출력과 저장과 재생, 초기화를 위한 회로의 동작과 순서 제어, 시작과 종료하는 메모리 번지의 생성과 같은 제어 프로그램을 수행한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.29-29
• /
• 2000

This paper describes the design and implementation of a high-speed navigation computer to achieve precision navigation performance with Strapdown INS. The navigation computer inputs are velocity and angular increment data from the ISA at the signal of the 2404Hz interrupt and performs the removal of gyro block motion and the compensation of high dynamic errors at the 200Hz. For high-speed and high-accuracy, the computer consists of the 68040 micro-processor, 128k Memories, FPGAs, and so on. We show that the computer satisfies the required performance by In-Run navigation tests.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.21 no.6
• /
• pp.27-33
• /
• 1984

This paper is an experimental gaudy on the digital hardware implementation of the R2-MF Receiver for 32 channel configurations used in signalling systems between ESS. There are many methods to detect MF signal by DSP techniques, but the requirement for MF detection needs not sharp frequency response, needs only decision about some specific frequencies exist or not at discrete frequency sampling points. The hardware used to implement this algorithm is Am 2900 series "bit-slice microprocessor" chips based on the microprogramming techniques for real time signal processing. And we used the additional Z-80A processor chips for the system control and the decision about which is the right MF signal from the detected MF spectrums. Hence we could enhance the flexibilities of the hardware and the software, this leads that this system is well suits for signalling systems used in TDM ESS.n TDM ESS.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.23 no.12
• /
• pp.1673-1678
• /
• 2019

There are various networks and communication methods are used in industrial communication. Enterprises need to convert communications between industrial devices and networks for production line expansion, factory upgrades, network segmentation, and SI. This requires designers manufactured by many manufacturers to provide communication equipment for data or protocol conversion in order to connect and transmit various other mechanical devices to the network. This paper designed industrial communication gateway that can support the transformation of industrial communication protocol using multi-layered communication module. Industrial communication gateways have a structure that connects individual communication modules using RS485 communication to multiple layers. Each communication module consisted of analog and digital data card, LAN, and CAN-enabled card. The main board processor used Atmega micro-processor, and the RS485 slot was placed to have a multi-layer communication module structure. These additive layer type communication modules support analog and digital I/O functions and LAN and CAN for wide use in industrial communication control and monitoring.

• Proceedings of the KIPE Conference
• /
• 2003.07a
• /
• pp.389-392
• /
• 2003

A use of micro processor having H-com functions is gradually increased, and this paper describes the digital servo controller applied to linear pulse motor The TMS320LF2407, made by TI(Texas Instruments Co.), is used as a arithmetic unit in control circuit, designed f3r motor drive and available for the implement of high performance and miniaturization. Also, it can allow the sufficient debugging and downloading into control board for independent operation. A current control in order to carry out a position control is of a digital current control mode, and its implement confirmed the servo control performance of position control.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.4
• /
• pp.267-272
• /
• 1987

In this paper, field oriented control is applied to a 16 bit micro-processor Mc68000 controlled CSI fed induction motor servo drive. The control of induction motor using the principle of its is able to have the transient performance nearly to that of DC motors in the position control. The software and hardware for the Mc68000 is developed. The position control scheme consists of the field oriented control loop and te speed reference pattern generator. The digital computer simlation and experimental results are provided, close agreement between them is obtained.

• Proceedings of the KIEE Conference
• /
• 1987.11a
• /
• pp.355-358
• /
• 1987

A design of digital position control system with DC Motor is presented. The digital position control system is constructed by power circuits, interface circuits and control circuits using single chip microprocessor (8096). All control functions are implemented on the 16 bit micro-processor requiring only on incremental encoder for speed and position sensing. The control schemes are used by the proportional control for some modifications and braking algorithms. This digital position system offered to the fast response, good steady-state accuracy, flexibility and reliability, Hardware, software features and experimental results of this system are described.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.41 no.5
• /
• pp.474-482
• /
• 1992

This paper describes the speed control system of an induction type ac servomotor drive on the vector control basis of slip frequency and constant secondary flux control for a quick torque response. The system is composed of a digital controller using a SCB-V50 microprocessor and a PWM inverter with power MOSFETs for high speed switching. And, for the measurement of actual instantaneous currents, MDCS A070-051 hall sensors are employed. The rising time of step responce by this system through the test of a 600[W] ac servomotor is 30[ms]. Overall experimental result shows that the drive performance of the system is similar to that of a separately excited armature current control of a dc motior.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.29 no.8
• /
• pp.40-48
• /
• 2015

In this paper, battery charging and discharging circuit with a single voltage power supply is proposed. The proposed circuit has the separated current path and charging-monitoring sequence control scheme. In the charging sequence, the proposed 2-level comparator combined with control signal of the micro-processor can control the constant charging current to protect the over current of the battery. Furthermore, the proposed circuit uses a periodic main power switch control to detect the discharging characteristics to estimate the approximated battery life-time. In the experiments, the proposed emergency power supply for emergency call system has 89% efficiency with 98% power factor. And the proposed sequence control scheme is well operated in the designed emergency power system.