• Journal of Biomedical Engineering Research
• /
• v.28 no.1
• /
• pp.102-107
• /
• 2007

In molecular imaging studies via magnetic resonance imaging, in vivo cell tracking is an important issue for the observation of cell therapy or disease behavior. High resolution imaging and longitudinal study are necessary to track the cell movement. Since the field inhomogeneity extends over several voxels, we have performed the numerical analysis using the sub-voxel method dividing a voxel of MR image into several elements and the information about the field inhomogeneity distribution around the micro-beads. We imbedded ferrite-composite micro-beads with the size of $20-150{\mu}m$ in the subject substituted for cells to induce local field distortion. In the phantom imaging with the isotropic voxel size of $200{\mu}m^3$, we could confirm the feasibility of sub-voxel tracking in a 3.0 T MRI.

• Structural Engineering and Mechanics
• /
• v.18 no.5
• /
• pp.691-707
• /
• 2004

This paper presents the micro-mechanical modeling for predicting concrete behavior under compressive loading. The model is able to represent the heterogeneities in the microstructure up to three phases, i.e., aggregate particles, matrix and interfaces. The smeared crack concept based on non-linear fracture mechanics is implemented in order to formulate the constitutive relation for each component. The splitting tensile strength is considered as a fracture criterion for cracking in micro-level. The finite element method is employed to simulate the model based on plane stress condition by using quadratic triangular elements. The validation of the model is verified by comparing with the experimental results. The influence of tensile strength from both aggregate and matrix phases on the concrete compressive strength is demonstrated. In addition, a guideline on selecting appropriate tensile strength for each phase to obtain specified concrete compressive strength is also presented.

• KSTLE International Journal
• /
• v.7 no.1
• /
• pp.22-26
• /
• 2006

A simple finite element analysis is performed to simulate the thermal characteristics of a micro sensor package with thin film heater embedded in the glass wall of a micro-channel. In this paper, Electric characteristics of ITO sputtered heater were presented in this study, which can be used as a map of heater design in the range of available system temperature. The effects of thermo-physical properties of materials, geometrical structure and boundary condition on the thermal performance are also investigated. Finally, the design of micro-flow induced thermal sensor that is capable of measuring fluid flow with a lower flow detection limit of approximately 24pL/s is presented.

• Proceedings of the Korean Magnestics Society Conference
• /
• 2003.12a
• /
• pp.265-265
• /
• 2003

• Journal of the Optical Society of Korea
• /
• v.8 no.1
• /
• pp.21-28
• /
• 2004

When femtosecond laser pulses are focused inside the bulk of transparent materials, the intensity in the focal volume becomes high enough to produce permanent structural modifications. This technique has been applied to fabricate three-dimensional photonic structures such as optical memory, waveguides, gratings, and couplers inside a wide variety of transparent materials. In this paper, we review the fabrication of optical elements in glasses with femtosecond laser pulses, including the fabrication of waveguides, couplers, Bragg gratings, zone plates, holographic memory, and micro holes.

• Journal of Plant Biotechnology
• /
• v.35 no.4
• /
• pp.257-263
• /
• 2008

Improvement of the macro- and micro-elements density of rice (Oryza sativa L.) is gradually becoming a new breeding objective. In this study, the genomic regions associated with potassium, calcium, magnesium and iron content in rice grain were identified and characterized by using a doubled haploid (DH) population. Fifty-six simple sequence repeat (SSR) and one hundred and twelve sequence tagged site (STS) markers were selected to construct the genetic linkage map of the DH population with a full length of 1808.3cM scanning 12 rice chromosomes. Quantitative trait loci (QTLs) were detected, and QTL effects and QTL interactions were calculated for five traits related to macro- and micro-elements in the DH population from a cross between 'Samgang' (Tongil) and 'Nagdong' (Japonica). Twelve QTLs were located on five chromosomes, consisting of two QTLs for potassium, three QTLs for calcium, two QTLs for magnesium, one QTL for iron content and four QTLs for the ratio of magnesium to potassium (Mg/K). Among them, qca1.1 was detected on chromosome 1 with an LOD value of 8.58 for calcium content. It explained 27% of phenotype variations with increasing effects from 'Samgang' allele. Furthermore, fifteen epistatic combinations with significant interactions were observed on ten chromosomes for five traits, which totally accounted for 4.19% to 12.72% of phenotype variations. The screening of relatively accurate QTLs will contribute to increase the efficiency of marker-assisted selection (MAS), and to accelerate the establishment of near-isogenic lines (NILs) and QTL pyramiding.

