• 한국재료학회지
• /
• 제7권8호
• /
• pp.650-653
• /
• 1997

In large generators in power plants, stator winding insulations is exposed to a combination of thermal, electrical, mechanical, environmental stresses in service. These combined stresses cause insulation aging which leads to final insulation breakdown. In order to identify the breakdown mechanism, the stator winding insulation materials which are composed of mica-epoxy is analyzed by the component of materials with EDS, SEM techniques. We concluded that the potassium ions of mica are replaced by hydrogen ions at boundary area of mica-epoxy and/or mica-mica. It is proposed that through these phenomena, the conductive layers of potassium ions enable high voltage fields of multiple stresses to create voids and microcracks.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.58-64
• /
• 2004

The shrinkages of injection molded parts are different in molding operational conditions, resins and additives. The shrinkage of injection molded part for crystalline polymer, PBT (polybutylene terephthalate) has been studied for various operational conditions of injection molding and content of additives. Mica was used as a additive to PBT to examine the part shrinkage according to the mica content. The part shrinkages of mica contained PBT decreased as mica content increases. Higher injection temperature and injection pressure resulted in a lower shrinkage. As mold temperature increases the part shrinkage decreased. The part shrinkage of flow direction was less than that of the perpendicular direction to the flow for both pure and mica contained PBT. However the shrinkage difference between flow and perpendicular to flow directions decreased as mica content increased.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.430-430
• /
• 2011

Graphene, one single atomic layer of graphite, has attracted extensive attention in various research fields since its first isolation from graphite. Application in the future electronics requires better understanding and manipulation of electronic properties of graphene supported on various solid substrates. Here, we present a study on charge doping and morphology of graphene prepared on atomically flat and highly polar mica substrates. Ultra-flat single-layer graphene was prepared by micro-exfoliation of graphite followed by deposition on cleaved mica substrates. Atomic force microscopy (AFM) revealed presence of ultra-thin water films formed in a layer-by-layer manner between graphene and mica substrates. Raman spectroscopy showed that a few angstrom-thick water films efficiently block electron transfer from graphene to mica. Hole doping in graphene caused by underlying mica substrates was also visualized by scanning Kelvin probe microscopy (SKPM).

• Corrosion Science and Technology
• /
• 제9권6호
• /
• pp.265-269
• /
• 2010

This paper describes the exfoliation and surface modification of muscovite mica for UV coating formulation. For the exfoliation of the mica, hydrothermal process was used in the presence of lithium nitrate ($LiNO_3$). After the cation exchange with $Li^+$ ions, the surface of the mica was modified with several amphiphilic substances to increase compatibility and storage stability in UV coating formulation. Such a hydrophobic surface modification affected colloidal stability as well as dispersibility of the exfoliated mica in UV coating solution. Anticorrosive property of mica/UV coated steel plates was tested by salt spray test (SST) and compared with sodium montmorillonite ($Na^+$-MMT)/UV coated steel plates.

• 한국논리학회:학술대회논문집
• /
• 한국논리학회 2009년도 동계학술 발표회
• /
• pp.38-66
• /
• 2009

Weakening-free non-associative fuzzy logics, which are based on mica-norms, are introduced as non-associative substructural logics extending $GL_{e\bot}$ (Non-associative Full Lambek calculus with exchange and constants T, F) introduced by Galatos and Ono (cf. see [10, 11]). First, the mica-norm logic MICAL, which is intended to cope with the tautologies of left-continuous conjunctive mica-norms and their residua, and several axiomatic extensions of it are introduced as weakening-free non-associative fuzzy logics. The algebraic structures corresponding to the systems are then defined, and algebraic completeness results for them are provided. Next, standard completeness (i,e. completeness with respect to algebras whose lattice reduct is the real unit interval [0, 1]) is established for these logics by using Jenei and Montagna-style approach for proving standard completeness in [7, 18].

