• Proceedings of the KIEE Conference
• /
• 2007.11a
• /
• pp.169-170
• /
• 2007

PDP는 LCD, OLED등과 같은 FPD(Flat Panel Display)들과는 차별화된 우수성을 가지고 있다. 따라서 본 논문에서는 AC-PDP에서의 MgO박막의 material property를 향상시키기 위하여 MgO pellet에 미소량의 Ca를 첨가하였으며 이에 따른 MgO박막을 통해 Ca의 첨가에 따른 효과를 분석하였다. MgO박막은 e-beam evaporation 방법을 사용하였으며 4인치 테스트 패널을 만들어서 방전개시전압, 방전유지전압, 어드레싱지터를 측정하였으며 방전효율은 Ca가 0.025%, 0.035%, 0.042%가 첨가 되었을 때 각각 비교하였으며, 0.035%가 첨가 되었을 때가 가장 좋은 효율을 가진다.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.28 no.2
• /
• pp.57-62
• /
• 2018

In this study, we investigated the impurity effect of $Ga_2O_3$ doped thin film by simple doping method using Mg acetate solution. Both undoped $Ga_2O_3$ thin films and Mg-doped $Ga_2O_3$ thin films were grown on Si substrates at 600 and $900^{\circ}C$ for 30 minutes by means of a customized MOCVD method. As a result of the surface analysis, there were no obvious morphological differences by Mg impurity implantation. The surface of the thin film grown at $900^{\circ}C$ was rougher than those grown at $600^{\circ}C$ and polycrystallization was achieved. As a result of the optical property analysis, in the case of the doped sample, the overall emission peak was red shifted and the UV radiation intensity was increased. As a result of the I-V curve, the leakage current of the $600^{\circ}C$ growth thin film decreased by the Mg impurity and the photocurrent of the growth thin film of $900^{\circ}C$ increased.

• Journal of the Korean Magnetics Society
• /
• v.21 no.6
• /
• pp.214-218
• /
• 2011

In this study, we have systematically investigated the effect of sputtering conditions on the microstructural properties of Ag/CoFeB thin film on MgO substrate. It was found that the crystallinity and surface roughness of the Ag film strongly depends on the Ar sputtering pressure and sputtering power. Epitaxial growth of Ag(100) film on MgO(100) substrate was achieved under the sputtering conditions of high sputtering power and elevated temperature. XRR (X-ray reflectivity) and high-resolution TEM (transmission electron microscopy) measurements also revealed the interfacial roughening in the Ag/CoFeB interface due to the island structure formation and intermixing between Ag and CoFeB.

• Proceedings of the KIEE Conference
• /
• 2006.07c
• /
• pp.1380-1381
• /
• 2006

본 연구는 MgO 박막을 유도 결합 플라즈마를 이용하여, $CF_4/Ar$ 가스 혼합비로 식각하였고, RF 전력, DC-bais 전압과 Process Pressure를 변경하면서 실험하였다. 빛 방출 분석(optical emission spectroscopy, OES)을 이용하여, 플라즈마 진단과 식각 특성과의 관계를 분석하였다. OES 결과로부터 $CF_4$ 첨가비를 50%까지는 증가시킴에 따라 식각률이 증가하였고, 그 후에 Ar 이온이 감소함으로써 식각률이 감소하였다. MgO 박막의 최고 식각률은 50%의 $CF_4/(CF_{4}+Ar)$에서 700 W의 RF 전력, -150 V의 DC-bias 전압, 반응로 압력은 15 mTorr, 기판 온도는 $30^{\circ}C$로 고정시켰을 때 29nm/min이었다. 이 조건에서 MgO 박막과 $SiO_2$의 선택비는 0.06 이었다.

• Journal of the Korean Vacuum Society
• /
• v.12 no.2
• /
• pp.112-117
• /
• 2003

MgO films is widely used in plasma display panel (PDP) technology. In this work, structural and optical properties of the MgO films deposited by e-beam evaporation, reactive magnetron sputtering, which are commercially used, and arc deposition were compared. MgO thin films were deposited on glass substrates by vacuum arc deposition equipment using a magnesium metal target at various oxygen gas flows. In order to investigate the packing density by ellipsometer, to measure reasonable erosion-rates of the MgO protective layers, we introduced an acceleration test method, namely, Ar+ ion beam induced erosion test. Also, XPS and UV test were adopted to examine the effect of the moisture on the optical transmittance of the MgO protective layers, which showed that these of MgO films by arc deposition method sustained more 90% and were insensitive to effect of the moisture. XRD and AFM have been also used to study behaviors of the structure and surface morphology.

