• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1998.10a
• /
• pp.273-278
• /
• 1998

In this paper, basic micro-mechanical properties of unidirectional CFRP composite shell such as bonding strength, fiber volume fraction and void fraction are measured and tensile strength test is performed with a fixture. And then fracture surfaces are observed by SEM. In case of basic micro-mechanical properties, bonding strength is reduce with decreasing of radius of each ply in a shell for the effect of residual stress, fiber volume fraction is smaller than plate, and void fraction is vise versa. For these reason, tensile strength of shell is smaller than plate fabricated with same prepreg. For failure mode shell has many splitted part along its length, and it is assumed that this phenomenon is caused by the difference of bonding strength for residual stress.

• Proceedings of the KSR Conference
• /
• 2010.06a
• /
• pp.227-233
• /
• 2010

This paper treats the method to build up Motor drive-circuit using semi-conduct control part like power transistor, MOSEFT and refers to the operation theory, forward, reverse rotation control and speed control method which is changed by PWM. And also, this paper mention to the basic principle of DC Motor and various Motor control method using micro-processor.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.305-309
• /
• 2010

Photopolymer films containing fluorescent anthracene polymer, polymethyleneanthracene (PMAn), were prepared with different concentrations of PMAn for holographic recording useful for security documents. The fluorescent photopolymer film showed enhanced fluorescent intensity due to the micro-separation which arose from grating formation and diffusion during photopolymerization. Experimental values of diffraction efficiency were well matched to the simulated values for photopolymers having different PMAn concentrations. Holography patterning was carried out using the fluorescent photopolymer under a photo-mask. A grating was confirmed using microscope techniques in the recorded area under the pattern. Importantly the recorded area showed enhanced fluorescence compared to the unrecorded part, allowing fluorescence patterns at micro scale along with the submicron grating pattern. The fluorescence pattern recorded on the photopolymer film provides additional readability of holographic reading and thus is useful for secure recording and reading of information.

• Proceedings of the KIEE Conference
• /
• 2006.04a
• /
• pp.165-167
• /
• 2006

In this paper we present a new-generation sensor network processor which is not optimized in circuit level, but in system architecture level. The new design build on a conventional processor architecture, improving the design by focusing on application oriented specification, ISA, and micro-architectural optimization that reduce overall design size and advance energy-per-instruction. The design employs harvard architecture, 8-bit data paths, and an compact 19 bit wide RISC ISA. The design also features a unique interrupt handler which offloads periodical monitoring jobs from the main part of CPU. Our most efficient design is capable of running at 300 KHz (0.3 MIPS) while consuming only about few pJ/instruction.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.585-588
• /
• 2002

In this paper, the current controlled active poler filter(APF) with the performance of reducing harmonic and improving power factor is studied. It has high speed and good performance with low cost. The current controlled shunt APF is proposed, and the control part of APF is designed of SOC(System On Chip). So this system has low expense and good performance. In this study, the micro-controller which designed with VHDL. is applied to APF system. And the proposed technique in this paper demonstrates the excellent of the dedicated micro-controller. VHDL-based ASIC can simplify the process of development and has a competition in market because it reduces the consuming time for the design of IC(Integrated Circuit) in system level.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.21 no.1
• /
• pp.83-94
• /
• 1993

After coming this century, as the propagative method of plants on a scientific foundation has been accompanied systematically, it has played an important part in the improvement of cultivar. But an existing propagative technique is not a few defects in our tasks and industrial structure which changes every hour and envirnment which undergoes a sudden change. To use developed biological knowledge recently, and existing propagative method which is main axis in sexual reproductive crossing, is increased much in the inside of internal organs by asexual reproductive means which is on a different level, and by, introducing a new character, it improves an inherited character etc. We have observed methods which supplement or replace a defect. These methods are not yet ripe for putting to practical use in the present research phase but convinced that they will offer an epoch-marking turning point.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.406-406
• /
• 2000

In this study, as a part developing an unmanned container terminal (UCT), Ive designed and implemented an Autonomous Ground Vehicle (AGV) that can deliver containers in the port fast and safely as they are scheduled. It is preferable to research the intelligent UCT/AGV for delivering containers all day long without causing any trouble. For the sake of safe and fast AGV driving, we implemented a multiple-sensor system with vision, ultrasonic, and IR sensors and we adapted the hight-speed wireless LAN that satisfies the IEEE 802.11 Standard for hi-directional communication between the main processor in AGV and a host computer. The Pentium-III processor board mounted on the bottom frame in AGV combines and computes the information from sensors and controls the AGV driving. There are also the 80C196KC micro-controllers to control the actuating and steering motors. In addition, a steering function that is defined newly in this paper is heavily concerned in the mechanical design, and it plays an important role when AGV moves along a curve. Experimental results show the fast and safe delivery operations are possible with this UCT/AGV

• Journal of the Korean Society for Precision Engineering
• /
• v.18 no.11
• /
• pp.42-50
• /
• 2001

In this paper, a new technique and theory are proposed which correct the orientation (inclination of a vertical axis) of a cylinder in vertical-micro positioning device. An algorithm for determining the orientation of the cylinder with a pair of displacement sensor units is derived and two types of the correction methods are described. To assess the performance and efficiency of the developed correction technique, the compensation errors originated from the correction algorithm and the machined characteristics of cylinder surface are evaluated from the geometrical considerations and the statistical techniques. Based upon the evaluation results, the maximum compensation error is estimated for the orientation of cylinder and the optimum correction technique is derived.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.6
• /
• pp.845-851
• /
• 1986

This Paper presents micro-computer simulation programs for a pneumatic control system. The simulation programs have been written in BASIC language which is suitable for 6502CPU with 48KB memory and consist of 11 programs which describe the time response and frequency response of the pneumatic actuation system. This simulation package is stored in 51/4 inch floppy diskette. The user requires no simulation expertise on the part of designer. As the result of using this simulation programs for the pneumatic control system with stabilizing tank, it has shown that the response time of the system using air as working medium takes more time to be settled but relatively stable rather than the system using helium.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.10a
• /
• pp.227-230
• /
• 2002

New polishing technique for small parts has been tried out using the principle of particle electromechanics. Common fine abrasives such as alumina, diamond, silicon carbide are dielectric materials which are polarized under an electric field, and a non-uniform electric field makes abrasive particles translate along the field line. Using this principle, We make abrasive particles aggregate in the vicinity of the micro tool which is fir the surface finishing of a small part without contact with it. The behavior of particles is optically measured, and the machined depth of glass is examined.