• 한국재료학회지
• /
• 제14권5호
• /
• pp.343-347
• /
• 2004

We investigated the growth feasibility of polycrystalline Si film on mica substrate for the transfer of the layer to a plastic substrate. The annealing temperature was limited up to $600^{\circ}C$ because of crack development in the mica substrate. Amorphous Si film was deposited on mica substrate by PECVD and was crystallized by furnace annealing. During the annealing, bubbles were formed at the Si/mica interface. The bubble formation was avoided by the Ar-plasma treatment before amorphous Si deposition. A uniform and clean polycrystalline Si film was obtained by coating $NiCl_2$ on the amorphous Si film and annealing at $500^{\circ}C$ for 10 h. The conventional Si lithography was possible on the mica substrate and the devices fabricated on the substrate could be transferred to a plastic substrate.

• 한국세라믹학회지
• /
• 제19권2호
• /
• pp.109-114
• /
• 1982

Fluoro-phlogopite crystals (Mica) were synthesized by two different methods; firstly the crystal was crystallized from the melts, and secondly mica crystalline was obtained from the direct solid state reaction. Addition of $CaF_2$ in the mica batch revealed the lowering the solid state reaction temperature. SEM and XRD were employed to observe mica crystalline flakes and solid solution forms. As a starting raw material Pyrophyllite was used resulting in the formation of mica crystals.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2003년도 컴퓨터소사이어티 추계학술대회논문집
• /
• pp.61-64
• /
• 2003

Technological progress in integrated, low-power, CMOS communication devices and sensors makes a rich design space of networked sensors viable. These sensors can be deeply embedded in the physical world and spread throughout sensor network environment like smart dust. So ubiquitous computing will be come true. SmartDust project is the one of ubiquitous computing approach. It produces TinyOS, mote(mica, mica2, rene2, mica2dot, etc.), NesC, TinyDB, etc. We constructs sensor network test bed and tests to approach sensor network and ubiquitous computing.

• 청정기술
• /
• 제19권3호
• /
• pp.257-263
• /
• 2013

인산아연이 도포된 운모 안료(ZP/mica)를 인산, 질산아연 그리고 운모를 출발물질로 하여 제조한 후, 방청안료로 사용하였다. 주사전자현미경 및 X-선 회절분석기 등을 이용하여 제조된 안료의 형상과 결정구조를 관찰하였다. 제조된 안료와 에폭시수지를 배합하여 도막을 형성시킨 다음 전기화학적 임피던스법을 이용하여 안료의 방청성을 평가하였다. $70^{\circ}C$에서 합성된 ZP/mica 안료의 방청성이 $20^{\circ}C$에서 제조된 안료보다는 우수하다는 것을 알 수 있었다. $70^{\circ}C$에서 합성된 ZP/mica 안료표면에는 $Zn_3(PO_4)_2{\cdot}2H_2O$ 이외에도 ZnO가 동시에 생성되어 있음을 볼 수 있었다. 합성된 ZP/mica 안료의 우수한 방청성은 운모표면의 아연화합물에 의한 전기화학적 방청기구와 판상구조의 운모에 의한 장벽 방청기구의 상승작용에 기인한 것으로 생각된다.

• 한국재료학회지
• /
• 제25권2호
• /
• pp.61-67
• /
• 2015

$Fe_2O_3$ coated plate mica($Fe_2O_3$/mica) for infrared reflectance red pigment was prepared under hydrothermal treatment. $Fe_2O_3$ was perfectly coated on mica via the difference of surface charge between $Fe_2O_3$ and mica particles at pH 3. $Fe_2O_3$/mica was then calcined at $800^{\circ}C$ to stabilize the coated layer on mica. The infrared(IR) reflectance pigments were characterized by X-ray diffraction, FE-SEM, zeta potential, and a UV-Vis-NIR spectrophotometer. In particular, the CIE color coordinate and IR reflectance properties of $Fe_2O_3$/mica pigments were investigated in relation to the thickness variation of the $Fe_2O_3$ layer coated on mica of various lateral sizes. The isolation-heat red paints containing the pigments were prepared and optimized with a thinner, settling agent, and dispersant. Then, the films were made. The thermal property of isolation-heat on these films was observed through the relationship of the IR reflectance value, which was based on the variation of the $Fe_2O_3$ layer's thickness coated on mica and mica's lateral size as IR reflectance pigment. With an increase in IR reflectance on these films, the thermal property of isolation-heat was effectively enhanced.