• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.669-669
• /
• 2013

Hierarchical N doped TiO2 nanostructured catalyst with micro, meso and macro porosity have been synthesized by a facile self-formation route using ammonia and titanium isopropoxide precursor. The samples were calcined in different calcination temperature ranging from $300^{\circ}C$ to $800^{\circ}C$ at slow heating rate ($5^{\circ}C$/min) and designated as NHPT-300 to NHPT-800. $TiO_2$ nanostructured catalyst have been characterized by physico-chemical and spectroscopy methods to explore the structural, electronic and optical properties. UV-Vis diffuse reflectance spectra confirmed the red shift and band gap narrowing due to the doping of N species in TiO2 nanoporous catalyst. Hierarchical macro porosity with fibrous channel patterning was observed (confirmed from FESEM) and well preserved even after calcination at $800^{\circ}C$, indicating the thermal stability. BET results showed that micro and mesoporosity was lost after $500^{\circ}C$ calcination. The photocatalytic activity has been evaluated for methanol oxidation to formaldehyde in visible light. The enhanced photocatalytic activity is attributed to combined synergetic effect of N doping for visible light absorption, micro and mesoporosity for increase of effective surface area and light harvestation, and hierarchical macroporous fibrous structure for multiple reflection and effective charge transfer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.161-166
• /
• 2005

The plasma ion density in AC-PDP has shown to be increased from $5.6{\times}10^{11}cm^{-3}$ to $9.0{\times}10^{11)cm^{-3}$ as the Xe mixture ratio to neon increase from 1 % to 10 %, respectively, at fixed pressure of 400 Torr, by using the micro-Langmuir probe. It is noted that the plasma ion density is density increases as the gas pressure increases in this experiment. The electron temperature decreases from 2.3 to 1.2 eV as the Xe mole fraction increases from 1 % to 10 % at fixed pressure of 400 Torr, which is measured by the micro Langmuir probe and high-speed ICCD camera in this experiment. It is noted that the electron temperature decreases as the gas pressure increases from 150 to 400 Torr in this experiment. It is also observed that the exited Xe atom density and the plasma ion density are in strong correlation sharp between each other in this experiment. It is noted that $5.2{\times}10^{12}cm^{-3}$ in the $1s_5$ metastable state and $1.2{\times}10^{12}cm^{-3}$ in the $1s_4$ resonance state for the PDP cell with gap of 50 um distances under the fixed gas pressure of 400 Torr and Xe content ratio of 10 %.

• Journal of Radiation Protection and Research
• /
• 제30권2호
• /
• pp.69-75
• /
• 2005

기체전자증폭기(GEM, gas electron multiplier)는 동박이 양면으로 도포된 절연기관에 미세구멍배열을 형성한 박막으로 기존의 기체형 방사선 검출기의 미약한 방사선 신호를 증폭하기 위해 널리 사용되어지고 있다. 미세구멍 내부에 강한 전기장을 형성함으로써 이 내부로 유입되는 전자에 충분한 에너지를 전달, 전자사태를 유도하는 원리를 이용한다. 따라서 GEM의 특성은 GEM을 포함한 방사선 검출기에 인가되는 전압 즉, 전기장의 분포에 의해 결정된다. 따라서 올바르지 못한 전기장의 분포에 대해서는 신호 전자가 수집전극으로 향하지 못하고, GEM의 상 하단의 전극으로 이동, 신호의 손실을 초래할 수도 있다. 본 논문에서는 GEM의 가장 중요한 성능 지표 중 하나인 1차 전자수집효율(primary electron collection efficiency)을 계산하였다. 방사선에 의해 발생된 전자는 전기력선을 따라서만 움직인다는 가정 하에, GEM의 단위 구조에 대해 표류전극에서의 전기력선의 수에 대한 수집전극에서의 전기력선의 수의 비로 전자수집효율을 계산하였다. 전기력선의 계산은 3차원 유한요소법을 이용하여 계산하였다. 본 논문에서 사용한 방법은 가장 이상적인 상황으로 국한되지만, GEM의 설계 및 최적 운전변수 도출에 유용하게 사용될 수 있을 것이다.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2008년도 추계학술대회논문집
• /
• pp.368-371
• /
• 2008

Cellulose based Electroactive Paper (EAPap) has been developed as a new smart material due to its advantages of piezoelectricity, large displacement, low power consumption, low cost and flexibility. EAPap can be used fur a surface acoustic wave (SAW) device using the piezoelectric property of EAPap, resulting in the cost effective and flexible SAW device. In this paper, inter digit transducer (IDT) structure using lift-off technique with a finger gap of $10{\mu}m$ was used for micro fabrication of the cellulose EAPap SAW devices. The performance of IDT patterned SAW device was characterized by a Network Analyzer. The feasibility of cellulose EAPap as a potential acoustic device was presented and explained.