• Journal of the Korean Ceramic Society
• /
• v.36 no.2
• /
• pp.116-121
• /
• 1999

0.5 wt%Nb-doped SrTiO3(Nb: STO) thin film was prepared on MgO(100) single crystal substrates by Pulsed Laser Deposition (PLD). The Crystallinity and the orientation of Nb:STO thin films were characterized by XRD with changing the thin film processing condition-oxygen partial pressure, substrate temperature, deposition time and the distance between target and substrate. The orientation of Nb:STO thin film showed (100), (110) and (111) orientations at the substrate temperature of $700^{\circ}C$. The lattice parameter of Nb:STO decreased with increasing Po2 and showed 0.3905 nm at Po2=100 Pa, which was similar to that of the bulk. The thickness of Nb:STO thin film increased with increasing the deposition time and with decreasing the distance between target and substrate.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2000.10a
• /
• pp.144.2-144
• /
• 2000

• Journal of the Korean Vacuum Society
• /
• v.9 no.3
• /
• pp.249-253
• /
• 2000

We have analyzed electrical characteristics of the amorphous $MgTiO_3$thin films deposited by pulsed laser deposition (PLD) technique with the temperature of 400~$500^{\circ}C$. The electrical characteristics of $MgTiO_3$films heavily depend on the deposition temperature. We speculate that the density of anomalous positive charge (APC) substantially increases as the deposition temperature lowers, causing the HF C-V curves shift to the direction of the negative gate voltage. We further observed that both the degree of C-V shift as a function of the deposition temperature and the density of APC were minimized by the use of $SiO_2$with thickness of approximately 100 $\AA$ between $MgTiO_3$films and the Si substrate.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1996.06a
• /
• pp.180-181
• /
• 1996

적외선 센서의 재료로 활용되고 있는 ppLT 박막(두께:8000~9000$\AA$)을 ppt/MgO(100)의 하부 구조상에 50$0^{\circ}C$ 및 $600^{\circ}C$에서 스퍼터링 증착하여 결정성 및 전기적 특성을 조사하였다. $600^{\circ}C$로 in-situ 성장된 ppLT 박막은 c-축(00l) 방향으로 배향 성장되었 고, 비유전상수(r)와 유전정접(tan)의 값이 10kHz~100kHz의 주파수에서 $\varepsilon$r≒35와 tan$\delta$≒ 0.01로 나타났다. 잔류분극량(2ppr)과 초전계수(${\gamma}$)는 상온부근에서 2ppr≒5$\mu$C/cm2, ${\gamma}$≒4$\times$ 10-8C/cm2.$^{\circ}C$로 비교적 양호한 초전박막의 전기적 특성을 나타내었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2005.07a
• /
• pp.197-198
• /
• 2005

본 논문에서는 p-type (100)Si. (100)MgO 그리고 MgO/Si 기판 위에 RF Magnetron sputtering 법으로 $Ba_{0.5}Sr_{0.5}TiO_3$(BST) 박막을 증착 후 $600^{\circ}C$ 의 질소분위에서 RTA(Rapid Thermal Annealing)를 이용한 1 분간의 고온 급속열처리를 하였다. XRD 측정결과 모든 기판에서 (110) $Ba_{0.5}Sr_{0.5}TiO_3$의 주피크가 관찰되어졌고, 열처리 후 피크 세기가 증가함을 확인할 수 있었다. C-V 특성에서 각각의 기판에서 측정된 커패시턴스 값으로 계산된 유전율은 120(bare Si), 305(MgO/Si) 그리고 310(MgO)이었다. 누설 전류 특성에서는 150KV/cm이내의 인가전계에서 0.1$uA/cm^2$이하의 안정된 누설전류값을 보여주었다. 결론적으로 MgO 버퍼층을 이용한 기판이 BST 박막의 증착을 위한 기판으로써 효과적임을 알 수 있었다.