• Journal of Radiation Protection and Research
• /
• v.10 no.2
• /
• pp.144-147
• /
• 1985

The spontaneous fission rate of $^{238}U$ has been determined using a solid state track recorder that was a pre-etched mica. Counting the tracks revealed in mica made it possible to calculate the spontaneous fission rate. The mica remained in close contact with a $^{238}UO_2$ foil for about five years. The resulting fission rate was $5.21{\pm}0.33$ fissions/g-sec.

• Journal of Electrical Engineering and Technology
• /
• v.4 no.1
• /
• pp.123-130
• /
• 2009

The partial discharge (PD) measurement is a very effective method to assess the winding insulation condition of high-voltage machines, since most of the insulation failure processes are directly or indirectly caused by PD. On-line PD measurements, which can detect insulation defects of winding in the early stages on rotating machines in operation, have been accepted as the most important technique. The epoxy mica capacitive coupler is currently and extensively used for on-line detection of PD pulses of high-voltage rotating machines. To evaluate the feasibility of developing a capacitive coupler that is easier to manufacture at a lower cost compared to epoxy mica couplers, a 100pF capacitive coupler made of ceramic material is designed, fabricated and tested for on-line PD measurements of 23 kV electrical machines. A series of electrical tests and accelerated aging tests are performed on the ceramic coupler to evaluate the performance requirements, long-term reliability and thermal stability for in field application. The test results show that the newly developed ceramic coupler provides equal and improved performance at a lower cost compared to epoxy mica couplers, and estimated voltage life is anticipated to surpass 100 years.

• Macromolecular Research
• /
• v.15 no.5
• /
• pp.449-458
• /
• 2007

The aims of this study were to investigate the intercalation of polymer chains with organoclays and improve the thermo-mechanical properties of poly(butylene terephthalate) (PBT) hybrids by comparing PBT hybrids synthesized using two different organoclays. The organoclays; dodecyltriphenylphosphonium-montmorillonite ($C_{12}PPh-MMT$) and dodecyltriphenylphosphonium-mica ($C_{12}PPh-Mica$), were used to fabricate the PBT hybrid fibers. Variations in the properties of the hybrid fibers with the organoclays within the polymer matrix, as well as the draw ratio (DR), are discussed. The thermo-mechanical properties and morphologies of the PBT hybrid fibers were characterized using differential scanning calorimetry, thermogravimetric analysis, wide-angle X-ray diffraction, electron microscopy and mechanical tensile properties analysis. The nanostructures of the hybrid fibers were determined using both scanning and transmission electron microscopies, which showed some of the clay layers to be well dispersed within the matrix polymer, although some clustered or agglomerated particles were also detected. The thermal properties of the hybrid fibers were found to be better than those of the pure PBT fibers at a DR = 1. The tensile mechanical properties of the $C_{12}PPh-MMT$ hybrid fibers were found to worsen with increasing DR. However, the initial moduli of the $C_{12}PPh-Mica$ hybrid fibers were found to slightly increase on increasing the DR from 1 to 18.

• Annual Conference on Human and Language Technology
• /
• 2022.10a
• /
• pp.210-215
• /
• 2022

최근 전 세계적으로 불안감, 우울증 등을 비롯한 정신 건강 관리에 어려움을 겪고 있다. 특히 COVID-19 팬데믹 사태로 인해 경제적, 사회적으로 고립되는 시간이 길어지면서 정신 건강이 악화되고 있다. 한국의 경우도 심리상담을 받는 비율이 증가하는 등 정신 건강 관리의 수요가 높아지고 있다. 정신 건강 관리를 위한 여러 진입 장벽들을 극복하기 위해 개발된 비대면 심리상담들이 인기를 얻고 있다. 특히, 인공지능 기술과 정신 건강 관리를 결합하려는 시도가 많아지고 있으며, 미국, 중국 등 해외에서는 이미 워봇(Woebot), 유퍼(Youper) 같은 심리상담 챗봇이 상용화되어 서비스 중이다. 그러나 한국에서의 심리상담 챗봇은 아직까지 해외만큼 상용화 단계에 이르지 못했다. 또한, 이러한 챗봇을 구축하기 위한 데이터셋 연구가 부족한 실정이다. 본 논문에서는 익명 심리 플랫폼을 통하여, 심리전문가가 비식별화한 고민과 해당 고민에 대한 전문가 답변을 활용하여 구축한 MICA를 소개한다. 또한, 본 데이터셋을 활용해 딥러닝 기반의 언어 모델을 학습하고 정량적, 정성적 성능 평가를 통해 챗봇의 가능성을 확인하였다.