• 한국정밀공학회지
• /
• 제31권4호
• /
• pp.353-358
• /
• 2014

This paper reports a simple, yet effective 1-step surface modification method for stainless steel. Electrochemical etching in dilute Aqua Regia forms hierarchical micro and nanoscale structure on the surface. The surface becomes highly hydrophobic (${\sim}150^{\circ}$) as a result of the etching in terms of static contact angle (CA). However the liquid drops easily pinned on the surface because of high contact angle hysteresis (CAH), which is called a "petal effect": The petal effect occur because of gap between surface microstructures, despite of intrinsic hydrophobicity of the base material. The pore size and period of surface structure can be controlled by applied voltage during the etching. This method can be applied to wide variety of industrial demand for surface modification, while maintaining the advantageous anti-corrosion property of stainless steel.

• 동력기계공학회지
• /
• 제3권4호
• /
• pp.57-62
• /
• 1999

The microaccelerometer using a tunnelling current effect concept has the potential of high performance, although it requires slightly complex signal-processing circuit for servo-system. The paddle of micro accelerometer is pulled to have the gap width of about 2nm which almost allows the flow tunnelling current. This paper demonstrates at capacitor of microaccelerometer the use of the coupled thermo-electric analysis for voltage, current, heat flux and Joule heating then tunnelling current flows. Two electrodes are applied to the microaccelerometer producing a unform difference of temperature gradient and electric potential between the paddle and the substrate.

• Journal of Welding and Joining
• /
• 제21권4호
• /
• pp.25-30
• /
• 2003

There have been many researches for small scale packages such as CSP, BGA, and Flipchip. Underfill encapsulant technology is one of the latest assembly technologies. The underfill encapsulant could enhance the reliability of the packages by flowing into the gap between die and substrate. In this paper, the effects of underfill packages by both aspects of thermal and mechanical reliabilities are studied. Especially, it is focused to value board-level reliability whether by the underfill is applied or not. First of all, The predicted thermal fatigue lifes of underfilled and no underfilled $\mu$ BGA solder joints are performed by Coffin-Manson's equation and FEA program, ANSYS(version 5.62). Also, the thermal fatigue lifes of $\mu$ BGA solder joints are experimented by thermal cycle test during the temperature, 218K to 423k. Consequently, both experimental and numerical study show that $\mu$ BGA with underfill has over ten times better fatigue lift than $\mu$ BGA without underfill.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.666-666
• /
• 2013

CIGS solar cell에서 p-type semiconductor역할을 수행하는 Cu(In,Ga)Se로 이루어진 Absorber layer는 4 element multi binary compound로 stoichiometry 측면에서 다양한 형태가 나타나기 때문에 태양전지 효율을 향상시키기 위해 이에 대한 연구가 활발하다. 우리는 E-beam evaporation 방법으로 다양한 조건의 multi layer로 증착된 CIG layer 위에 일정 두께의 Se을 증착하면서 열처리 조건에 따른 Selenization 메커니즘에 대한 연구를 수행하였다. 결과분석을 위해(in-situ High Temperature) XRD, XPS, Micro Raman spectroscopy, FE-SEM, (Nano Indentor, Atomic Force Microscopy) 등을 이용하여 결정구조, 결정화도, Depth profile, Eg (band gap energy) 등을 알아보고 분석결과간의 상관관계를 고찰하였다.

• International Journal of Control, Automation, and Systems
• /
• 제5권1호
• /
• pp.35-42
• /
• 2007

This paper presents an INS(Inertial Navigation System) grade, surface micro-machined differential resonant accelerometer(DRXL) manufactured by an epitaxially grown thick poly silicon process. The proposed DRXL system generates a differential digital output upon an applied acceleration, in which frequency transition is measured due to gap dependent electrical stiffness change. To facilitate the resonance dynamics of the electromechanical system, the micromachined DRXL device is packaged by using the wafer level vacuum sealing process. To test the DRXL performance, a nonlinear self-oscillation loop is designed based on the extended describing function technique. The oscillation loop is implemented using discrete electronic elements including precision charge amplifier and hard feedback nonlinearity. The performance test of the DRXL system shows that the sensitivity of the accelerometer is 24 Hz/g and its long term bias stability is about 2 mg($1{\sigma}$) with dynamic range of ${\sigma}70g$.

• 한국생산제조학회지
• /
• 제20권5호
• /
• pp.632-638
• /
• 2011

Recently, it has been studying for the polishing process of micro parts widely. However, present MR polishing system, it is difficult to minimize electromagnet and to polish sphere or slope parts. Then, it can not be obtained demanded surface quality. In this study, material removal characteristics of BK7 glass using round endmill type MR polishing system were investigated through series of experiment. The experiments were investigated by changing imposed polishing conditions, such as rotational speed and polishing depth. As a results, very high material removal was obtained at 0.7mm gap distance, 1,980rpm.