• 설비공학논문집
• /
• 제23권1호
• /
• pp.16-22
• /
• 2011

The objective of the present study is to investigate the dividing two-phase flow in a horizontal micro T-junction with the same rectangular cross section, $800\;{\mu}m{\times}800\;{\mu}m$, experimentally. Air and water were used as the test fluids. The superficial velocity ranges of air and water were 15~20 m/s and 0.11~0.2 m/s, respectively. Dividing flow characteristics at the micro T-junction are different from those at the larger T-junctions (5~10 mm in hydraulic diameter). Compared with the results of previous works related with the T-junction with mini cross sections (about 5 mm), for lower range of gas separation, the fraction of the liquid separated through the branch decreases for the fixed fraction of the gas separation. But for higher range of gas separation, higher liquid separation could be found.

• 한국가시화정보학회지
• /
• 제1권1호
• /
• pp.75-81
• /
• 2003

A custom micro-PIV optics assembly has been used to measure the flow fold inside a T-junction of a microchannel. The micro-PIV system consists of microscope objectives of various magnifications, a dichroic cube, and an 8-bit CCD camera. Fluorescent particles of diameters 620 nm have been used with a Nd:YAG laser and color filters. A programmable syringe pump with Teflon tubings were used to inject particle-seeded distilled water into the channel at flow rates of 2.0, 4.0, 6.0 mL/hr. The micro-channels are fabricated with PDMS with a silicon mold, then O$_{2}$ -ion bonded onto a slide glass. Results show differences in flow characteristics and resolution according to fluid injection rates, and magnifications, respectively. The results include PIV data with vector-to-vector distances of 2 $\mu$m with 32 pixel-square interrogation windows at 50$\%$ overlap.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.407-410
• /
• 2006

This study describes a simulation of two-dimensional bubble forming and motion by the Lattice Boltzmann Method with the phase field equation. The free energy model is used to treat the interfacial force and deformation of binary fluids system, drawn into a T-junction the micro channel. A numerical simulation of a binary flow in a cross-junction channel is carried out by using the parallel computation method. The aim in this investigation is to examine the applicability of LBM to numerical analysis of binary fluid separation and motion in the micro channel.

• 대한기계학회논문집B
• /
• 제40권4호
• /
• pp.227-236
• /
• 2016

본 논문에서는 $600{\times}600{\mu}m$ 사각 마이크로 채널에서 T자형 합류지점에서의 기체 및 액체의 주입방법이 기포 및 액체 슬러그의 생성에 미치는 영향을 실험을 통해 살펴보았다. 실험 유체로는 질소와 물을 사용하였으며, 액체 및 기체 겉보기 속도는 각각 0.05 - 1 m/s, 0.1 - 1 m/s 의 범위로 테일러 유동이 나타나는 구간에서 데이터를 얻었다. 기포 길이, 액체 슬러그 길이, 기포 속도 그리고 기포 생성 빈도를 고속 카메라를 사용하여 이미지 분석을 통해 측정하였다. 유사한 입구 겉보기 속도 조건에서, T-자형 합류지점의 main channel에 기체를 주입하는 방법(T_gas-liquid)이 액체를 주입하는 방법(T_liquid-gas)보다 기포와 액체 슬러그의 길이가 길었고 기포 생성 빈도는 낮았다. 한편, 두 주입방법에서 기포 속도는 유사하게 나타났다. T_liquid-gas 주입방법의 기존 예측 상관식은 T_gas-liquid 주입방법의 기포 길이, 기포 속도, 액체 슬러그 길이, 기포 생성 빈도 실험데이터를 각각 ~24 %, ~9 %, ~39 %, ~55 %로 예측하였다.

• 한국자기학회:학술대회 개요집
• /
• 한국자기학회 2005년도 하계학술연구발표회 논문개요집
• /
• pp.90-90
• /
• 2005

• Journal of Power Electronics
• /
• 제5권4호
• /
• pp.247-256
• /
• 2005

In order to harvest power in an efficient manner from a micro piezoelectric (PZT) device for charging the battery of a remote system, a new AC/DC resonant pulse power converter is proposed. The proposed power converter has two stages in the power conversion process. The first stage includes N-type MOSFET full bridge rectifier. The second stage includes a boost converter having an N-type MOSFET and a P-type MOSFET. MOSFETs work in the $1^{st}$ or $3^{rd}$ quadrant region. A small inductor for the boost converter is assigned in order to make the size of the power converter as small as possible, which makes the on-interval of the MOSFET switch of the boost converter ultimately short. Due to this short on-interval, the parasitic junction capacitances of MOSFETs affect the performance of the power converter system. In this paper, the performance of the new converter is analytically and experimentally evaluated with consideration of the parasitic capacitance of switching devices.