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.229-234
• /
• 2012

This paper studied the effects of the content and the orientation of the disk shape fillers on the modulus of PP composites. The experimental results were compared with the theoretical calculations which included the three dimensional ellipsoids and analyzed by two aspect ratios, ${\rho}_{\alpha}=a_1/a_3$and ${\rho}_{\beta}=a_1/a_2$proposed by Lee and his researchers. Mica and talc were used as disk shape fillers in the composites. The shapes of mica and talc were observed by SEM and aspect ratios were statistically calculated. For the case of mica, the average aspect ratios were ${\rho}_{\alpha}=13.5$ and ${\rho}_{\beta}=1.8$, and for the case of talc, they were ${\rho}_{\alpha}=3.8$ and ${\rho}_{\beta}=1.4$. Also, the effects of two aspect ratios and the content of filler on the mechanical properties were studied: For 30 wt% of mica, $E_{11}$ increased up to about 2.7 times, and for the other case of talc, $E_{11}$ increased up to about 2.3 times, respectively.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.3286-3291
• /
• 2014

A study on the crack protection and thermal insulation properties of the expanded perlite inorganic composites was performed. Mixed expanded perlite with a water glass was stabilized for 24 hrs at room temperature in the mold and, thereafter, converted into a massive foamed body through complete drying process at $150^{\circ}C$. Aluminum phosphate and micron size mica powder were used as a reaction accelerator and a stabilizer for thermal crack, respectively. Especially, use of mica exhibited a remarkable effect on the protection of thermal crack at higher temperature over $500^{\circ}C$, and thermal conductivity of the composites was enhanced with higher perlite contents, showing ca. 0.09 W/mK for the sample of 100/200/10/1.5 water glass/perlite/mica/Al phosphate by weight. A severe dimensional deformation of the composite materials was observed over $600^{\circ}C$, however, showing a temperature limitation for a practical application. The facts were considered as the results from the glass transition temperature of the water glass, of which main component is sodium silicate.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.47 no.1
• /
• pp.31-40
• /
• 2021

The main stability factors of the pressed powder include hardness and drop stability. In general, for pressed powder with talc, the hardness and drop stability are evenly met and the skin texture is excellent. Recently, more than ever customers are looking for a replacement due to asbestos issue of talc. Therefore, it is urgent to develop a pressed powder formulation without talc that maintains stability and does not lose its sense of use. In this study, experiments were conducted to find the optimal ingredients mixing ratio to make talc-free pressed powder. The characteristics of raw materials used mainly in powder were checked and the ratio was changed, and the lightness and hardness were measured and drop test was conducted. If the natural mica ratio was higher than the synthetic mica or non-coated silica was used instead of the coated silica, the hardness and drop stability were lower than the content containing talc, but the lightness was similar. Conversely, if the synthetic mica ratio was equal to or higher than the natural mica ratio and the coated silica ratio was equal to or higher than the non-coated silica ratio, the hardness and drop stability of the content containing talc were similar, but the lightness was low. It was found that the hardness was higher than the content containing talc, but the drop stability was lower. Therefore, further study of the correlation between hardness and fall stability is also thought to be necessary.

• Journal of the Mineralogical Society of Korea
• /
• v.32 no.3
• /
• pp.223-234
• /
• 2019

