• 멤브레인
• /
• 제24권1호
• /
• pp.69-77
• /
• 2014

초저압용 나노여과 중공사 복합막을 제조하기 위하여 poly(vinylidene fluoride) (PVDF) 소수성 중공사막 표면에 무기염인 $K_2Cr_2OH$와 $KMnO_4$ 수용액으로 친수화 처리를 하였으며, 처리된 막 표면 위에 piperazine (PIP)과 trimesoyl chloride (TMC)로 계면 중합하여 복합막을 제조하였다. NaCl, $CaSO_4$, $MgCl_2$ 100 ppm 용액 및 300 ppm의 NaCl과 $CaSO_4$ 혼합용액을 이용하여 코팅물질의 농도, 코팅시간 및 건조시간에 따른 복합막의 투과특성을 알아보았다. 실험 결과 친수화 물질로는 $K_2Cr_2OH$을 사용하였을 때 더 높은 배제율을 보였으며, 친수화 시간이 길어질수록 투과도는 향상되고 배제율은 감소하는 경향을 나타내었다. 또한 촉매인 triethyl amine (TEA)과 sodium lauryl sulfate (SLS)의 농도가 높을수록 투과도는 감소하고, 염제거율은 증가하였다. 최적 조건으로는 $K_2Cr_2OH$으로 10분 동안 친수화 시킨 PVDF 중공사막 위에 PIP 2 wt% 용액(PIP 함량 대비 Triethyl amine (TEA) 7 wt%, SLS 20 wt% 혼합용액)과 TMC 0.1 wt%를 이용하여 계면중합한 것으로 공급액 NaCl 100 ppm에 대해서는 투과도 40 LMH, 제거율 50%이었고, $CaSO_4$ 100 ppm에 대해서는 투과도 48 LMH, 제거율 55%를 나타내었다.

• 대한환경공학회지
• /
• 제27권1호
• /
• pp.101-108
• /
• 2005

대부분의 석조문화재는 외부 환경에 노출되어 있어 외관이 크게 변형되어졌고, 특히 최근의 산업화와 환경오염물질의 영향으로 풍화가 가속화되고 있다. 본 연구에서는 석조문화재의 풍화에 미치는 환경영향을 알아보기 위해 산성용액과 염분용액에 신선한 화강암을 침수한 후 물리 화학적 특성을 조사하였고, 석조문화재 보존 방법의 일환으로 화강암에 $TiO_2$ 광촉매를 코팅한 후 코팅이 화강암의 풍화에 미치는 영향도 조사하였다. 산성용액과 염분용액에 신선한 화강암을 침수시켰을 때 8가지 광물성분(Si, Mg, Ca, Na, K, Fe, Mn, Al)의 용출량은 반응초기에 급격히 증가하였고 암석 표면의 구성광물들은 대부분 신선한 화강암(fresh granite)보다 낮은 농도값을 나타내어 산성용액이나 염분용액에 의한 풍화의 영향 정도를 확인할 수 있었다. 실험 전 후의 화강암의 물리적 특성 분석 결과, 강제 풍화시킨 시료의 밀도는 평균 $2.55-2.56\;g/cm^3$으로 신선한 화강암(평균밀도는 $2.60\;g/cm^3$)에 비해 약간 낮은 값을 보였고 압축강도는 신선한 화강암에 배해 아주 낮았지만 포아송비는 상대적으로 약간 높은 값을 나타내었다. 또한 강제풍화시킨 석재의 흡수율은 $0.481{\sim}0.836%$로서 신선한 화강암에 비해 1.2-2.1배 정도 높게 나타났다. $TiO_2$ 광촉매를 화강암에 코팅한 후 산성용액과 염분용액에 의한 강제풍화시 광물성분의 용출율과 함수율 등이 많이 저감되어 석조문화재의 풍화속도를 완화시키는 것으로 나타나 석조문화재의 표면에 $TiO_2$ 코팅 처리를 하면 석조문화재의 풍화를 예방하는 효과가 있을 것으로 나타났다.

