센서의 감지막 표면에 흡착되어 있는 이물질을 세척하기 위해 노즐 원리를 도입하여 소형 카트리지를 제작하였다. 세척용 노즐구조는 유동 해석 프로그램(CFD-ACE)의 검증을 통하여 소형 카트리지에 적합하도록 설계하였다. 미세가공기술을 이용하여 제작된 카트리지의 전체 크기는 약 $2.6\;cm{\times}1.5\;cm$이고 세척용 노즐의 크기는 $0.2\;mm{\times}600\;mm$이며, 측정에 필요한 시료의 양은 약 $20\;{\mu}l$이다. REFET과 의사기준전극을 이용한 차동증폭법을 사용하여 기준전극을 소형화하였다. 또한, 미세채널에서 기포로 인한 센서의 오동작을 감지하기 위해 채널 양단에 금속전극을 증착하였다. 제작된 카트리지에 pH-ISFET를 장착하여 노즐에 의한 세척효과를 조사하였다.
페놀수지 원료에 인산 경화제를 사용하여 유리상탄소를 제조할 때, 활성화제인 KOH를 첨가하여 미세구조를 제어하였다. KOH의 첨가량에 따라 수율 및 물성을 조사하였다. KOH를 첨가하지 않고 제조한 유리상탄소는 미세기공을 거의 포함하지 않지만, KOH의 첨가량이 증가될수록 미세구조가 발달하여 KOH/페놀수지 비가 0.9에서 비표면적율 870 $m^2/g$정도까지 증가시킨 다공질의 유리상탄소를 얻을 수 있었다. 탄화수율은 KOH의 첨가량이 증가될수록 감소하여 40% 수준에서 15%까지 떨어졌고, 전기비저항은 50${\times}$$10^{-4}$에서 60${\times}$$10^{-4}$$\Omega$.cm으로 약간 증가하였으며, 물 속에서 측정한 겉보기 밀도는 1.5에서 0.9g/$cm^3$까지 감소하였다.
Jang, Woo Young;Seo, Dong Nam;Park, Jung Gyu;Kim, Hyung Tae;Lee, Sung Min;Kim, Suk Young;Kim, Ik Jin
한국세라믹학회지
/
제53권6호
/
pp.604-609
/
2016
This study reports on wet-foam stability with respect to porous ceramics from a particle-stabilized colloidal suspension that is achieved through the addition of polymethyl methacrylate (PMMA) using a wet process. To stabilize the wet foam, an initial colloidal suspension of $Al_2O_3$ was partially hydrophobized by the surfactant propyl gallate (2 wt.%) and $SiO_2$ was added as a stabilizer. The influence of the PMMA content on the bubble size, pore size, and pore distribution in terms of the contact angle, surface tension, adsorption free energy, and Laplace pressure are described in this paper. The results show a wet-foam stability of more than 83%, which corresponds to a particle free energy of $2.7{\times}10^{-12}J$ and a pressure difference of 61.1 mPa for colloidal particles with 20 wt.% of PMMA beads. It was possible to control the uniform distribution of the open/closed pores by increasing the PMMA content and by adding thick struts, leading to the achievement of a higher-stability wet foam for use in porous ceramics.
본 연구에서는 $\mu$-PD법으로 Er : Mg : $LiNbO_3$화이버 결정을 MgO의 첨가량을 달리하여 성장시켰으며, 첨가물 농도에 따른 성장조건과 PL 특성에 관해 조사하였다. 또한,성장한 결정의 투과 스펙트럼으로부터 Er : Mg : $LiNbO^3$에서 $Er^{3+}$ 의 에너지 준위구조를 계산하였다. Crack과 bubble등의 결함이 없는 결정은 after-beater를 조정하여 0.5 mm/min 이하의 성장속도에서 얻을 수 있었다. MgO의 농도에 따른 PL강도는 0.6 mol% $Er_2O_3$와 3 mol% MgO가 첨가된 Er : Mg : $LiNbO_3$결정에서 가장 강한 형광강도가 관측되었다. 또한, 에너지 준위 $^4S_{3/2}$에서 기저준위로 방출되는 빛이 가장 강했으며 1530 nm의 형광은 비방출천이 및 형광방출 등의 원인에 의한 $^4I_{13/2}$ 준위에서의 여기전자 감소가 형광강도 감소의 원인임을 알 수 있었다.