• 대한치과보철학회지
• /
• 제48권4호
• /
• pp.301-307
• /
• 2010

연구 목적: 이번 연구의 목적은 법랑질 두께를 측정하는데 있어 microCT의 정확성을 평가하고, 한국인의 상악전치 법랑질 두께를 알아봄으로써 임상에 도움을 주고자 한다. 연구 재료 및 방법: 발거된 상악 중절치 5개를 레진 포매하여 치아 장축을 따라 정중부에서 협설로 절단하고 연마한 후에 microCT를 촬영하여 scanning electron microscope 상(${\times}20$)에서와 microCT 상에서 거의 동일한 절단면을 구현하였고, 각각 백악법랑경계 상방 1, 3, 5 mm 부위의 협측 법랑질 두께를 측정하여 microCT의 정확성을 평가하였다. 또한 상악 중절치 26개와 측절치 11개를 이용하여 각 치아의 순측 정중부와 정중부에서 근원심으로 각각 2 mm 떨어진 선상에서 백악법랑경계의 상방 1, 3, 5 mm 지점의 법랑질 두께를 측정하였다. 정중부의 세 지점에서는 정중부를 지나는 시상면에서 법랑질 표면에 접선을 그어 이 접선에 수직으로 법랑상아경계까지 수선을 내려 법랑질 두께를 측정하였고, 근원심 2 mm를 지나는 선상에 있는 6개 지점에서는 각 지점을 지나는 수평면에서 법랑질 표면에 접선을 그어 이 접선에 수직으로 법랑상아경계까지 수선을 내려 법랑질 두께를 측정하였다. 결과: 동일한 절단면에서 주사전자현미경과 microCT를 이용하여 백악법랑경계 상방 1, 3, 5 mm 지점의 순면 법랑질 두께를 측정한 값은 평균 3.81% 차이가 났으나, independent t-test 결과 두 가지 방법에 의한 측정값은 통계적으로 유의한 차이가 없었다. 상악 중절치의 정중부에서 백악법랑경계 1, 3, 5 mm 상방의 순면 법랑질 두께는 각각 $0.32{\pm}0.01$, $0.50{\pm}0.02$, $0.70{\pm}0.02\;mm$로 나타났다. 상악 측절치의 정중부에서 백악법랑경계 1, 3, 5 mm 상방의 순면 법랑질 두께는 각각 $0.30{\pm}0.01$, $0.55{\pm}0.03$, $0.80{\pm}0.02\;mm$로 나타났다. 결론: 법랑질 두께를 측정하는데 있어 microCT는 유용한 측정방법의 하나이며, 이번 연구의 결과로 볼 때 한국인의 상악전치부 도재 라미네이트 수복시 법랑질의 삭제량에 주의를 기울일 필요가 있는 것으로 사료된다.

• 한국생산제조학회지
• /
• 제23권4호
• /
• pp.345-349
• /
• 2014

In this study, an age-hardened 6061-T6 alloy sheet was used, which is commonly utilized for auto parts. The junction strength characteristics in relation to the stirring speed and welding speed were studied in accordance with the friction stir welding rotation of the tool pin. Micro hardness measurements of A type and B type pins, for a welding speed of 400 mm/min and a tool rotational speed 3000 rpm, were obtained as Hv104 and Hv111, respectively. For a welding speed of 200 mm/min and a tool rotational speed of 2000 rpm, we obtained Hv48 and Hv50 for A and B type pins, respectively. Microstructure observation showed that the stirring portion was fine and uniform, which occurred because of its plastic deformation. In the thermomechanically affected zone, partial recrystallization was present because of the plastic deformation. The crystal grains in the heat affected zone were coarsened due to the heat generated by friction stir welding.

• 한국광물학회:학술대회논문집
• /
• 한국암석학회.한국광물학회 2002년도 공동학술발표회 한국암석학회 창립10주년 기념 국제학술발표회
• /
• pp.1-3
• /
• 2002

The eastward extension of the suture zone between the Sino-Korea and Yangtze cratons in the Korean Peninsula and Japanese islands remains debatable (Hiroi, 1981; Cluzel et al., 1991; Yin and Nie, 1993; Sohma and Kunugiza, 1993; Isozaki, 1997; Arakawa et at., 2000), and is related to our understanding of the continent-continent collision orogeny. The collision orogeny varies in tectono-metamorphic processes and the timing differs from place to place, as exemplified by the absence of coesite and micro-diamond in the Korean Peninsula and Japanese islands, because it is a long-lived process of more than several tens of million years from subduction to exhumation in the Wilson cycle, and because the suture zone extends more than several thousand kilometers with a curved shape from the Qinling area of China to the Hida highland area of Japan. Hiroi (1981) is the first paper to correlate the Unazuki metamorphic rocks of the Hida metamorphic belt in Japan with the Ogcheon belt in the Korean Peninsula based on the presence of 240 Ma medium P/T metamorphic rocks in both belts, but there is a lack of recent studies on this correlation. To resolve the correlationship, there are two approaches: 1) petrological studies characterizing the origin and P-T history of rocks and 2) in-situ micro-dating of fine-grained, zoned minerals of zircon, monazite, uraninite and thorite using the EPMA (U-Th-Pb chemical dating or CHIME depending on calibration method) and the SHRIMP (Sensitive High-resolution ion Microprobe) to decipher the timing of geological events. As a first step of these approaches, micro-dating was undertaken to rocks of the Hida metamorphic belt and its Mesozoic cover (Tetori Group) in the Hida highland area, central Japan.