• 미생물학회지
• /
• 제37권2호
• /
• pp.130-136
• /
• 2001

두가지 형태(1단 반응기와 2단 반응기)의 UV-$TiO_2$광촉매 시스템과 3가지 형태의 $TiO_2$가 코팅된 촉매를 이용하여 미생물에 대한 살균효과를 살펴보았다. 첫번째 형태는 석영관에 $TiO_2$가 박막증착된 것이고 두번째 형태는 glass bead 표면에 $TiO_2$가 코팅된 형태이며 세번째는 alginate bead에 $TiO_2$가 혼합된 형태이다. 1분동안 UV를 조사하였을때 1단 반응기에서 $TiO_2$가 박막증착된 석영관과 $TiO_2$가 코팅된 glass bead의 살균효율은 각각 63.2%와 89.9%이었다. 반응기에 기포를 주입했을 때의 살균효율은 glass bead의 경우 95%로 기포를 주입하지 않았을 때의 90.6%보다 휠씬 효과적이었다. 기포를 주입하면서 광촉매로 alginate bead에 $TiO_2$가 혼합된 것을 이용하였을 경우의 살균효율은 86%이었다. $TiO_2$가 코팅된 glass bead를 이용한 반응기에 기포를 주입하면서 $H_2$$O_2$를 처리하였을 때의 살균정도는 미량농도에서도 매우 효과적이었다. 1단 반응기보다 2단 반응기에서의 살균효율이 더욱 증가하였으며 E. coli에 대한 살균효과가 S. cerevisiae보다 더 높게 나타났다.

• KSBB Journal
• /
• 제8권4호
• /
• pp.313-319
• /
• 1993

다공성 실리카표변에 폴리에틸렌이민과 글루타르 알데히드로 전화당 효소를 고정화시키고 자당과 에 탄올로부터 메틸 프룩토시드를 합성한 결과 다음과 같은 결론을 얻었다. 다공성 설리카를 폴리에틸렌이 민으로 표면처리하여 얻어진 고정화 담체는 그 다공 성 구조와 표면화학적 특성이 효소의 고정화에 적합 하여 전화당 효소에 대한 고정화 함량 120mg/g, 활 성도 lOOD/mg을 얻어 배당체의 합성반응에서 필요 로 하는 고정화 촉매를 제조할 수 었었으며 고정화 담체 표변에 형성된 폴리에틸렌이민 피막은 효소 부근에 친수성 분위기를 유지하여 높은 효소활성을 나 타내었고 에틸 프룩토시드가 효소에 접근하여 가수 분해되는 반응을 억제하여 메틸 프룩토시드의 수율 과 농도를 크게 증가시켰다. 자당과 메탄올 수용액 으로부터 메틸 프룩토시드를 합성한 결과, 자당 농도 O.291mol/l , 메탄올 농도 30%(v/v), 반응온도 $25^{\circ}C$, pH 4.8, 효소활성도 2U/ml일 때 자당의 전화 율 91.2%, 에틸 프룩토사드 농도 27.0g/l , 그 평균 수율 55.9%을 얻었으며, 위의 연구결과로부터 고정화 효소에 의한 배당체의 합성반응이 연속생산공정 으로 연구개발 될 수 있을 것으로 기대된다.

