• Composites Research
• /
• 제18권3호
• /
• pp.47-52
• /
• 2005

본 논문에서는 발포 복합재료의 제작을 위한 펄트루전 공정의 최적화에 관한 연구가 수행되었다. 페놀 수지가 기지 재료로 사용된 발포 복합재료는 경량임에도 불구하고 높은 기계적 강도와 열, 화염에 대한 저항력을 지닌다는 장점이 있다. 또한 제조 과정 중의 기포의 핵 생성율과 성장 시간, 생성된 기포의 균일도에 따라서 다양한 특성의 변화를 보이며 이는 공정 중의 가열 온도, 당김 속도, 그리고 포함된 발포제의 양, 초기온도, 경화재의 양 등 여러 요소의 영향을 받는다. 본 연구에서는 주요 공정변수인 가열 온도, 당김 속도 그리고 발포제의 양에 따른 발포 거동을 미세 형상의 관찰을 통해 실험적으로 분석하였다.

• 한국세라믹학회지
• /
• 제50권6호
• /
• pp.518-522
• /
• 2013

This study investigatesthe coloration mechanism by identifying the factor that affects thered coloration of copper red glazesin traditional Korean ceramics. The characteristics of the reduction-fired copper red glaze's sections are analyzed using an optical microscope, Raman spectroscopy, scanning electron microscopy (SEM) and energy dispersive x-ray spectroscopy (EDX). The sections observed using an optical microscope are divided into domains of surface, red-bubble, and red band. According to the Raman micro spectroscopy analysis results, the major characteristic peak is identified as silicate in all three domains, and the intensity of $Cu_2O$ increases toward the red band. In addition, it is confirmed that the most abundant CuO exists in the glaze bubbles. Moreover, CuO and $Cu_2O$ exist as fine particles in a dispersed state in the surface domain. Thus, Cu combined with oxygen is distributed evenly throughout the copper red glaze, and $Cu_2O$ is more concentrated toward the interface between body and glaze. It is also confirmed that CuO is concentrated around the bubbles. Therefore, it is concluded that the red coloration of the copper red glaze is revealed not only through metallic Cu but also through $Cu_2O$ and CuO.

• 상하수도학회지
• /
• 제20권2호
• /
• pp.245-255
• /
• 2006

Dissolved air flotation is a solid-liquid separation system that uses fine bubbles rising from bottom to remove particles in water. In order to enhance the flotation velocity and removal efficiency of flocs in the flotation process, we tried to obtain pretreatment conditions for the optimum DAF process operation by comparing and evaluating features of actual floc formation and flotation velocity etc, according to coagulant types and conditions for flocculation mixing intensity by using PIA, PDA, and FSA. Accordingly, generating big flocs that have low density at low flocculation mixing intensity may reduce treatment efficiency. In addition, generating small flocs at high flocculation mixing intensity makes floc-bubbles smaller, which reduces flotation velocity, In this study, it was found that high flocculation mixing intensity could not remove the remaining micro-particles after flocculation, which had negative effects on treated water quality, Therefore, in order to enhance treatment efficiency in a flotation process, flocculation mixing intensity around $50sec^{-1}$ is effective.

• Nuclear Engineering and Technology
• /
• 제41권9호
• /
• pp.1215-1222
• /
• 2009

The present work pertains to a research program to study Molten Fuel-Coolant Interactions (MFCI), which may occur in a nuclear power plant during a hypothetical severe accident. Dynamics of the hot liquid (melt) droplet and the volatile liquid (coolant) were investigated in the MISTEE (Micro-Interactions in Steam Explosion Experiments) facility by performing well-controlled, externally triggered, single-droplet experiments, using a high-speed visualization system with synchronized digital cinematography and continuous X-ray radiography. The current study is concerned with the MISTEE-NCG test campaign, in which a considerable amount of non-condensable gases (NCG) are present in the film that enfolds the molten droplet. The SHARP images for the MISTEE-NCG tests were analyzed and special attention was given to the morphology (aspect ratio) and dynamics of the air/ vapor bubble, as well as the melt drop preconditioning. Energetics of the vapor explosion (conversion ratio) were also evaluated. The MISTEE-NCG tests showed two main aspects when compared to the MISTEE test series (without entrapped air). First, analysis showed that the melt preconditioning still strongly depends on the coolant subcooling. Second, in respect to the energetics, the tests consistently showed a reduced conversion ratio compared to that of the MISTEE test series.

• 한국습지학회지
• /
• 제23권1호
• /
• pp.54-59
• /
• 2021

폐수처리장에서 발생하는 바이오가스 중의 황화수소를 처리하기 위하여 습식스크러빙 장치가 적용되었다. 유입 H2S의 농도가 5,000mg/L이상에서 DIWS 장치에 물만을 사용할 경우 25%의 제거율을 나타내어 후속으로 소각처리 공정이 도입되어야만 98% 이상의 제거율을 나타냈다. 유입 H2S의 농도가 5,000mg/L일 때 CH4과 CO2는 각각 8.7%와 28.6% 감소하여 배출되었다. DIWS 장치에 중화약품으로 Na2CO3와 NaOH를 사용하였을 때 pH가 11.2~11.5를 유지하면서 H2S는 97.2% 제거되었다.