• Journal of the Optical Society of Korea
• /
• v.17 no.5
• /
• pp.447-453
• /
• 2013

A micro zoom system without moving elements by use of two liquid lenses is designed and optimized in this paper. The zoom equations of the system composed of two liquid lenses are deduced. The structure parameters including radius and thickness of a conical double-liquid electrowetting based lens are analyzed and calculated. Because the liquid thickness varies non-linearly with the radius of the interface, it's very difficult to optimize a real liquid lens using commercial optical design software directly. Through the Application Programming Interface (API) of the optical design software CODE V, a zoom system with two real electrowetting based liquid lenses is modeled and optimized. A two-liquid-lens zoom system without moving elements, with a zoom factor of 1.8 and a compact structure of 10 mm is designed for illustration. This can be useful for the camera design of mobile phones, tablets and so on. And this paper presents a convenient way of designing and optimizing a zoom system including liquid lenses by commercial optical design software.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.159-159
• /
• 2009

Existence of physical moving parts (ex. check valve) produces several problems (mechanical abrasion, deterioration of reliability, limited temperature performances etc.) in driving pumps. To overcome such problems, we proposed a valveless piezoelectric micro-pump which has new type volume transferring mechanism. The proposed micro-pump has a double faced disk type vibrator that can generate peristaltic motion formed by traveling wave in each surface of a disk. This type of micro-pump is able to apply to a fluid supply system that provides two different kinds of fluid simultaneously. In this paper, we propose a simple and novel design of piezoelectric micro-pump that is peristaltically by piezoelectric actuators and allows the removal of the need for valves of other physically moving parts. The finite elements analysis on the proposed pump model was carried out to verify its operation principle using the commercial analysis software.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.7 s.172
• /
• pp.164-169
• /
• 2005

The micro-gripper system is one of the systems that should be improved in the respect of performance for practical usage. In the previous works, the important issues are considered and presented using axiomatic design approach. In this paper, the functional requirements and design parameters are evaluated in order to improve the performance and efficiency of the system. The evaluation is a very difficult task since many variables are related to the outcomes. To provide a basis for correct design decisions, axiomatic design principles have been advanced. Since the framework of axiomatic design makes design issues easier to understand when they are analyzed, we used those as an evaluation tool. The object of the system is to handle micro-size parts. Main device is a micro-gripper using two bender-typed and one stack-typed PZTs as actuators. And it has three tips made of tungsten wires fur holding function. Also the system must satisfy other functional requirements for appropriate handling performance. The results of this study show design improvements of micro-gripper system such as structural change of gripper, additional element, and integration of physical parts. Axiomatic design guides presented suitable design parameters corresponding to functional requirements and made the design elements improve through diagrams of whole system.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.47 no.1
• /
• pp.26-38
• /
• 2019

This study is based on the analysis of the characteristics of waterfront scenery. Recently, waterfront development has expanded residentially, commercially and into leisure space. In the development of the waterfront, it is necessary to apply designs suitable for urban and various other waterfront areas. In this study, the natural scenery of the waterfront was researched with respect to the Korean Jingyeong landscape paintings and the main elements of the scenery were analyzed. In this study, 105 painting of Korean Jingyeong landscapes paintings were selected for the analysis of the waterside scenery. The paintings of Jeong Seon were studied to categorize streams topographically into mountainous, upper, middle, lower, and ocean types. In addition, major micro-topography elements, which are 13 water image elements and 13 staffage elements were analyzed. The main waterfront landscape elements are divided into 13 types. The waterfalls were divided into long waterfalls, short waterfalls, cascading waterfalls, and other aspects considered were line stream, curve stream, multi-curve stream, pond, water surface, flow surface, wave surface, rock side, pile sandy side, sandy side. There are 13 kinds of staffage elements, include pine forest, pine trees, fir trees, bamboo trees, willow trees, broadleaf tree, villages, houses, gazebo, boat, bridges, and people. The waterfront landscape by a river area was explained according to each characteristic of the waterfront landscape and staffage, and their changes were analyzed in each area. The 105 paintings were divided into 35 pieces of mountainous streams, 9 upper streams, 5 middle streams, 35 lower streams, and 21 oceans, and the change of each waterfront landscape and staffage was analyzed. Based on the topographical analysis of the waterfront landscape and staffage, the results can be summarized into 5 types of the waterfront landscape. Based on the micro-topographical characteristics of the waterfront landscape styles are as follow. In the mountainous streams, long waterfall and deep forest type are apparent, which depicts deep mountain waterfall scenery, and a multi-stream forest is the scenery of a picnic in the mountains, which is a representative form of mountainous streams landscape. In the upper-middle stream, the water-surface and gazebo type is predominant. In the lower stream, the sandy-gazebo typ scenery is predominant and the sandy depiction is unique to lower stream landscape. Pile sandy-dock type is life scenes where human activity highlighted, is a representative form of the lower stream landscapes. The characteristic of the coastal landscape is the serpentine rock scenery on the beach and the wave-serpentine rock type that forms the main coastal landscape. The study aims to propose significant design elements for a natural waterfront landscape planning based on the analysis of landscape in the paintings of Jeong Seon.