본 논문에서는 조영증강 초음파영상의 분석과정에서 육안판별의 한계를 극복하기 위한 파라미터 가시화기법을 소개하고, 이 과정에서 영상의 왜곡과 노이즈를 보정하기 위한 방법론을 제시한다. 초음파영상에서 조영제의 전이형태에 대한 동적패턴은 간질환 진단에서 의미있는 파라미터가 되는데, 전이시간 정보와 조영증강 패턴을 정적인 단일영상으로 표현함으로써 급속도로 진행되는 동영상에서 정확한 정보를 효과적으로 판별할 수 있게 한다. 진단파라미터 데이터의 신뢰도를 저하시키는 요인으로 호흡에 의한 흔들림현상과 마이크로 버블에 의한 노이즈를 들 수 있다. 이에 대한 대안으로 영상의 움직임추적을 위한 다단계 알고리즘과 마르코프 랜덤 필드 모델에 기반한 영상개선기법을 제안한다. 실제 임상데이터를 사용한 실험결과를 통하여, 제안된 방법의 유용성을 실험적으로 고찰한다.
In this study, the flow characteristics according to the shape of the vortex nozzle was studied by numerical analysis and the amount of microbubble generation was measured experimentally. The shape of the vortex nozzle is cylindrical, diffuser, and conical type. The axial fluid velocity in the induced tube gradually increased from the inlet to the outlet. In particular, the fluid velocity in the nozzle part increased rapidly. The velocity distribution of the fluid at the inlet of the induced tube showed that the flow rotates counterclockwise in the outer region and the inner center of the induced tube. At the outlet of the induced tube, the cylindrical and conical type showed rotational flow, and the diffuser type showed irregular turbulent flow. The dimensionless pressure ratio 𝜂 of the inner region of the induced tube was lower than that of the outer region. Also, 𝜂 near the outlet of the induced tube in cylindrical and conical type showed a similar tendency to the inlet area. At the outer region of inlet of induced tube, intense vorticity was observed on the wall and in lower region. At the inner region of inlet of induced tube, intense vorticity was observed on the inner wall of the induced tube and in the central region of the inlet of the induced tube. At the outlet of induced tube, in the case of the cylindrical and conical type, intense vorticity was observed near the inner wall, the diffuser type showed irregular strong vorticity inside the tube. The total number of bubbles measured was the most in the cylindrical type, and the microbubbles less than 50mm occurred the most in the conical type.
철강산업의 산 회수설비에서 발생하는 염화수소 가스를 처리하기 위하여 마이크로버블을 발생할 수 있는 습식스크러빙 장치(DIWS)가 도입되었다. 산 회수 설비에서 발생하는 염소가스는 수소 가스와 결합하여 염화수소 가스의 농도를 50% 정도 증가시켰다. DIWS장치에 염소 제거를 위한 Na2S2O3를 투입한 이후의 유입수 염화수소 가스 농도는 13.1 ~13.4 ppm, 유출수는 1.5~1.7 ppm이었고, 제거율은 87.5~88.8%로 안정되게 유지하였다. DIWS는 대기배출기준을 안정적으로 만족함에 따라 현장 적용에 적용할 수 있는 공정으로 판단된다.
Kim, Hae-Ja;Choi, Yun-Hee;Cho, Hwa-Eun;Hong, Hak-Gi;Han, Jung-Ho;Lee, Ki-Nam
대한예방한의학회지
/
제12권2호
/
pp.13-25
/
2008
The purpose of this study was to investigate extract from mixed culture with Trichloloma matsutake mycelium in oriental medicine and cereal medium(OCM) to develop new material for pharmaceutical products and medicinal food for diabetes mellitus. To evaluate of hypoglycemic activity of OCM extracts, we examined the inhibitory activity of ${\alpha}$-glucosidasein OCM, blood glucose level and liver function of streptozotocin(STZ) induced diabetic rat. Experimental group was divided into 6 groups: first, it was divided into normal control group(hereafter NC group) and diabetes-induced group, and diabetes-induced group was subdivided into diabetic control group(DC group), treated by hot water extracts group(HE), ultra sonic waves, micro waves, and micro bubble extracts g roup(UE), crude polysaccharide of HE group (HEE) and crude polysaccharide of UE group(UEE) at a dose of 300mg/kg/body weight, respectively. In diabetic-induced groups, after streptozotocin was melted in 0.01M citrate buffer at 50mg/kg/body weight, when the non-fasting blood glucose levelwas 300 mg/dl or more in blood collected from the tail vein, it was regarded as diabetic induction and then such diabetic-induced experimental animals were used in this experiment. At the end of the experiment, blood glucose level increased by 4.19% in DC group but significantly decreased by 32.34%, 19.19%, 17.81% and 17.64%, respectively in UEEE, UE, HE, and HEE groups. In the cases of AST, ALT, and ALP, the experiment group treated with extracts showed significantly lowerblood glucose level than DC group. The levels of BUN and uric acid were found to be lower in the UMPM extract group(UE) than HW extract group(HE), which implies that herb medicine medium extracts in which Tricholoma matsutake mycelia were cultured are effective in reducing impaired liver function as well as high blood glucose level caused by diabetes. In addition, the administration of low temperature UMPM extracts was found to produce better results than that of high temperature hot water extracts. In this regard, it is expected that extracts from herb medicine obtained by cultivating Tricholoma matsutake mycelia will be widely used as new ingredients for foods and medicines for prevention and treatment of diabetes.