• 대한조선학회논문집
• /
• 제59권6호
• /
• pp.355-361
• /
• 2022

In order to produce model ice sheets having targeted physical properties in accordance with the law of similitude, the ice model basin of Korea Research Institute of Ships and Ocean Engineering carries out a series of processes such as cooling, seeding, freezing, and tempering. Performance in ice field of ice going ships or marine structures is evaluated from model tests in ice conditions made out of a model ice sheet such as level ice, pack ice, brash ice, and ice rubble field, etc. In this study, we investigated effects of micro-bubble layers and seeding of ice nuclei included in the process generating a model ice sheet on change in physical properties of thickness, density, and flexural strength.

• Tribology and Lubricants
• /
• 제38권4호
• /
• pp.121-127
• /
• 2022

This study presents the development of an integrated oil purification system consisting of moisture removal, oil flushing, and oil filtering devices. In this system, the oil flushing device is combined with a micro-bubble generator. Oil purification is necessary for ensuring the high performance of the lubricant through the efficient removal of contaminants and thus enables good maintenance of mechanical systems. The developed purification system removes moisture, varnish, and solid particles. Moreover, during oil purification, the oil flushing device separates foreign materials and contaminants remaining in the lubricating oil piping or mechanical systems. The microbubble generator, which is combined with the oil flushing device, can separate harmful contaminants, such as sludge, wear particles, and rust, from piping or lubrication systems through the cavitation effect. Moisture is removed using a double high-vacuum chamber, while sludge and varnish are removed via electro-absorption using a high-voltage generator. Additionally, the total maintenance cost of the system is reduced through the use of domestically fabricated cartridge filters composed of glass fiber and cellulose. The heater, which maintains the temperature of the lubricant at 60℃, can process 41,000 L of lubricant simultaneously. Multiple tests confirmed that the proposed integrated purification system exhibits good performance in oil flushing and removal of water and varnish.

• 한국환경과학회지
• /
• 제31권12호
• /
• pp.1061-1068
• /
• 2022

The purpose of this study was to develop a recycling system for ozone off-gas. Although the ozone transmission rate of the injector method differs slightly depending on the ozone injection rate, it reaches approximately 99%, which is very high. During the increase in water inflow to the ozone recycling system from 2 L/min to 10 L/min, the average ozone recycling rate was 99.4% at a 1 ppm ozone injection rate, 98.6% at a 2 ppm ozone injection rate, 98.1% at a 3 ppm ozone injection rate. Ozone treatment facility operating costs can be divided into the costs of pure oxygen production, ozone production, and maintenance. The annual operating costs of ozone treatment facilities in Korea are estimated to be approximately 38.9 billion won. The annual savings are estimated to be approximately 5.8 billion won when the ozone transfer rate of the diffuser method, which is mostly employed in domestic water treatment plants, is 85% and 15% of the ozone is recycled.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2020년도 봄 학술논문 발표대회
• /
• pp.77-78
• /
• 2020

In Korea, more than 30,000 tons of waste Styrofoam are produced every year. Styrofoam is spent more than 500 years decomposing during the reclamation process, so it needs to be recycled. The recycling rate of waste styrofoam continues to be the third highest in the world, but it is lower than that of Germany and Japan. Therefore, measures are needed to increase the recycling rate of waste Styropol. Another problem is that cement is mainly used in existing lightweight foam concrete. However, large amounts of CO2 from cement-producing processes cause environmental pollution. Currently, Korea is increasing its greenhouse gas reduction targets to cope with energy depletion and climate change, and accelerating efforts to identify and implement reduction measures for each sector. In 2013 alone, about 600 million tons of carbon dioxide was generated in the cement industry. Therefore, this study replaces CO2 generation cement with furnace slag fine powder, uses crude steel cement for initial strength development of bubble concrete, and manufactures hardening materials to study its properties using waste styrofoam. As a result of the experiment, the hardening agent replaced by micro powder of furnace slag was less intense and more prone to absorption than cement using ordinary cement. Further experiments on the segmentation and strength replenishment of furnace slag are believed to contribute to the manufacture of environmentally friendly lightweight foam concrete.

• 에너지공학
• /
• 제20권1호
• /
• pp.13-20
• /
• 2011

마이크로 가스터빈의 높은 연료 다양성은 광범위한 범위의 적용처에 적용할 수 있도록 설계되었다. 최근에는 가스터빈 발전시스템의 연료로서, 유기성폐기물의 소화가스와 쓰레기 매립지로부터 발생되는 바이오 가스에 대한 수요가 증가하고 있다. 우리는 매립지 가스를 이용하여 마이크로 가스터빈 열병합 발전시스템의 성능특성 및 운전 특성에 대한 영향을 연구하고 있다. 메탄과 이산화탄소를 동시에 회수하는 공정을 개발하여 현장 실증 플랜트 규모로 시험을 수행하였으며, 유리온실에 농작물의 이산화탄소 고농도 집적을 목적으로 철-킬레이트 화합물을 기본으로 하는 액상촉매를 이용하여 매립지 가스내에 있는 불순물을 저렴한 비용으로 제거하고자 한다. Fe-EDTA(철-킬레이트)를 이용한 내부순환 다판식 기포탑 반응기에 의하여 농축정제와 이산화탄소 제거가 매립지 가스의 최적화 연료화를 추진하였다. 매립지가스의 유량은 0.207 $m^3$/min이고 5.5 kg/$cm^2$의 압력으로 공급되며 메탄농도 70%, 이산화탄소 27%로 공급되도록 농축반응기를 설계하였고 황화수소 99% 제거를 목표로 한다. 유리온실은 마이크로 가스터빈 배가스와 온수를 이용하여 대기중의 이산화탄소 농도에서 1500 ppm의 농도범위로 공급되도록 설계되었다.