• 한국재료학회지
• /
• 제23권8호
• /
• pp.430-434
• /
• 2013

Quantum dots(QDs) with their tunable luminescence properties are uniquely suited for use as lumophores in light emitting device. We investigate the microstructural effect on the electroluminescence(EL). Here we report the use of inorganic semiconductors as robust charge transport layers, and demonstrate devices with light emission. We chose mechanically smooth and compositionally amorphous films to prevent electrical shorts. We grew semiconducting oxide films with low free-carrier concentrations to minimize quenching of the QD EL. The hole transport layer(HTL) and electron transport layer(ETL) were chosen to have carrier concentrations and energy-band offsets similar to the QDs so that electron and hole injection into the QD layer was balanced. For the ETL and the HTL, we selected a 40-nm-thick $ZnSnO_x$ with a resistivity of $10{\Omega}{\cdot}cm$, which show bright and uniform emission at a 10 V applied bias. Light emitting uniformity was improved by reducing the rpm of QD spin coating.At a QD concentration of 15.0 mg/mL, we observed bright and uniform electroluminescence at a 12 V applied bias. The significant decrease in QD luminescence can be attributed to the non-uniform QD layers. This suggests that we should control the interface between QD layers and charge transport layers to improve the electroluminescence.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2001년도 추계학술발표회 초록집
• /
• pp.67-67
• /
• 2001

The structure zone model has been used to provide an overview of the relationship between the microstructure of the films deposited by PVD and the most prominent deposition condition.s. B.AMovchan and AV.Demchishin have proposed it firstls such model. They concluded that the general features of the resulting structures could be correlated into three zones depending on $T/T_m$. Here T m is the melting point of the coating material and T is the substrate temperature in kelvines. Zone 1 ($T/Tm_) is dominated by tapered macrograins with domed tops, zone 2 ($O.3) by columnar grains with denser boundaries and zone 3 ($T/T_m>O.5$) by equiaxed grains formed by recrystallization. J.AThomton has extended this model to include the effect of the sputtering gas pressure and found a fourth zone termed zone T(transition zone) consisting of a dense array of poorly defined fibrous grains. R.Messier found that the zone I-T boundary (fourth zone of Thorton) varies in a fashion similar to the film bias potential as a function of gas pressure. However, there has not nearly enough model for explaining the change in morphology with crystal orientation of the films. The structure zone model only provide an information about the morphology of the deposited film. In general, the nucleation and growth mechanism for granular and fine structure of the deposited films are very complex in an PVD technique because the morphology and orientation depend not only on the substrate temperature but also on the energy of deposition of the atoms or ions, the kinetic mechanism between metal atoms and argon or nitrogen gas, and even on the presence of impurities. In order to clarify these relationship, AI and Mg thin films were prepared on SPCC steel substrates by PVD techniques. The influence of gas pressures and bias voltages on their crystal orientation and morphology of the prepared films were investigated by SEM and XRD, respectively. And the effect of crystal orientation and morphology of the prepared films on corrosion resistance was estimated by measuring polarization curves in 3% NaCI solution.

• Journal of Preventive Medicine and Public Health
• /
• 제14권1호
• /
• pp.97-110
• /
• 1981

This study was conducted in order to investigate the status of harmful working environ ment on twelve rubber and ten chemical products manufacturing industries in Busan area over a period of five months from lune 1 to October 31, 1980. The summarized results were as follows: 1. The highest and lowest mean values of harmful environmental elements in workroom of rubber products manufacturing industries were noted in twisting (98.7dB) and coating department (77.3dB) to noise, molding ($6.43mg/m^3$) and forming ($1.33mg/m^3$) to dust, bonding (toluene 463.7ppm, xylene 457.8ppm and benzene 111.8ppm, respectively) and splicing (toluene 90.0ppm, xylene 83.3ppm and benzene 6.7ppm, respectively) to organic solvents, respectively. Also in chemical products manufacturing, they were noted in grinding (95.1dB) and shining department (76.8dB) to noise, packing ($4.30mg/m^3$) and staining ($3.20mg/m^3$) to dust, shining (393.3ppm and 375.0ppm, respectively) and varnishing(125.5ppm and 121.7ppm, respectively) to toluene and xylene, and scattering (51.8ppm) and mixing (23.9ppm) to benzene, respectively. 2. The mean values of harmful elements in workroom of rubber products manufacturing were 86.3dB to noise, $4.16mg/m^3$ to dust, 258.2ppm to toluene, 230.3ppm to xylene, and 5 4.0ppm to benzene, respectively. Also in chemical products manufacturing, they were 85.2dB to noise, $3.69mg/m^3$ to dust, 227.9ppm to toluene, 213.2ppm to xylene, and 36.3ppm to benzene, respectively. 3. Number of workers exposed to harmful working environment, over TLV, of a total 10,195 workers in rubber products manufacturing were 1,002(9.8%) to noise, 212 (2.1%) to dust, 1,581(15.5%) to toluene, 1,509(14,8%) to xylene, and 1,524(15.0%) to benzene, respectively. Number of workers exposed to harmful working environment, over TLV, of a 1,913 workers in chemical products manufacturing were 112(5.9%) to noise, 132(6.9%) to each organic solvent, respectively. 4. The values of noise and dust of rubber and chemical products manufacturing in 1980 were lower then those in 1977, but the value of organic solvent in 1980 was similar with that in 1977.