본 연구에서는 동물세포 배양장치를 개발키 위한 기초연구로서 초미세 통기법이 산소 전달 속도와 세포의 생존율에 미치는 영향에 대해 알아보았다. 통기 장치로 통기 구멍 크기가 다른 microsparger 를 사용하였을 때, 모형 반응기 내에서 측정한 산소 전달계수(k$_{L}$a)는 microsprager의 통기 구멍 크기가 작아질수록 현저히 증가하였다. 이는 공기 방울들과 매질 사이의 접촉 면적이 증가했기 때문인 것으로 판단된다. 두 가지 다른 형태의 임펠러 (square-pitch marine impeller 와 $45^{\circ}$) pitched flat blade impller) 를 사용하여 교반하였을 때, $k_{L}$ a 값은 marine impeller 를 사용하였을 때 다소 높았다. $100\mu\textrm{m}$ 이하의 통기 구멍을 가진 microsparger 를 사용하여 직접 통기가 세포에 미치는 손상에 대해 알아본 결과, 세포들의 손상 정도는 통기 속도가 증가할수록, 공기방울 크기가 작아질수록 더 커졌다. 2.5 L 용량의 소형 세포 반응기에 $0.5\mu\textrm{m}$ 의 통기 구멍 크기를 가진 micro-sparger를 장치하여 세포를 배양한 결과 , 지속적인 통기시에는 세포의 생존율이 80% 이하로 떨어지고, 정상적인 성장을 하지 못하였다. 그러나 용존 산소 농도가 20% 이하로 떨어졌을 때에만 통기하였을 때 세포는 정상적으로 자랐으며 세포 생존율도 대수기 전반에 걸쳐 90% 이상을 유지하였다.
2016년부터 배출통제지역(ECA : Emission Control Atea)을 운항하는 선박에 대하여 배출되는 NOx(질소산화물) 및 SOx(황산화물)의 배기량 감소규제가 강화되었다. 상기의 규제 물질 중 NOx를 제거하는 탈질장비 중 선택적 촉매 환원(SCR : Selectivity Catalytic Reduction) 시스템은 효율이 높고 상업적으로 많이 활용되고 있으나, 높은 온도에서 요소수가 활성화되는 단점이 있다. 이에 초미세기포를 이용하여 낮은 온도에서도 반응할 수 있는 요소수 및 요소수 활성화 기기를 개발하여 상기의 문제점들을 최소화 할 수 있도록 하였다. 또한 SCR 시스템의 효율성을 향상시키는 방안을 마련하기 위하여, ANSYS-CFX package를 이용한 전산유체역학(CFD : Computational fluid dynamics)기법을 사용하였다. Navier-Stokes 방정식을 해석의 지배방정식으로 적용하여 SCR 시스템의 점성유동해석 시뮬레이션을 수행하였다. SCR 시스템의 형상은 CATIA V5를 사용하여 3D 모델링을 하였고, SCR 시스템의 효율성을 비교하기 위해 요소수 분사 노즐의 위치를 요소수 분사 노즐은 배기관의 입구로부터 1/3, 1/2, 2/3로 변경하며 확인하였다. 또한, 노즐의 분사구 수가 SCR 시스템의 효율에 미치는 영향을 확인하기 위하여 분사구 수가 4, 6, 8개일 경우를 시뮬레이션 하여 비교 분석하였다. 시뮬레이션 결과 배기관 입구에 가까울수록, 분사구 수가 많을수록 효율이 향상됨을 확인하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.