The geology of the Samdeok Mo deposit consists of Paleozoic Hwajeonri formation, Kowoonri formation, Suchangri formation, Iwonri formation, Hwanggangri formation, Cretaceous, leucocratic porphyritic granite and granitic porphyry. This deposit consists of three quartz veins that filled NS oriented fractured zones in Suchangri formation. Quartz veins vary from 0.05 m to 0.3 m in thickness and extend to about 400 m in strike length. Quartz veins occur as massive, breccia, and cavity textures. Wallrock alteration has silicification, sericitization, argillitization and chloritization. The mineralogy of the quartz veins consists of quartz, fluorite, white mica, biotite, apatite, monazite, rutile, ilmenite, molybdenite, chalcopyrite, Fe-Mg-Mn oxide and Fe oxide. White mica from Samdeok Mo deposit occurs as fine or coarse grains in quartz vein and hostrock and has four mineral assemblages (I type: quartz, molybdenite, Fe oxide and Fe-Mg-Mn oxide, II type: quartz, Fe oxide and Fe-Mg-Mn oxide, III type: quartz and biotite, and IV type: quartz). The structural formular of white mica from quartz vein is $(K_{0.89-0.60}Na_{0.05-0.00}Ca_{0.01-0.00}Sr_{0.02-0.00})_{0.94-0.62}(Al_{1.54-1.12}Mg_{0.36-0.18}Fe_{0.26-0.09}Mn_{0.04-0.00}Ti_{0.02-0.00}Cr_{0.02-0.00}Zn_{0.01-0.00})_{1.91-1.72}(Si_{3.40-3.11}Al_{0.92-0.60})_{4.00}O_{10}(OH_{1.68-1.42}F_{0.58-0.32})_{2.00}$, but white mica of I type has higher FeO content, and lower $SiO_2$ and MgO contents than white micas of other types. Also, compositional variations in white mica from the Samdeok Mo deposit are caused by phengitic or Tschermark substitution ($(Al^{3+})^{VI}+(Al^{3+})^{IV}{\leftrightarrow}(Fe^{2+}{\text{ or }}Mg^{2+})^{VI}+(Si^{4+})^{IV}$) and direct $(Fe^{3+})^{VI}{\leftrightarrow}(Al^{3+})^{VI}$ substitution.

• Korean Journal of Heritage: History & Science
• /
• v.50 no.4
• /
• pp.122-147
• /
• 2017

The Jungsandong sites are distributed across quartz and mica schist formations in Precambrian, and weathering layers include large amounts of non-plastic minerals such as mica, quartz, felspar, amphibole, chlorite and so on, which form the ground of the site. Neolithic pottery from Jungsandong exhibits various brown colors, and black core is developed along the inner part for some samples, and sharp comb-pattern and hand pressure marks can be observed. Their non-plastic particles have various composition, size distribution, sorting and roundness, so they are classified into four types by their characteristic mineral compositions. I-type (feldspar pottery) is including feldspar as the pain component or mica and quartz. II-type (mica pottery) is the combination of chloritized mica, talc, tremolite and diopside. III-type (talc pottery) is with a very small amount of quartz and mica. IV-type (asbestos pottery) is containing tremolite and a very small amount of talc. The inner and outer colors of Jungsandong pottery are somewhat heterogeneous. I-type pottery group shows differences in red and yellow degree, depending on the content of feldspar, and is similar to III-type pottery. II-type is similar to IV-type, because its red degree is somewhat high. The soil of the site is higher in red and yellow degree than pottery from it. The magnetic susceptibility has very wide range of 0.088 to 7.360(${\times}10^{-3}$ SI unit), but is differentiated according to minerals, main components in each type. The ranges of bulk density and absorption ratio of pottery seem to be 1.6 to 1.7 and 13.1 to 26.0%, respectively. Each type of pottery shows distinct section difference, as porosity and absorption ratio increase in the order as follows: I-type (organic matter fixed sample) < III-type and IV-type < I-type < II-type (including IV-type of IJP-15). The reason is that differences in physical property occur according to kind and size of non-plastic particles. Although Jungsandong pottery consists of mixtures of various materials, the site pottery has a geological condition on which all mineral composition of Jungsandong pottery can be provided. There, it is thought that raw materials can be supplied from weathered zone of quartz and mica schist, around the site. However, different constituent minerals, size and rock fragments are shown, suggesting the possibility that there can be more raw material pits. Thus, it is estimated that there may be difference in clay and weathering degree.

• Proceedings of the KIEE Conference
• /
• 1995.07c
• /
• pp.1314-1316
• /
• 1995

Basic discharge characteristics of a ferroelectric ball and mica sheet double barrier have been studied for learning the fundamentals of the barrier discharges and for checking the potential to be used as a plasma generator. It is found that plasma generation of the plasma generator was influenced greatly by the dielectric constant of the ferroelectric ball barrier and applied power frequency. As a result, there are optimum conditions of the dielectric constant as a barrier and the applied frequency to generate ozone effectively, which were ${\varepsilon}_r$=600 and f=4 kHz at the present experimental case.