• Journal of Nutrition and Health
• /
• 제29권9호
• /
• pp.971-980
• /
• 1996

The soluble transferrin receptor(TfR) in human serum has been shown recently to be a truncated form of intact membrane bound receptor containing most of the extracellular domain. We purfied the transferin-free TfR from human serum by immounoaffinity chromatography which produced the single protein identity in high resolution gel chormatography. The monoclonal antibodies(MAb) against purifed serum TfR were produced by fusion of spleen cells o fimmunized Balb/c mice and SP2 cells. Ten hybrids producing MAb specific for serum TfR were identifed and determine their iostypes. A immunoraddiometric assay (IRMA) for serum TfR was established using two monoclonal IgG1 antibodies as the coating and indicator antibodies on the bosis of their suitability in sandwich IRMA of serum TfR. The mean serum TfR levels in the 15 normal male, 15 normal female, and 19 iron-deficient subjects were 5.4$\pm$0.98, 4.6$\pm$0/76, and 18.0$\pm$12.8mg/1, respectively, and the difference in mean values between normal and iron deficient subjects was significant(p=0.0005). There existed the inverse logarithmic relationship(r=-0.9336, p<0.0001) between the serum TfR and ferritin levels.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1534-1535
• /
• 2005

Highly luminescent efficiency phosphors have been successfully produced by surface modification and microwave irradiation treatment. The SEM image and XRD analysis reveal that the surface morphology of the white-light phosphors can be notably modified by microwave irradiation and exhibit with better crystalline property. The VUV PL spectra show that the microwave irradiation treatment can effectively enhance the luminescent efficiency by a factor of 1.5 times for intensity compared to that without microwave treatment. A further improvement in all visible emission can be made by modifying surface composition through MgO coating on the phosphor powder. These results demonstrate that such a simple approach can provide for improving luminescent efficiency of phosphors for the optoelectronic devices.

• 한국가시화정보학회지
• /
• 제18권3호
• /
• pp.61-68
• /
• 2020

Thermographic phosphor (TP) thermometry is a noncontact optical measurement method and has been applied in many fields such as combustion and heat transfer. However, due to the limitation of bonding technology and measurement method, most TP thermometry studies were conducted only on the air environment with water-soluble binders. In this paper, a temperature measurement technology in water using TP is proposed by coatings of manganese activated magnesium fluorogermanate (Mg4FGeO6:Mn4+, MFG) with Polydimethylsiloxane (PDMS). Four MFG-PDMS coatings with different thicknesses were prepared. The lifetime of MFG was not affected by the thickness of the coating as a result of the experiment and analysis of phosphor intensity using a photomultiplier tube. To measure the surface temperature field of an immerged body in water, a cylinder-type cartridge heater was coated with MFG doped PDMS. Transient surface temperature field was successfully measured even the initial temperature is higher than the boiling point of water.