• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.603-604
• /
• 2008

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.125-126
• /
• 2008

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 제33회 추계학술대회논문집
• /
• pp.289-292
• /
• 2009

본 연구에서는 감광유리를 이용한 PEM 마이크로 연료전지 바이폴라 플레이트의 제작 공정을 확립하고 성능 측정을 수행하였다. 감광유리는 무게가 가볍고 내화학성이 뛰어나며 제작이 용이하다. 비등방성 식각, 열 및 UV 접합, 그리고 금속 층 적층을 통한 MEMS 제작 공정이 확립되었다. 성능 측정 결과 활성화 영역에 은이 적층된 마이크로 연료전지의 성능이 그렇지 않은 것보다 우수하였으며 두 경우에서 측정된 마이크로 연료전지의 성능은 모두 국내외 마이크로 연료전지 연구 수준과 동등한 수준이었다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.143-144
• /
• 2006

In this paper, we proposed XP KMPR-1050 negative tone resist to replace SU-8 resist for multi-layer micro-structures and thick plating mold fabrication using UV-LIGA process. XP KMPR resist proposed in this paper can be easily striped using a common stripping solution such as NMP without damage of micro-structure. The conditions for the fabrication of XP KMPR micro-structure were optimized by adjustment of exposure and post-exposure bake(PEB). The $140{\mu}m$ -thick and an aspect ratio at least 10 micro-structure and multi-layer structures were successfully fabricated through the process conditions. Through-mold electroplating and PR striping of XP KMPR has been successfully demonstrated.

• 한국레이저가공학회지
• /
• 제11권2호
• /
• pp.26-32
• /
• 2008

Micro lens array (MLA) is widely used in information technology (IT) industry fields, for examples such as a projection display, an optical power regulator, a micro mass spectrometer and for medical appliances. Recently, MLA have been fabricated and developed by using a reflow method, micro etching, electroplating, micromachining and laser local heating. Laser local thermal-expansion (LLTE) technology demonstrates the formation of microdots on the surface of polymer substrate, in this paper. We have also investigated the new direct fabrication method of placing the MLA on the surface of a SU-8 photoresist layer. We have obtained the 3D shape of the micro lens processed by UV laser irradiation and have experimentally verified the optimal process conditions.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.914-917
• /
• 2002

Fabrication of micro carbon structures and patterns using laser-assisted chemical vapor deposition is studied. Argon ion laser and ethylene were used to grow micro carbon rod through pyrolytic decomposition of the reaction gas. The influence of reaction gas pressure and incident laser power on the diameter and growth rate of the micro carbon rod was experimentally investigated. The diameter of micro carbon rods increases linearly with respect to the laser power but is almost independent of the reaction gas pressure. Growth rate of the rod changes little with gas pressure when the laser power remains below 1W. When the carbon rod was grown at near threshold laser power, a very smooth surface is obtained on the rod. By continuously moving the focusing lens in the direction of growth, a micro carbon rod with a diameter of 28 ${\mu}{\textrm}{m}$ and aspect ratio of 100 was fabricated.

• 한국정밀공학회지
• /
• 제24권12호
• /
• pp.128-135
• /
• 2007

Micro-channels for a wave micropump have been fabricated using the Stereolithography and UV Photolithography. The micro-channel with a channel height of $500\;{\mu}m$ was fabricated with stereolithography. UV photolithography was used for producing micro-channels with a channel length less than $100\;{\mu}m$. The fabrication process data including spinning rpm, pre-bake and post-bake time, and develop time for single layer and multiple layer 3D micro-structures using SU-8 photo resist are experimentally found. A film mask printed with a 40,000 dpi laser printer was used for UV lithography and micro-structures in the order of tens of micrometers in dimension were successfully fabricated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 춘계학술대회 논문집
• /
• pp.241-244
• /
• 2004

Microlens patterned micro-mold fabrication method for Light Guiding Plate(LGP), kernel part of LCD-BLU(Back Light Unit), was presented. Instead of erosion dot pattern for LCP optical design, microlens pattern, fabricated by LIGA-reflow process, was applied. Optical pattern design method was also developed not only for negative pattern LGP, but also positive pattern LGP. In order to achieve flow balance during the micro-injection molding process and dimensional accuracy, two LGP pattern was made in one micro-mold.

• 한국공작기계학회논문집
• /
• 제14권5호
• /
• pp.13-20
• /
• 2005

Micro EDM process is generally used for machining microholes, cavities, and three dimensional shapes. For machining micro structures, first of all, micro tool electrode is indispensable and WEDG system is proposed for tool fabrication method. When using WEDG, its machining characteristics are highly affected by many EDM parameters such as applied voltage, current, rotation speed, capacitance, and pulse duration. Therefore, the design of experiment is introduced to fully understand the effect of the EDM parameters on machining tool electrode. And an attempt has been made to develop the mathematical model for predicting the size of the tool electrode by calculating spark distance. The suggested model was verified with experiment and predicted working gap distance is in good accord with the measured value.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.74-77
• /
• 2009

Demands for high quality and productivity of precision mechanical parts are increasing greatly nowadays due to the rapid growth of information technologies and convergence industries. Therefore, core technologies for fabrication of precision mechanical parts are the fundamental issues, which are the precision machining, micro powder injection molding technologies, MR polishing, micro polymer processes, micro actuation modules and so on. These technologies are directly related to the mass production of high functional devices and machineries. Therefore, this study investigates the fabrication technologies of micro precision molds for advanced devices for possible commercialization in a near future.